nscrtv-hfcems-common-mib.txt

内有HFC网管系统中所要管理设备的MIB库资料

::= { commonRfGroup 3 }
commonForwardPathReceiveLevel OBJECT-TYPE
SYNTAX INTEGER (0..127)
ACCESS read-only
STATUS optional
DESCRIPTION
"下行信道接收功率电平，单位为dBuV。"
::= { commonRfGroup 4 }
commonMaxReturnPower OBJECT-TYPE
SYNTAX INTEGER (0..127)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"最大上行信道功率电平，单位为dBuV。
此对象的值应保存在非易失性存储器中。"
::= { commonRfGroup 5 }
-- ************
-- *代理管理组
-- ************
commonAgentBootWay OBJECT-TYPE
SYNTAX INTEGER {
bootDefault (1),
bootBOOTP (2),
bootTFTP (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"代理启动方法"
::= { commonAgentGroup 1 }
commonAgentReset OBJECT-TYPE
SYNTAX INTEGER { reset(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"代理重启动，写入‘1’将使代理重新启动，写入其它值将不起作用。读此对象时返回
值‘1’，对代理无影响。"
::= { commonAgentGroup 2 }
commonAgentMaxTraps OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"代理检测到告警时向管理机发送TRAP的最大次数，0表示采用厂商的预设缺省值。"
::= { commonAgentGroup 3 }
commonAgentTrapMinInterval OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"代理发送TRAP的最小间隔，单位为s。"
::= { commonAgentGroup 4 }
commonAgentTrapMaxInterval OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"代理发送TRAP的最大间隔，单位为s。"
::= { commonAgentGroup 5 }
commonTrapAck OBJECT-TYPE
SYNTAX OCTET STRING ( SIZE ( 17..255 ) )
ACCESS read-write
STATUS optional
DESCRIPTION
"该变量用于通知Snmp代理，它所发出的告警Trap信息管理主机已经收到，不用重发。该
变量的内容和告警MIB 中alarmLogInformation 相同。代理收到后通过分析
alarmLogInformation 可以明确地知道管理主机应答的是哪一条告警Trap信息，从而停止
该告警Trap信息的重发。"
::= { commonAgentGroup 6 }
commonAgentTrapTable OBJECT-TYPE
SYNTAX SEQUENCE OF CommonAgentTrapEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"代理TRAP信息表。"
::= { commonAgentGroup 7 }
commonAgentTrapEntry OBJECT-TYPE
SYNTAX CommonAgentTrapEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"代理TRAP信息表目。"
INDEX { commonAgentTrapIndex }
::= { commonAgentTrapTable 1 }
CommonAgentTrapEntry ::= SEQUENCE {
commonAgentTrapIndex
INTEGER,
commonAgentTrapIP
IpAddress,
commonAgentTrapCommunity
DisplayString,
commonAgentTrapStatus
INTEGER
}
commonAgentTrapIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"TRAP表索引。"
::= { commonAgentTrapEntry 1 }
commonAgentTrapIP OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"发TRAP时目的主机的IP地址。"
::= { commonAgentTrapEntry 2 }
commonAgentTrapCommunity OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..64))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"发送TRAP时的共同体字符串。"
::= { commonAgentTrapEntry 3 }
commonAgentTrapStatus OBJECT-TYPE
SYNTAX INTEGER {
commonAgentTrapEnable (1),
commonAgentTrapDisable (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"表示该TRAP项是否启用。"
::= { commonAgentTrapEntry 4 }
-- ***************
-- * 设备管理组
-- ***************
commonDeviceNum OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"表示该代理当前正在管理的设备数量。"
::= { commonDeviceGroup 1 }
commonDeviceInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF CommonDeviceInfoEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"代理当前正在管理的设备公共信息列表。"
::= { commonDeviceGroup 2 }
commonDeviceInfoEntry OBJECT-TYPE
SYNTAX CommonDeviceInfoEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"代理当前正在管理的设备公共信息列表表目。"
INDEX { commonDeviceSlot }
::= { commonDeviceInfoTable 1 }
CommonDeviceInfoEntry ::= SEQUENCE {
commonDeviceSlot
INTEGER,
commonDevicesID
OCTET STRING,
commonDeviceVendor
DisplayString,
commonDeviceModelNumber
DisplayString,
commonDeviceSerialNumber
DisplayString,
commonDeviceVendorInfo
DisplayString,
commonDeviceStatus
OCTET STRING,
commonDeviceReset
INTEGER,
commonDeviceAlarmDetectionControl
INTEGER,
commonDeviceMACAddress
NetworkAddress,
commonDeviceTamperStatus
INTEGER,
commonDeviceInternalTemperature
INTEGER,
commonDeviceResetCause
INTEGER,
commonDeviceCraftStatus
INTEGER,
commonDevicesOID
OBJECT IDENTIFIER,
commonDeviceAcct
Counter,
commonDeviceName
DisplayString,
commonDeviceMFD
DisplayString,
commonDeviceFW
DisplayString
}
commonDeviceSlot OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"代理当前正在管理的设备公共信息列表的表索引。"
::= { commonDeviceInfoEntry 1 }
commonDevicesID OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..40))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"厂商指定的设备的标识"
::= { commonDeviceInfoEntry 2 }
commonDeviceVendor OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"设备生产厂家。"
::= { commonDeviceInfoEntry 3 }
commonDeviceModelNumber OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"设备的型号。"
::= { commonDeviceInfoEntry 4 }
commonDeviceSerialNumber OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"设备的串号。"
::= { commonDeviceInfoEntry 5 }
commonDeviceVendorInfo OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
ACCESS read-only
STATUS optional
DESCRIPTION
"设备供应商的其它特殊指定信息。"
::= { commonDeviceInfoEntry 6 }
commonDeviceStatus OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"设备状态
Bit 0: RSVD0
Bit 1: RSVD1
Bit 2: RSVD2
Bit 3: MAJOR ALARMS
Bit 4: MINOR ALARMS
Bit 5: RSVD5
Bit 6: RSVD6
Bit 7: RSVD7"
::= { commonDeviceInfoEntry 7 }
commonDeviceReset OBJECT-TYPE
SYNTAX INTEGER { reset (1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"写入‘1’将复位设备，写入其它值将不起作用。读此对象时返回值‘1’，对设备无
影响。"
::= { commonDeviceInfoEntry 8 }
commonDeviceAlarmDetectionControl OBJECT-TYPE
SYNTAX INTEGER {
detectionDisabled (1),
detectionEnabled (2),
detectionEnabledAndRegenerate (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"此对象用于控制设备的告警检测。"
::= { commonDeviceInfoEntry 9 }
commonDeviceMACAddress OBJECT-TYPE
SYNTAX NetworkAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"设备MAC地址。"
::= { commonDeviceInfoEntry 10 }
commonDeviceTamperStatus OBJECT-TYPE
SYNTAX INTEGER { intact (1), compromised (2) }
ACCESS read-only
STATUS optional
DESCRIPTION
"报告设备的安全开关(如盖子是否打开)状态，此对象要求在离散属性表中对应一个条目。
intact表示正常，compromised表示告警。"
::= { commonDeviceInfoEntry 11 }
commonDeviceInternalTemperature OBJECT-TYPE
SYNTAX INTEGER (-128..127)
ACCESS read-only
STATUS optional
DESCRIPTION
"设备的室（机）内温度，单位为摄氏度。此对象要求在属性表中对应一个条目。"
::= { commonDeviceInfoEntry 12 }
commonDeviceResetCause OBJECT-TYPE
SYNTAX INTEGER {
other (1),
powerup (2),
command (3),
watchdog (4),
craft (5)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"表示设备最近一次复位的原因。"
::= { commonDeviceInfoEntry 13 }
commonDeviceCraftStatus OBJECT-TYPE
SYNTAX INTEGER {
disconnected (1),
connected (2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"此对象表示设备本地接口（如RS232或RS485接口）的状态。"
::= { commonDeviceInfoEntry 14 }
commonDevicesOID OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"目标标识符串，指向该设备的具体实现。"
::= { commonDeviceInfoEntry 15 }
commonDeviceAcct OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS optional
DESCRIPTION
"表示设备的累计工作时间，单位为s。"
::= { commonDeviceInfoEntry 16 }
commonDeviceName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"设备名称。"
::= { commonDeviceInfoEntry 17 }
commonDeviceMFD OBJECT-TYPE
SYNTAX DisplayString (SIZE(10))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"设备生产日期。"
::= { commonDeviceInfoEntry 18 }
commonDeviceFW OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"设备固件信息。"
::= { commonDeviceInfoEntry 19 }
-- *
-- * hfcColdStart和 hfcWarmStart 陷阱用于替代标准SNMP陷阱coldStart和warmStart，以便
-- * 将应答器物理地址包含在陷阱消息中。
-- * TRAP-TYPE宏由RFC 1215定义。
-- *
hfcColdStart TRAP-TYPE
ENTERPRISE nscrtvHFCemsTree
VARIABLES { commonPhysAddress, commonNELogicalID}
DESCRIPTION
"hfcColdStart陷阱表示发送方协议实体正重新初始化，并且代理配置或协议实体可能有
改变。此陷阱仅在应答器注册成功后发送。"
::= 0
hfcWarmStart TRAP-TYPE
ENTERPRISE nscrtvHFCemsTree
VARIABLES { commonPhysAddress, commonNELogicalID }
DESCRIPTION
"hfcWarmStart陷阱表示发送方协议实体正重新初始化，并且代理配置或协议实体没有任
何改变。此陷阱仅在应答器注册完成后发送。"
::= 2
END