makefile.in

GTK+-2.0源码之pango-1.15.6.tar.gz

	$(DOC_MODULE).prerequisites \
	$(DOC_MODULE).signals

CLEANFILES = $(SCANOBJ_FILES) $(DOC_MODULE)-unused.txt $(DOC_STAMPS)

########################################################################
man_MANS = pango-querymodules.1 
BUILT_EXTRA_DIST = $(man_MANS)
TESTS = check.docs
all: all-am

.SUFFIXES:
$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am $(top_srcdir)/gtk-doc.make $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
		&& exit 0; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnits  docs/Makefile'; \
	cd $(top_srcdir) && \
	  $(AUTOMAKE) --gnits  docs/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
	esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

$(top_srcdir)/configure:  $(am__configure_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
version.xml: $(top_builddir)/config.status $(srcdir)/version.xml.in
	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@

mostlyclean-libtool:
	-rm -f *.lo

clean-libtool:
	-rm -rf .libs _libs

distclean-libtool:
	-rm -f libtool
uninstall-info-am:
install-man1: $(man1_MANS) $(man_MANS)
	@$(NORMAL_INSTALL)
	test -z "$(man1dir)" || $(mkdir_p) "$(DESTDIR)$(man1dir)"
	@list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \
	l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
	for i in $$l2; do \
	  case "$$i" in \
	    *.1*) list="$$list $$i" ;; \
	  esac; \
	done; \
	for i in $$list; do \
	  if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \
	  else file=$$i; fi; \
	  ext=`echo $$i | sed -e 's/^.*\\.//'`; \
	  case "$$ext" in \
	    1*) ;; \
	    *) ext='1' ;; \
	  esac; \
	  inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
	  inst=`echo $$inst | sed -e 's/^.*\///'`; \
	  inst=`echo $$inst | sed '$(transform)'`.$$ext; \
	  echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
	  $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst"; \
	done
uninstall-man1:
	@$(NORMAL_UNINSTALL)
	@list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \
	l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
	for i in $$l2; do \
	  case "$$i" in \
	    *.1*) list="$$list $$i" ;; \
	  esac; \
	done; \
	for i in $$list; do \
	  ext=`echo $$i | sed -e 's/^.*\\.//'`; \
	  case "$$ext" in \
	    1*) ;; \
	    *) ext='1' ;; \
	  esac; \
	  inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
	  inst=`echo $$inst | sed -e 's/^.*\///'`; \
	  inst=`echo $$inst | sed '$(transform)'`.$$ext; \
	  echo " rm -f '$(DESTDIR)$(man1dir)/$$inst'"; \
	  rm -f "$(DESTDIR)$(man1dir)/$$inst"; \
	done
tags: TAGS
TAGS:

ctags: CTAGS
CTAGS:


