📄 hardware.h
字号:
/* * linux/include/asm-arm/arch-trio/hardware.h * * Copyright (C) 1996 Russell King. * * This file contains the hardware definitions of the APLIO TRIO series machines. */#ifndef __ASM_ARCH_HARDWARE_H#define __ASM_ARCH_HARDWARE_H/* * What hardware must be present */#ifndef __ASSEMBLER__typedef unsigned long u_32;/* ARM asynchronous clock */#define ARM_CLK ((u_32)(24000000))/* ARM synchronous with OAK clock */#define A_O_CLK ((u_32)(20000000))#else#define ARM_CLK 24000000#define A_O_CLK 20000000#endif#ifndef __ASSEMBLER__/* * RAM definitions */#define MAPTOPHYS(a) ((unsigned long)a)#define KERNTOPHYS(a) ((unsigned long)(&a))#define GET_MEMORY_END(p) ((p->u1.s.page_size) * (p->u1.s.nr_pages))#define PARAMS_BASE 0x1000//#define KERNEL_BASE (PAGE_OFFSET + 0x80000)#endif#define IO_BASE 0#define PERIPH_BASE 0xff000000#define OAKA_PRAM 0xfd000000#define OAKB_PRAM 0xfe000000#define SRAM_BASE 0xfc000000#define SRAM_SIZE 0x1000#define DPMBA_BASE 0xfa000000#define DPMBB_BASE 0xfb000000#define DPMB_SIZE 0x800#define BOOTROM_BASE 0xfb000000#define BOOTROM_SIZE 0x400/* Peripherials*/ #define SIAP_BASE (PERIPH_BASE+0)#define SMC_BASE (PERIPH_BASE+0x4000)#define DMC_BASE (PERIPH_BASE+0x8000)#define PIOA_BASE (PERIPH_BASE+0xc000)#define PIOB_BASE (PERIPH_BASE+0x10000)#define KB_BASE (PERIPH_BASE+0x10000)#define TMC_BASE (PERIPH_BASE+0x14000)#define USARTA_BASE (PERIPH_BASE+0x18000)#define USARTB_BASE (PERIPH_BASE+0x1c000)#define SPI_BASE (PERIPH_BASE+0x20000)#define WDG_BASE (PERIPH_BASE+0x28000)#define AIC_BASE (PERIPH_BASE+0x30000)/* SIAP registers*/ #define SIAP_MD (SIAP_BASE)#define SIAP_ID (SIAP_BASE+4)#define SIAP_RST (SIAP_BASE+8)/* SIAP mode register */#define SIAP_SW2 (1<<11)#define SIAP_SW1 (1<<10)#define SIAP_LPCS(x)(x<<8 & 0x300)#define SIAP_LP (1<<6)#define SIAP_CS (1<<5)#define SIAP_IB (1<<4)#define SIAP_IA (1<<3)#define SIAP_RB (1<<2)#define SIAP_RA (1<<1)#define SIAP_RM (1)/* SIAP ID register */#define SIAP_PKG (1<<31)#define SIAP_VERS (1) /* SIAP reset register */#define SIAP_RESET (7) /* DRAM Memory controller registers*/ #define DMR0 (DMC_BASE + 0) #define DMR1 (DMC_BASE + 4)#define DMC_CR (DMC_BASE + 8)/* DMRx registers */#define DMR_EMR 1#define DMR_PS(x) (x<<1 & 6)#define DMR_SZ(x) (x<<3 & 0x18)/* DMR memory control register */#define DMR_ROR (1<<2)#define DMR_BBR (1<<1)#define DMR_DBW 1/* Static Memory controller registers*/ #define SMC_CSR0 (SMC_BASE + 0) #define SMC_CSR1 (SMC_BASE + 4) #define SMC_CSR2 (SMC_BASE + 8) #define SMC_CSR3 (SMC_BASE + 0xc) #define SMC_MCR (SMC_BASE + 0x24) /* SMC chip select registers */#define SMC_CSEN (1<<13)#define SMC_BAT (1<<12)#define SMC_TDF(x) (x<<9 & 0xe000)#define SMC_PGS(x) (x<<7 & 0x1800)#define SMC_WSE (1<<5)#define SMC_NWS(x) (x<<2 & 0x1c)#define SMC_DBW(x) (x & 3)/* SMC memory control register */#define SMC_DRP (1<<4)/* Dual Port Memory A*/#define DPMBA_S0 (DPMBA_BASE + 0x200)#define DPMBA_S1 (DPMBA_BASE + 0x204)#define DPMBA_S2 (DPMBA_BASE + 0x208)#define DPMBA_S3 (DPMBA_BASE + 0x20c)#define DPMBA_S4 (DPMBA_BASE + 0x210)#define DPMBA_S5 (DPMBA_BASE + 0x214)#define DPMBA_S6 (DPMBA_BASE + 0x218)#define DPMBA_S7 (DPMBA_BASE + 0x21c)#define DPMBA_CC (DPMBA_BASE + 0x220)/* Dual Port Memory B*/ #define DPMBB_S0 (DPMBB_BASE + 0x200)#define DPMBB_S1 (DPMBB_BASE + 0x204)#define DPMBB_S2 (DPMBB_BASE + 0x208)#define DPMBB_S3 (DPMBB_BASE + 0x20c)#define DPMBB_S4 (DPMBB_BASE + 0x210)#define DPMBB_S5 (DPMBB_BASE + 0x214)#define DPMBB_S6 (DPMBB_BASE + 0x218)#define DPMBB_S7 (DPMBB_BASE + 0x21c)#define DPMBB_CC (DPMBB_BASE + 0x220)/* Timer registers*/#define TC0_BASE (TMC_BASE + 0)#define TC1_BASE (TMC_BASE + 0x40)#define TC2_BASE (TMC_BASE + 0x80)#define TC_OFFSET 0x14000#define TC_BASE(i) (PERIPH_BASE+TC_OFFSET+(i)*0x40)#define TC_BCR (TMC_BASE + 0xC0)#define TC_BMR (TMC_BASE + 0xC4)#ifndef __ASSEMBLER__struct trio_timer_channel{ unsigned long ccr; // channel control register (WO) unsigned long cmr; // channel mode register (RW) unsigned long reserved[2]; unsigned long cv; // counter value (RW) unsigned long ra; // register A (RW) unsigned long rb; // register B (RW) unsigned long rc; // register C (RW) unsigned long sr; // status register (RO) unsigned long ier; // interrupt enable register (WO) unsigned long idr; // interrupt disable register (WO) unsigned long imr; // interrupt mask register (RO)};struct trio_timers{ struct { struct trio_timer_channel ch; unsigned char padding[0x40-sizeof(struct trio_timer_channel)]; } chans[3]; unsigned long bcr; // block control register (WO) unsigned long bmr; // block mode register (RW)};#endif/* TC control register */#define TC_SYNC (1)/* TC mode register */#define TC2XC2S(x) (x & 0x3)#define TC1XC1S(x) (x<<2 & 0xc)#define TC0XC0S(x) (x<<4 & 0x30)/* TC channel control */#define TC_CLKEN (1) #define TC_CLKDIS (1<<1) #define TC_SWTRG (1<<2) /* TC interrupts enable/disable/mask and status registers */#define TC_MTIOB (1<<18)#define TC_MTIOA (1<<17)#define TC_CLKSTA (1<<16)#define TC_ETRGS (1<<7)#define TC_LDRBS (1<<6)#define TC_LDRAS (1<<5)#define TC_CPCS (1<<4)#define TC_CPBS (1<<3)#define TC_CPAS (1<<2)#define TC_LOVRS (1<<1)#define TC_COVFS (1)#ifndef __ASSEMBLER__/* UART registers*/struct uart_regs{ u_32 cr; // control u_32 mr; // mode u_32 ier; // interrupt enable u_32 idr; // interrupt disable u_32 imr; // interrupt mask u_32 csr; // channel status u_32 rhr; // receive holding u_32 thr; // tramsmit holding u_32 brgr; // baud rate generator u_32 rtor; // rx time-out u_32 ttgr; // tx time-guard u_32 res1; u_32 rpr; // rx pointer u_32 rcr; // rx counter u_32 tpr; // tx pointer u_32 tcr; // tx counter u_32 mc; // modem control u_32 ms; // modem status};#endif/* US control register */#define US_SENDA (1<<12)#define US_STTO (1<<11)#define US_STPBRK (1<<10)#define US_STTBRK (1<<9)#define US_RSTSTA (1<<8)#define US_TXDIS (1<<7)#define US_TXEN (1<<6)#define US_RXDIS (1<<5)#define US_RXEN (1<<4)#define US_RSTTX (1<<3)#define US_RSTRX (1<<2)/* US mode register */#define US_CLK0 (1<<18)#define US_MODE9 (1<<17)#define US_CHMODE(x)(x<<14 & 0xc000)#define US_NBSTOP(x)(x<<12 & 0x3000)#define US_PAR(x) (x<<9 & 0xe00)#define US_SYNC (1<<8)#define US_CHRL(x) (x<<6 & 0xc0)#define US_USCLKS(x)(x<<4 & 0x30)/* US interrupts enable/disable/mask and status register */#define US_DMSI (1<<10)#define US_TXEMPTY (1<<9)#define US_TIMEOUT (1<<8)#define US_PARE (1<<7)#define US_FRAME (1<<6)#define US_OVRE (1<<5)#define US_ENDTX (1<<4)#define US_ENDRX (1<<3)#define US_RXBRK (1<<2)#define US_TXRDY (1<<1)#define US_RXRDY (1)#define US_ALL_INTS (US_DMSI|US_TXEMPTY|US_TIMEOUT|US_PARE|US_FRAME|US_OVRE|US_ENDTX|US_ENDRX|US_RXBRK|US_TXRDY|US_RXRDY)/* US modem control register */#define US_FCM (1<<5)#define US_RTS (1<<1)#define US_DTR (1)/* US modem status register */#define US_FCMS (1<<8)#define US_DCD (1<<7)#define US_RI (1<<6)#define US_DSR (1<<5)#define US_CTS (1<<4)#define US_DDCD (1<<3)#define US_TERI (1<<2)#define US_DDSR (1<<1)#define US_DCTS (1)/* Advanced Interrupt Controller registers*/#define AIC_SMR(i) (AIC_BASE+i*4)#define AIC_IVR (AIC_BASE+0x100)#define AIC_FVR (AIC_BASE+0x104)#define AIC_ISR (AIC_BASE+0x108)#define AIC_IPR (AIC_BASE+0x10C)#define AIC_IMR (AIC_BASE+0x110)#define AIC_CISR (AIC_BASE+0x114)#define AIC_IECR (AIC_BASE+0x120)#define AIC_IDCR (AIC_BASE+0x124)#define AIC_ICCR (AIC_BASE+0x128)#define AIC_ISCR (AIC_BASE+0x12C)#define AIC_EOICR (AIC_BASE+0x130)/* AIC enable/disable/mask/pending registers */#define AIC_PIOB (1<<15)#define AIC_UB (1<<14)#define AIC_OAKB (1<<13)#define AIC_OAKA (1<<12)#define AIC_IRQ1 (1<<11)#define AIC_IRQ0 (1<<10)#define AIC_SPI (1<<9)#define AIC_LCD (1<<8)#define AIC_PIOA (1<<7)#define AIC_TC2 (1<<6)#define AIC_TC1 (1<<5)#define AIC_TC0 (1<<4)#define AIC_UA (1<<3)#define AIC_SWI (1<<2)#define AIC_WD (1<<1)#define AIC_FIQ (1)/* PIOA registers*/ #define PIOA_PER (PIOA_BASE+0) #define PIOA_PDR (PIOA_BASE+0x4) #define PIOA_PSR (PIOA_BASE+0x8) #define PIOA_OER (PIOA_BASE+0x10) #define PIOA_ODR (PIOA_BASE+0x14) #define PIOA_OSR (PIOA_BASE+0x18) #define PIOA_IFER (PIOA_BASE+0x20) #define PIOA_IFDR (PIOA_BASE+0x24) #define PIOA_IFSR (PIOA_BASE+0x28) #define PIOA_SODR (PIOA_BASE+0x30) #define PIOA_CODR (PIOA_BASE+0x34) #define PIOA_ODSR (PIOA_BASE+0x38) #define PIOA_PDSR (PIOA_BASE+0x3C) #define PIOA_IER (PIOA_BASE+0x40) #define PIOA_IDR (PIOA_BASE+0x44) #define PIOA_IMR (PIOA_BASE+0x48) #define PIOA_ISR (PIOA_BASE+0x4C) /* PIOA bit allocation */#define PIOA_TCLK0 (1<<8) #define PIOA_TI0A0 (1<<9) #define PIOA_TI0B0 (1<<10) #define PIOA_SCLKA (1<<11) #define PIOA_NPCS1 (1<<12) #define PIOA_SCLKB (1<<13) #define PIOA_NPCS2 (1<<14) #define PIOA_NPCS3 (1<<15) #define PIOA_TCLK2 (1<<16) #define PIOA_TIOA2 (1<<17) #define PIOA_TIOB2 (1<<18) #define PIOA_ACLK (1<<19) /* PIOB registers*/ #define PIOB_PER (PIOB_BASE+0) #define PIOB_PDR (PIOB_BASE+0x4) #define PIOB_PSR (PIOB_BASE+0x8) #define PIOB_OER (PIOB_BASE+0x10) #define PIOB_ODR (PIOB_BASE+0x14) #define PIOB_OSR (PIOB_BASE+0x18) #define PIOB_IFER (PIOB_BASE+0x20) #define PIOB_IFDR (PIOB_BASE+0x24) #define PIOB_IFSR (PIOB_BASE+0x28) #define PIOB_SODR (PIOB_BASE+0x30) #define PIOB_CODR (PIOB_BASE+0x34) #define PIOB_ODSR (PIOB_BASE+0x38) #define PIOB_PDSR (PIOB_BASE+0x3C) #define PIOB_IER (PIOB_BASE+0x40) #define PIOB_IDR (PIOB_BASE+0x44) #define PIOB_IMR (PIOB_BASE+0x48) #define PIOB_ISR (PIOB_BASE+0x4C) /* PIOB bit allocation */#define PIOB_TCLK1 (1) #define PIOB_TIOA1 (1<<1) #define PIOB_TIOB1 (1<<2) #define PIOB_NCTSA (1<<3) #define PIOB_NRIA (1<<5) #define PIOB_NWDOVF (1<<6) #define PIOB_NCE1 (1<<7) #define PIOB_NCE2 (1<<8) #ifndef __ASSEMBLER__struct pio_regs{ u_32 per; u_32 pdr; u_32 psr; u_32 res1; u_32 oer; u_32 odr; u_32 osr; u_32 res2; u_32 ifer; u_32 ifdr; u_32 ifsr; u_32 res3; u_32 sodr; u_32 codr; u_32 odsr; u_32 pdsr; u_32 ier; u_32 idr; u_32 imr; u_32 isr;};#endif/* Serial Peripheral Interface*/#define SP_CR (SPI_BASE + 0)#define SP_MR (SPI_BASE + 4)#define SP_RDR (SPI_BASE + 8)#define SP_TDR (SPI_BASE + 0xC)#define SP_SR (SPI_BASE + 0x10)#define SP_IER (SPI_BASE + 0x14)#define SP_IDR (SPI_BASE + 0x18)#define SP_IMR (SPI_BASE + 0x1C)#define SP_CSR0 (SPI_BASE + 0x30)#define SP_CSR1 (SPI_BASE + 0x34)#define SP_CSR2 (SPI_BASE + 0x38)#define SP_CSR3 (SPI_BASE + 0x3C)#ifndef __ASSEMBLER__struct spi_regs{ u_32 cr; u_32 mr; u_32 rdr; u_32 tdr; u_32 sr; u_32 ier; u_32 idr; u_32 imr; u_32 res1; u_32 res2; u_32 res3; u_32 res4; u_32 csr0; u_32 csr1; u_32 csr2; u_32 csr3;};#endif/* SPI control register */#define SPI_SWRST (1<<7)#define SPI_SPIDIS (1<<1)#define SPI_SPIEN (1)/* SPI mode register */#define SPI_MSTR (1)#define SPI_PS (1<<1)#define SPI_PCSDEC (1<<2)#define SPI_MCSK32 (1<<3)#define SPI_LLB (1<<7)#define SPI_PCS(x) (x<<16 & 0xF0000)#define SPI_DLYBCS(x) (x<<24 & 0xFF000000)/* SPI Receive/Transmit Data Register */#define SPI_PCS_MASK (0xF0000)/* SPI Interrupt enable/disable and Status registers */#define SPI_OVRES (1<<3)#define SPI_MODF (1<<2)#define SPI_TDRE (1<<1)#define SPI_RDRF (1)/* SPI chip selects registers */#define SPI_CPOL (1)#define SPI_NCPHA (1<<1)#define SPI_BITS_MASK 0xF0#define SPI_SCBR_MASK 0xF00#define SPI_DLYBS_MASK 0xF0000#define SPI_DLYBCT_MASK 0xF000000#define SPI_BITS(x) (x<<4 & SPI_BITS_MASK)#define SPI_SCBR(x) (x<<8 & SPI_SCBR_MASK)#define SPI_DLYBS(x) (x<<16 & SPI_DLYBS_MASK)#define SPI_DLYBCT(x) (x<<24 & SPI_DLYBCT_MASK)/* Watchdog registers*/#define WDG_OMR (WD_BASE + 0)#define WDG_CMR (WD_BASE + 4)#define WDG_CR (WD_BASE + 8)#define WDG_SR (WD_BASE + 0xC)/* Overflow Mode Register */#define WDG_OKEY_MASK 0xFFF0#define WDG_OKEY(x) (x<<4 & WDG_OKEY_MASK)#define WDG_EXTEN (1<<3)#define WDG_IRQEN (1<<2)#define WDG_RSTEN (1<<1)#define WDG_WDEN (1)/* Clock Mode Register */#define WDG_CKEY_MASK 0xFF80#define WDG_HPCV_MASK 0x3C#define WDG_WDCLKS_MASK 0x3#define WDG_CKEY(x) (x<<7 & WDG_CKEY_MASK)#define WDG_HPCV(x) (x<<2 & WDG_HPCV_MASK)#define WDG_WDCLKS(x) (x & WDG_WDCLKS_MASK)/* Control Register */#define WDG_RESTART_KEY 0xC071/* Status Register */#define WDG_WDOVF (1)#endif⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -