readme.txt

Stellaris公司推出1美元ARM,这是Stellaris驱动库源程序

SSI

This example application uses the SSI master to communicate with the Atmel
AT25F1024A EEPROM that is on the development board.  The first 256 bytes of the
EEPROM are erased and then programmed with an incrementing sequence.  The data
is then read back to verify its correctness.  The transfer is managed by an
interrupt handler in response to the SSI interrupt; since a 256-byte read at a
1MHz SSI bus speed takes around 2ms, this allows a lot of other processing to
occur during the transfer (though that time is not utilized by this example).

-------------------------------------------------------------------------------

Copyright (c) 2005,2006 Luminary Micro, Inc.  All rights reserved.

Software License Agreement

Luminary Micro, Inc. (LMI) is supplying this software for use solely and
exclusively on LMI's Stellaris Family of microcontroller products.

The software is owned by LMI and/or its suppliers, and is protected under
applicable copyright laws.  All rights are reserved.  Any use in violation of
the foregoing restrictions may subject the user to criminal sanctions under
applicable laws, as well as to civil liability for the breach of the terms and
conditions of this license.

THIS SOFTWARE IS PROVIDED "AS IS".  NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR
STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE.  LMI SHALL NOT, IN
ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES,
FOR ANY REASON WHATSOEVER.

This is part of revision 920 of the Stellaris Driver Library.