check-TESTS: $(TESTS)
	@failed=0; all=0; xfail=0; xpass=0; skip=0; \
	srcdir=$(srcdir); export srcdir; \
	list='$(TESTS)'; \
	if test -n "$$list"; then \
	  for tst in $$list; do \
	    if test -f ./$$tst; then dir=./; \
	    elif test -f $$tst; then dir=; \
	    else dir="$(srcdir)/"; fi; \
	    if $(TESTS_ENVIRONMENT) $${dir}$$tst; then \
	      all=`expr $$all + 1`; \
	      case " $(XFAIL_TESTS) " in \
	      *" $$tst "*) \
		xpass=`expr $$xpass + 1`; \
		failed=`expr $$failed + 1`; \
		echo "XPASS: $$tst"; \
	      ;; \
	      *) \
		echo "PASS: $$tst"; \
	      ;; \
	      esac; \
	    elif test $$? -ne 77; then \
	      all=`expr $$all + 1`; \
	      case " $(XFAIL_TESTS) " in \
	      *" $$tst "*) \
		xfail=`expr $$xfail + 1`; \
		echo "XFAIL: $$tst"; \
	      ;; \
	      *) \
		failed=`expr $$failed + 1`; \
		echo "FAIL: $$tst"; \
	      ;; \
	      esac; \
	    else \
	      skip=`expr $$skip + 1`; \
	      echo "SKIP: $$tst"; \
	    fi; \
	  done; \
	  if test "$$failed" -eq 0; then \
	    if test "$$xfail" -eq 0; then \
	      banner="All $$all tests passed"; \
	    else \
	      banner="All $$all tests behaved as expected ($$xfail expected failures)"; \
	    fi; \
	  else \
	    if test "$$xpass" -eq 0; then \
	      banner="$$failed of $$all tests failed"; \
	    else \
	      banner="$$failed of $$all tests did not behave as expected ($$xpass unexpected passes)"; \
	    fi; \
	  fi; \
	  dashes="$$banner"; \
	  skipped=""; \
	  if test "$$skip" -ne 0; then \
	    skipped="($$skip tests were not run)"; \
	    test `echo "$$skipped" | wc -c` -le `echo "$$banner" | wc -c` || \
	      dashes="$$skipped"; \
	  fi; \
	  report=""; \
	  if test "$$failed" -ne 0 && test -n "$(PACKAGE_BUGREPORT)"; then \
	    report="Please report to $(PACKAGE_BUGREPORT)"; \
	    test `echo "$$report" | wc -c` -le `echo "$$banner" | wc -c` || \
	      dashes="$$report"; \
	  fi; \
	  dashes=`echo "$$dashes" | sed s/./=/g`; \
	  echo "$$dashes"; \
	  echo "$$banner"; \
	  test -z "$$skipped" || echo "$$skipped"; \
	  test -z "$$report" || echo "$$report"; \
	  echo "$$dashes"; \
	  test "$$failed" -eq 0; \
	else :; fi

distdir: $(DISTFILES)
	$(mkdir_p) $(distdir)/..
	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
	list='$(DISTFILES)'; for file in $$list; do \
	  case $$file in \
	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
	  esac; \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
	    dir="/$$dir"; \
	    $(mkdir_p) "$(distdir)$$dir"; \
	  else \
	    dir=''; \
	  fi; \
	  if test -d $$d/$$file; then \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
	    fi; \
	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
	  else \
	    test -f $(distdir)/$$file \
	    || cp -p $$d/$$file $(distdir)/$$file \
	    || exit 1; \
	  fi; \
	done
	$(MAKE) $(AM_MAKEFLAGS) \
	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
	  dist-hook
check-am: all-am
	$(MAKE) $(AM_MAKEFLAGS) check-TESTS
check: check-am
all-am: Makefile $(MANS) all-local
installdirs:
	for dir in "$(DESTDIR)$(man1dir)"; do \
	  test -z "$$dir" || $(mkdir_p) "$$dir"; \
	done
install: install-am
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-am
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	  `test -z '$(STRIP)' || \
	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:

clean-generic:
	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
clean: clean-am

clean-am: clean-generic clean-libtool clean-local mostlyclean-am

distclean: distclean-am
	-rm -f Makefile
distclean-am: clean-am distclean-generic distclean-libtool

dvi: dvi-am

dvi-am:

html: html-am

info: info-am

info-am:

install-data-am: install-data-local install-man

install-exec-am:

install-info: install-info-am

install-man: install-man1

installcheck-am:

maintainer-clean: maintainer-clean-am
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic \
	maintainer-clean-local

mostlyclean: mostlyclean-am

mostlyclean-am: mostlyclean-generic mostlyclean-libtool

pdf: pdf-am

pdf-am:

ps: ps-am

ps-am:

uninstall-am: uninstall-info-am uninstall-local uninstall-man

uninstall-man: uninstall-man1

.PHONY: all all-am all-local check check-TESTS check-am clean \
	clean-generic clean-libtool clean-local dist-hook distclean \
	distclean-generic distclean-libtool distdir dvi dvi-am html \
	html-am info info-am install install-am install-data \
	install-data-am install-data-local install-exec \
	install-exec-am install-info install-info-am install-man \
	install-man1 install-strip installcheck installcheck-am \
	installdirs maintainer-clean maintainer-clean-generic \
	maintainer-clean-local mostlyclean mostlyclean-generic \
	mostlyclean-libtool pdf pdf-am ps ps-am uninstall uninstall-am \
	uninstall-info-am uninstall-local uninstall-man uninstall-man1


@ENABLE_GTK_DOC_TRUE@all-local: html-build.stamp

#### scan ####

@[e-mail]: $(HFILE_GLOB) $(CFILE_GLOB)
@ENABLE_GTK_DOC_TRUE@	@echo 'gtk-doc: Scanning header files'
@ENABLE_GTK_DOC_TRUE@	@-chmod -R u+w $(srcdir)
@ENABLE_GTK_DOC_TRUE@	if grep -l '^..*$$' $(srcdir)/$(DOC_MODULE).types > /dev/null 2>&1 ; then \
@ENABLE_GTK_DOC_TRUE@	    CC="$(GTKDOC_CC)" LD="$(GTKDOC_LD)" CFLAGS="$(GTKDOC_CFLAGS)" LDFLAGS="$(GTKDOC_LIBS)" gtkdoc-scangobj $(SCANGOBJ_OPTIONS) --module=$(DOC_MODULE) --output-dir=$(srcdir) ; \
@ENABLE_GTK_DOC_TRUE@	else \
@ENABLE_GTK_DOC_TRUE@	    cd $(srcdir) ; \
@ENABLE_GTK_DOC_TRUE@	    for i in $(SCANOBJ_FILES) ; do \
@ENABLE_GTK_DOC_TRUE@               test -f $$i || touch $$i ; \
@ENABLE_GTK_DOC_TRUE@	    done \
@ENABLE_GTK_DOC_TRUE@	fi
@ENABLE_GTK_DOC_TRUE@	cd $(srcdir) && \
@ENABLE_GTK_DOC_TRUE@	  gtkdoc-scan --module=$(DOC_MODULE) --source-dir=$(DOC_SOURCE_DIR) --ignore-headers="$(IGNORE_HFILES)" $(SCAN_OPTIONS) $(EXTRA_HFILES)
@ENABLE_GTK_DOC_TRUE@	touch scan-build.stamp

@ENABLE_GTK_DOC_TRUE@$(DOC_MODULE)-decl.txt $(SCANOBJ_FILES): scan-build.stamp
@ENABLE_GTK_DOC_TRUE@	@true

#### templates ####

@[e-mail]: $(DOC_MODULE)-decl.txt $(SCANOBJ_FILES) $(DOC_MODULE)-sections.txt $(DOC_MODULE)-overrides.txt
@ENABLE_GTK_DOC_TRUE@	@echo 'gtk-doc: Rebuilding template files'
@ENABLE_GTK_DOC_TRUE@	@-chmod -R u+w $(srcdir)
@ENABLE_GTK_DOC_TRUE@	cd $(srcdir) && gtkdoc-mktmpl --module=$(DOC_MODULE) $(MKTMPL_OPTIONS)
@ENABLE_GTK_DOC_TRUE@	touch tmpl-build.stamp

@[e-mail]: tmpl-build.stamp
@ENABLE_GTK_DOC_TRUE@	@true

#### xml ####

@[e-mail]: tmpl.stamp $(CFILE_GLOB) $(srcdir)/tmpl/*.sgml $(expand_content_files)
@ENABLE_GTK_DOC_TRUE@	@echo 'gtk-doc: Building XML'
@ENABLE_GTK_DOC_TRUE@	@-chmod -R u+w $(srcdir)
@ENABLE_GTK_DOC_TRUE@	cd $(srcdir) && \
@ENABLE_GTK_DOC_TRUE@	gtkdoc-mkdb --module=$(DOC_MODULE) --source-dir=$(DOC_SOURCE_DIR) --output-format=xml --expand-content-files="$(expand_content_files)" --main-sgml-file=$(DOC_MAIN_SGML_FILE) $(MKDB_OPTIONS)
@ENABLE_GTK_DOC_TRUE@	touch sgml-build.stamp

@[e-mail]: sgml-build.stamp
@ENABLE_GTK_DOC_TRUE@	@true

#### html ####

@[e-mail]: sgml.stamp $(DOC_MAIN_SGML_FILE) $(content_files)
@ENABLE_GTK_DOC_TRUE@	@echo 'gtk-doc: Building HTML'
@ENABLE_GTK_DOC_TRUE@	@-chmod -R u+w $(srcdir)
@ENABLE_GTK_DOC_TRUE@	rm -rf $(srcdir)/html 
@ENABLE_GTK_DOC_TRUE@	mkdir $(srcdir)/html
@ENABLE_GTK_DOC_TRUE@	cd $(srcdir)/html && gtkdoc-mkhtml $(DOC_MODULE) ../$(DOC_MAIN_SGML_FILE)
@ENABLE_GTK_DOC_TRUE@	test "x$(HTML_IMAGES)" = "x" || ( cd $(srcdir) && cp $(HTML_IMAGES) html )
@ENABLE_GTK_DOC_TRUE@	@echo 'gtk-doc: Fixing cross-references' 
@ENABLE_GTK_DOC_TRUE@	cd $(srcdir) && gtkdoc-fixxref --module-dir=html --html-dir=$(HTML_DIR) $(FIXXREF_OPTIONS)
@ENABLE_GTK_DOC_TRUE@	touch html-build.stamp
@ENABLE_GTK_DOC_FALSE@all-local:

##############

clean-local:
	rm -f *~ *.bak
	rm -rf .libs

maintainer-clean-local: clean
	cd $(srcdir) && rm -rf xml html $(DOC_MODULE)-decl-list.txt $(DOC_MODULE)-decl.txt

install-data-local:
	installfiles=`echo $(srcdir)/html/*`; \
	if test "$$installfiles" = '$(srcdir)/html/*'; \
	then echo '-- Nothing to install' ; \
	else \
	  $(mkinstalldirs) $(DESTDIR)$(TARGET_DIR); \
	  for i in $$installfiles; do \
	    echo '-- Installing '$$i ; \
	    $(INSTALL_DATA) $$i $(DESTDIR)$(TARGET_DIR); \
	  done; \
	  echo '-- Installing $(srcdir)/html/index.sgml' ; \
	  $(INSTALL_DATA) $(srcdir)/html/index.sgml $(DESTDIR)$(TARGET_DIR) || :; \
	fi

uninstall-local:
	rm -f $(DESTDIR)$(TARGET_DIR)/*

#
# Require gtk-doc when making dist
#
@ENABLE_GTK_DOC_TRUE@dist-check-gtkdoc:
@ENABLE_GTK_DOC_FALSE@dist-check-gtkdoc:
@ENABLE_GTK_DOC_FALSE@	@echo "*** gtk-doc must be installed and enabled in order to make dist"
@ENABLE_GTK_DOC_FALSE@	@false

dist-hook: dist-check-gtkdoc dist-hook-local
	mkdir $(distdir)/tmpl
	mkdir $(distdir)/xml
	mkdir $(distdir)/html
	-cp $(srcdir)/tmpl/*.sgml $(distdir)/tmpl
	-cp $(srcdir)/xml/*.xml $(distdir)/xml
	-cp $(srcdir)/html/* $(distdir)/html
	if test -f $(srcdir)/$(DOC_MODULE).types; then \
	  cp $(srcdir)/$(DOC_MODULE).types $(distdir)/$(DOC_MODULE).types; \
	fi

.PHONY : dist-hook-local

@ENABLE_MAN_TRUE@%.1 : %.xml 
@ENABLE_MAN_TRUE@	@XSLTPROC@ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl $<

dist-hook-local:
	files='$(BUILT_EXTRA_DIST)';				\
	for f in $$files; do					\
	  if test -f $$f; then d=.; else d=$(srcdir); fi;	\
	  cp $$d/$$f $(distdir) || exit 1; done;		\
								\
	mkdir $(distdir)/TEXT;					\
	for f in $(srcdir)/TEXT/* ; do				\
	  test -f $$f && cp -p $$f $(distdir)/TEXT;		\
	done
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: