⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 bulkmem.h

📁 嵌入式系统设计与实验教材二源码linux内核移植与编译
💻 H
字号:
/* * Definitions for bulk memory services * * bulkmem.h 1.12 2000/06/12 21:55:41 * * The contents of this file are subject to the Mozilla Public License * Version 1.1 (the "License"); you may not use this file except in * compliance with the License. You may obtain a copy of the License * at http://www.mozilla.org/MPL/ * * Software distributed under the License is distributed on an "AS IS" * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See * the License for the specific language governing rights and * limitations under the License.  * * The initial developer of the original code is David A. Hinds * <dahinds@users.sourceforge.net>.  Portions created by David A. Hinds * are Copyright (C) 1999 David A. Hinds.  All Rights Reserved. * * Alternatively, the contents of this file may be used under the * terms of the GNU General Public License version 2 (the "GPL"), in which * case the provisions of the GPL are applicable instead of the * above.  If you wish to allow the use of your version of this file * only under the terms of the GPL and not to allow others to use * your version of this file under the MPL, indicate your decision by * deleting the provisions above and replace them with the notice and * other provisions required by the GPL.  If you do not delete the * provisions above, a recipient may use your version of this file * under either the MPL or the GPL. * bulkmem.h 1.3 1995/05/27 04:49:49 */#ifndef _LINUX_BULKMEM_H#define _LINUX_BULKMEM_H/* For GetFirstRegion and GetNextRegion */typedef struct region_info_t {    u_int		Attributes;    u_int		CardOffset;    u_int		RegionSize;    u_int		AccessSpeed;    u_int		BlockSize;    u_int		PartMultiple;    u_char		JedecMfr, JedecInfo;    memory_handle_t	next;} region_info_t;#define REGION_TYPE		0x0001#define REGION_TYPE_CM		0x0000#define REGION_TYPE_AM		0x0001#define REGION_PREFETCH		0x0008#define REGION_CACHEABLE	0x0010#define REGION_BAR_MASK		0xe000#define REGION_BAR_SHIFT	13/* For OpenMemory */typedef struct open_mem_t {    u_int		Attributes;    u_int		Offset;} open_mem_t;/* Attributes for OpenMemory */#define MEMORY_TYPE		0x0001#define MEMORY_TYPE_CM		0x0000#define MEMORY_TYPE_AM		0x0001#define MEMORY_EXCLUSIVE	0x0002#define MEMORY_PREFETCH		0x0008#define MEMORY_CACHEABLE	0x0010#define MEMORY_BAR_MASK		0xe000#define MEMORY_BAR_SHIFT	13typedef struct eraseq_entry_t {    memory_handle_t	Handle;    u_char		State;    u_int		Size;    u_int		Offset;    void		*Optional;} eraseq_entry_t;typedef struct eraseq_hdr_t {    int			QueueEntryCnt;    eraseq_entry_t	*QueueEntryArray;} eraseq_hdr_t;#define ERASE_QUEUED		0x00#define ERASE_IN_PROGRESS(n)	(((n) > 0) && ((n) < 0x80))#define ERASE_IDLE		0xff#define ERASE_PASSED		0xe0#define ERASE_FAILED		0xe1#define ERASE_MISSING		0x80#define ERASE_MEDIA_WRPROT	0x84#define ERASE_NOT_ERASABLE	0x85#define ERASE_BAD_OFFSET	0xc1#define ERASE_BAD_TECH		0xc2#define ERASE_BAD_SOCKET	0xc3#define ERASE_BAD_VCC		0xc4#define ERASE_BAD_VPP		0xc5#define ERASE_BAD_SIZE		0xc6/* For CopyMemory */typedef struct copy_op_t {    u_int		Attributes;    u_int		SourceOffset;    u_int		DestOffset;    u_int		Count;} copy_op_t;/* For ReadMemory and WriteMemory */typedef struct mem_op_t {    u_int	Attributes;    u_int	Offset;    u_int	Count;} mem_op_t;#define MEM_OP_BUFFER		0x01#define MEM_OP_BUFFER_USER	0x00#define MEM_OP_BUFFER_KERNEL	0x01#define MEM_OP_DISABLE_ERASE	0x02#define MEM_OP_VERIFY		0x04/* For RegisterMTD */typedef struct mtd_reg_t {    u_int	Attributes;    u_int	Offset;    u_long	MediaID;} mtd_reg_t;/* *  Definitions for MTD requests */typedef struct mtd_request_t {    u_int	SrcCardOffset;    u_int	DestCardOffset;    u_int	TransferLength;    u_int	Function;    u_long	MediaID;    u_int	Status;    u_int	Timeout;} mtd_request_t;/* Fields in MTD Function */#define MTD_REQ_ACTION		0x003#define MTD_REQ_ERASE		0x000#define MTD_REQ_READ		0x001#define MTD_REQ_WRITE		0x002#define MTD_REQ_COPY		0x003#define MTD_REQ_NOERASE		0x004#define MTD_REQ_VERIFY		0x008#define MTD_REQ_READY		0x010#define MTD_REQ_TIMEOUT		0x020#define MTD_REQ_LAST		0x040#define MTD_REQ_FIRST		0x080#define MTD_REQ_KERNEL		0x100/* Status codes */#define MTD_WAITREQ	0x00#define MTD_WAITTIMER	0x01#define MTD_WAITRDY	0x02#define MTD_WAITPOWER	0x03/* *  Definitions for MTD helper functions *//* For MTDModifyWindow */typedef struct mtd_mod_win_t {    u_int	Attributes;    u_int	AccessSpeed;    u_int	CardOffset;} mtd_mod_win_t;/* For MTDSetVpp */typedef struct mtd_vpp_req_t {    u_char	Vpp1, Vpp2;} mtd_vpp_req_t;/* For MTDRDYMask */typedef struct mtd_rdy_req_t {    u_int	Mask;} mtd_rdy_req_t;enum mtd_helper {    MTDRequestWindow, MTDModifyWindow, MTDReleaseWindow,    MTDSetVpp, MTDRDYMask};#ifdef IN_CARD_SERVICESextern int MTDHelperEntry(int func, void *a1, void *a2);#elseextern int MTDHelperEntry(int func, ...);#endifint pcmcia_get_first_region(client_handle_t handle, region_info_t *rgn);int pcmcia_get_next_region(client_handle_t handle, region_info_t *rgn);int pcmcia_register_mtd(client_handle_t handle, mtd_reg_t *reg);int pcmcia_register_erase_queue(client_handle_t *handle, eraseq_hdr_t *header, eraseq_handle_t *e);int pcmcia_deregister_erase_queue(eraseq_handle_t eraseq);int pcmcia_check_erase_queue(eraseq_handle_t eraseq);int pcmcia_open_memory(client_handle_t *handle, open_mem_t *open, memory_handle_t *m);int pcmcia_close_memory(memory_handle_t handle);int pcmcia_read_memory(memory_handle_t handle, mem_op_t *req, caddr_t buf);int pcmcia_write_memory(memory_handle_t handle, mem_op_t *req, caddr_t buf);int pcmcia_copy_memory(memory_handle_t handle, copy_op_t *req);#endif /* _LINUX_BULKMEM_H */

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -