nscrtv-hfcems-qammod-mib.txt

内有HFC网管系统中所要管理设备的MIB库资料

NSCRTV-HFCEMS-QAMMOD-MIB DEFINITIONS::=BEGIN
   IMPORTS
      OBJECT-TYPE       
         FROM RFC-1212
      DisplayString 
         FROM RFC1213-MIB
      qammodIdent
         FROM NSCRTV-ROOT
;
qamMOdVendorOID OBJECT-TYPE
   SYNTAX OBJECT IDENTIFIER
   ACCESS read-only
   STATUS optional
   DESCRIPTION
"此对象提供厂商对QAM调制器MIB的扩充。无扩充时此对象应指向QAM调制器节点"
   ::={ qammodIdent 1 }

qamModmode OBJECT-TYPE
   SYNTAX INTEGER ( 1..6 )
   ACCESS read-write
   STATUS mandatory
   DESCRIPTION
"QAM模式,包括16、32、64、128、256、预留,共6种。"
   ::={ qammodIdent 2 }

qamModsymbolrate OBJECT-TYPE
   SYNTAX INTEGER ( 0..65535 )
   ACCESS read-write
   STATUS mandatory
   DESCRIPTION
"符号率，正常范围为1150..7000，单位为ksym/s。此对象要求在属性MIB中登记一个条
目。"
   ::={ qammodIdent 3 }

qamModRFfreq OBJECT-TYPE
   SYNTAX INTEGER 
   ACCESS read-write
   STATUS mandatory
   DESCRIPTION
"RF频率,单位为Hz。此对象要求在属性MIB中登记一个条目。"
   ::={ qammodIdent 4 }

qamModRFLevel OBJECT-TYPE
   SYNTAX INTEGER 
   ACCESS read-write
   STATUS optional
   DESCRIPTION
"RF输出电平，单位为dBuV。此对象要求在属性MIB中登记一个条目。"
   ::={ qammodIdent 5 }

qamModInputInterface OBJECT-TYPE
   SYNTAX INTEGER {
      asi (1),
      spi (2),
      ds3 (3),
      other (4)
   }
   ACCESS read-only
   STATUS mandatory
   DESCRIPTION
"输入接口类型有asi、spi、ds3和其它。"
   ::={ qammodIdent 6 }

qamModstatus OBJECT-TYPE
   SYNTAX INTEGER {
sync (1),
nasync (2)
}
   ACCESS read-only
   STATUS mandatory
   DESCRIPTION
"调制状态有‘1'同步和‘2'不同步两种。"
   ::={ qammodIdent 7 }

qamModTSpacketlen OBJECT-TYPE
   SYNTAX INTEGER {
      bytes188 (1),
      bytes204 (2)
   }
   ACCESS read-write
   STATUS mandatory
   DESCRIPTION
"输入TS流包长度，‘1'表示188字节，‘2'表示204字节。"
   ::={ qammodIdent 8 }

--***********
--*直流电源
--***********

qamModNumberDCPowerSupply OBJECT-TYPE
   SYNTAX INTEGER ( 0..16 )
   ACCESS read-only
   STATUS mandatory
   DESCRIPTION
"内部直流电源的数目，‘0’表示设备无此功能。"
   ::={ qammodIdent 9 }

qamModDCPowerSupplyMode OBJECT-TYPE
   SYNTAX INTEGER {
loadsharing (1),
switchedRedundant (2),
aloneSupply (3)
}
   ACCESS read-only
   STATUS optional
   DESCRIPTION
"供电电源工作模式。"
   ::={ qammodIdent 10 }

qamModDCPowerTable OBJECT-TYPE 
   SYNTAX SEQUENCE OF QamModDCPowerEntry
   ACCESS not-accessible
   STATUS mandatory
   DESCRIPTION
"直流电源信息表。"
   ::={ qammodIdent 11 }

qamModDCPowerEntry OBJECT-TYPE

   SYNTAX QamModDCPowerEntry
   ACCESS not-accessible
   STATUS mandatory
   DESCRIPTION
"直流电源信息表目。"
   INDEX { qamModDCPowerIndex }
   ::={ qamModDCPowerTable 1 }

qamModDCPowerEntry::=
   SEQUENCE
   {
qamModDCPowerIndex
INTEGER,
qamModDCPowerVoltage
INTEGER,
qamModDCPowerCurrent
INTEGER,
qamModDCPowerName
DisplayString
}

qamModDCPowerIndex OBJECT-TYPE
   SYNTAX INTEGER 
   ACCESS read-only
   STATUS mandatory
   DESCRIPTION
"直流电源索引。"
   ::={ qamModDCPowerEntry 1 }

qamModDCPowerVoltage OBJECT-TYPE
   SYNTAX INTEGER (-32768..32767)
   ACCESS read-only
   STATUS mandatory
   DESCRIPTION
"电源电压，单位为0.1V。此对象要求在属性MIB中登记一个条目。"
   ::={ qamModDCPowerEntry 2 }

qamModDCPowerCurrent OBJECT-TYPE
   SYNTAX INTEGER (0..65535)
   ACCESS read-only
   STATUS optional
   DESCRIPTION
"电源的电流，单位为0.01A。此对象要求在属性MIB中登记一个条目。"
   ::={ qamModDCPowerEntry 3 }

qamModDCPowerName OBJECT-TYPE
   SYNTAX DisplayString
   ACCESS read-only
   STATUS mandatory
   DESCRIPTION
"标明电源的名称，例如：24V直流电源。
此字段值由用户规定，至少应标明工作电压并将多个电源相互区分开。
当这张表里的对象产生告警时，此对象名称应放进hfcAlarmEvent陷阱的alarmText对象
里。"
   ::={ qamModDCPowerEntry 4 }

END