nscrtv-hfcems-upstreamopticalreceiver-mib.txt

内有HFC网管系统中所要管理设备的MIB库资料

NSCRTV-HFCEMS-UPSTREAMOPTICALRECEIVER-MIB DEFINITIONS::=BEGIN
   IMPORTS
      OBJECT-TYPE       
         FROM RFC-1212
      DisplayString 
         FROM RFC1213-MIB
      uporIdent
         FROM NSCRTV-ROOT
;

uporVendorOID OBJECT-TYPE 
   SYNTAX OBJECT IDENTIFIER
   ACCESS read-only
   STATUS optional
   DESCRIPTION
"此对象提供厂商对上行光接收机MIB的扩充，无扩充时此对象应指向上行光接收机节点
uporIdent。"
   ::={ uporIdent 1 }

uporSlotNumber OBJECT-TYPE 
   SYNTAX INTEGER ( 0..32767 )
   ACCESS read-write
   STATUS mandatory
   DESCRIPTION
"上行光接收机数量或机架插槽数量。"
   ::={ uporIdent 2 }
 
uporDeviceTable OBJECT-TYPE
   SYNTAX SEQUENCE OF UporDeviceEntry
   ACCESS not-accessible
   STATUS mandatory 
   DESCRIPTION
"上行光接收机信息表。"
   ::={ uporIdent 3 }

uporDeviceEntry OBJECT-TYPE 
   SYNTAX UporDeviceEntry
   ACCESS not-accessible
   STATUS mandatory 
   DESCRIPTION
"上行光接收机信息表目。"
   INDEX { uporIndex }
   ::={ uporDeviceTable 1 }

UporDeviceEntry::=
   SEQUENCE 
  {
      uporIndex
         INTEGER,
      uporOpicalInputPower
         INTEGER,
      uporOutputRFAttenuationArea
         INTEGER,
      uporOutputRFAttenuation
         INTEGER,
      uporAGControl
         INTEGER
   }

uporIndex OBJECT-TYPE 
   SYNTAX INTEGER ( 0..32767 )
   ACCESS read-only
   STATUS mandatory
   DESCRIPTION
"光接收机索引。"
   ::={ uporDeviceEntry 1 }

uporOpicalInputPower OBJECT-TYPE 
   SYNTAX INTEGER ( -32768..32767 )
   ACCESS read-only
   STATUS mandatory
   DESCRIPTION
"输入光功率,单位为0.1dBm。此对象要求在属性MIB中登记一个条目。"
   ::={ uporDeviceEntry 2 }

uporOutputRFAttenuationArea OBJECT-TYPE 
   SYNTAX INTEGER ( 0..127 )
   ACCESS read-only
   STATUS optional
   DESCRIPTION
"最大输出射频衰减量,单位为dB。"
   ::={ uporDeviceEntry 3 }

uporOutputRFAttenuation OBJECT-TYPE 
   SYNTAX INTEGER ( 0..127 )
   ACCESS read-write
   STATUS optional
   DESCRIPTION
"输出射频信号衰减量,单位为dB。"
   ::={ uporDeviceEntry 4 }

uporAGControl OBJECT-TYPE 
   SYNTAX INTEGER { off(1),on(2) }
   ACCESS read-write
   STATUS optional
   DESCRIPTION
"AGC控制使能。"
   ::={ uporDeviceEntry 5 }

uporNumberDCPowerSupply OBJECT-TYPE 
   SYNTAX INTEGER ( 0..16 )
   ACCESS read-only
   STATUS mandatory
   DESCRIPTION
"直流电源数量，‘0’表示应答器不支持此功能"
   ::={ uporIdent 4 }

uporDCPowerSupplyMode OBJECT-TYPE 
   SYNTAX INTEGER { loadsharing(1),switchedRedundant(2),aloneSupply(3) }
   ACCESS read-only
   STATUS optional
   DESCRIPTION
"供电电源工作模式。"
   ::={ uporIdent 5 }

uporDCPowerTable OBJECT-TYPE
   SYNTAX SEQUENCE OF UporDCPowerEntry
   ACCESS not-accessible
   STATUS mandatory
   DESCRIPTION
"直流电源信息表。"
   ::={ uporIdent 6 }

uporDCPowerEntry OBJECT-TYPE
   SYNTAX UporDCPowerEntry
   ACCESS not-accessible
   STATUS mandatory
   DESCRIPTION
"直流电源信息表目。"
   INDEX { uporDCPowerIndex }
   ::={ uporDCPowerTable 1 }

UporDCPowerEntry::=
   SEQUENCE
   {
      uporDCPowerIndex
         INTEGER,
      uporDCPowerVoltage
         INTEGER,
      uporDCPowerCurrent
         INTEGER,
      uporDCPowerName
         DisplayString
   }

uporDCPowerIndex OBJECT-TYPE
   SYNTAX INTEGER 
   ACCESS read-only
   STATUS mandatory
   DESCRIPTION
"直流电源索引。"
   ::={ uporDCPowerEntry 1 }

uporDCPowerVoltage OBJECT-TYPE
   SYNTAX INTEGER (-32768..32767)
   ACCESS read-only
   STATUS mandatory
   DESCRIPTION
"电源电压，单位为0.1V。此对象要求在属性MIB中登记一个条目。"
   ::={ uporDCPowerEntry 2 }

uporDCPowerCurrent OBJECT-TYPE
   SYNTAX INTEGER (0..65535)
   ACCESS read-only
   STATUS optional
   DESCRIPTION
"电源的电流，单位为0.1A。此对象要求在属性MIB中登记一个条目。"
   ::={ uporDCPowerEntry 3 }

uporDCPowerName OBJECT-TYPE
   SYNTAX DisplayString
   ACCESS read-only
   STATUS mandatory
   DESCRIPTION
"标明电源的名称，例如：24V直流电源。
此字段值由用户规定，至少应标明工作电压并将多个电源相互区分开。
当表中的对象产生告警时，此对象名称应放进hfcAlarmEvent陷阱的alarmText对象里（见
附录D）。"
   ::={ uporDCPowerEntry 4 }


END