📄 msgeng.c
字号:
"5 sec",
"10 sec", //355
"CNG Cycles",
"1.5 cycle",
"2.0 cycle",
"Tone Sound Mon",
"No Monitoring", //360
"Up to Phase B",
"All Transmission Phases",
"Stop/Clear key",
"Not Functional",
"Functional", //365
"TX Settings",
"Redial Interval",
"3.5 sec",
"Redialings",
"Activity Report", //370
"Overseas CM Set",
"Overseas CM",
"Ignores DIS Ones",
"Mini Time Length",
"100 ms", //375
"200 ms",
"300 ms",
"400 ms",
"Tone Signal Set",
"Tone Signal Trans Time Length", //380
"150 ms",
"10.5sec",
"14.0sec",
"Mini Pause in TD",
"Attenuator PRB", //385
"DTMF Level",
"-10dBu",
"-8dBu",
"-6dBu",
"DTMF Delta", //390
"2dBu",
"3dBu",
"1dial Tone Dete",
"Wait Time",
"4 sec", //395
"7 sec",
"Time-out Length",
"20 sec",
"BT Detection",
"BT Setting", //400
"BT Frequency",
"BT Level",
"-35dB",
"-36dB",
"-37dB", //405
"-38dB",
"-39dB",
"BT Cadence",
"0.10",
"0.15", //410
"0.20",
"0.25",
"0.30",
"0.35",
"0.40", //415
"0.45",
"0.50",
"0.75",
"300-550Hz",
"300-650Hz", //420
"325-525Hz",
"340-550Hz",
"350-500Hz",
"350-550Hz",
"375-475Hz", //425
"380-520Hz",
"Comm Settings",
"RTN Rate",
"10%",
"15%", //430
"V34 Modem",
"V17 Modem",
"Permitted",
"Prohibited",
"V34 Settings", //435
"Equalizer",
"4 points",
"16 points",
"Redialing",
"Disabled", //440
"Not Disabled",
"First TX Speed",
"2.4Kbps",
"7.2Kbps",
"16.8Kbps", //445
"19.2Kbps",
"21.6Kbps",
"24Kbps",
"26.4Kbps",
"31.2Kbps", //450
"Symbol Rate",
"Not Used",
"3429 symbols/sec",
"3200 symbols/sec",
"3000 symbols/sec", //455
"2800 symbols/sec",
"2400 symbols/sec",
//fax maintenance end
/* max:16 UI_FAXMSG_SCANNING_PAGE *///start of Mytecs string table
"Scanning Page",
/* max:8 UI_FAXMSG_SCANNING_PAGE_JOBNUM */
"Job#",
/* max:16 UI_FAXMSG_SCAN_NEXT_PAGE */
"Next Page?", //460
/* max:16 UI_FAXMSG_SCAN_NEXT_PAGE_YN */
"1.Yes 2.No",
/* max:16 UI_FAXMSG_SCAN_PLACE_PAGE1 */
"Place Next Page",
/* max:16 UI_FAXMSG_SCAN_PLACE_PAGE2 */
"Then Press Set",
/* max:16 UI_FAXMSG_DIALING */
"Dialing",
/* max:16 UI_FAXMSG_DIALING_CLEAREXIT */
"1.Clear 2.Exit", //465
/* max:16 UI_FAXMSG_AWAITING_REDIAL */
"Awaiting Redial",
/* max:16 UI_FAXMSG_TRANSMITTING */
"Transmitting",
/* max:16 UI_FAXMSG_RECEIVING */
"Receiving",
/* max:16 UI_FAXMSG_PRINTING */
"Printing",
/* max:16 UI_FAXMSG_TAD_Answering */
"TAD Answering", //470
/* max:16 UI_FAXMSG_TELFAX_Answering */
"Answering",
/* max:16 UI_FAXMSG_TELFAX_Ringing */
"Incomming Call",
/* max:16 UI_FAXMSG_ExtTel_Hook */
"Telephone",
/* max:16 UI_FAXMSG_Hook */
"Off Hook",
/* max:16 UI_FAXMSG_FaxComSelect */
"1.TX 3.RX", //475
/* max:16 UI_FAXMSG_ManualTxConfirm */
"TX:Press Start",
/* max:16 UI_FAXMSG_ManualRxConfirm */
"RX:Press Start",
/* max:16 UI_FAXMSG_OffHookAlarm */
"On Hook Or Stop",
/* max:16 UI_FAXMSG_CANCEL */
"Cancel", // This is not in specification.
/* max:16 UI_FAXMSG_CANCEL_FAX_JOB */
"Cancel Fax Job", // This is not in specification. //480
/* max:16 UI_FAXMSG_FaxComSelect2 */
"1.TX 2.RX", // This is not in specification.
/* max:16 UI_FAXERR_TX_COMM_ERROR */
"TX Comm. Error",
/* max:16 UI_FAXERR_RX_COMM_ERROR */
"RX Comm. Error",
/* max:16 UI_FAXERR_CONNECTION_FAIL */
"Connection Fail",
/* max:16 UI_FAXERR_DISCONNECTED */
"Disconnected", //485
/* max:16 UI_FAXERR_NO_RESPONSE */
"No Response",
/* max:16 UI_FAXERR_BUSY */
"Busy",
/* max:16 UI_FAXERR_DIAL_FAIL */
"Dial Fail",
/* max:16 UI_FAXERR_MEMORY_FULL */
"Memory Full",
/* max:16 UI_FAXERR_PAPER_JAM */
"Paper Jam", //490
/* max:16 UI_FAXERR_COVER_OPEN */
"Cover Open",
/* max:16 UI_FAXERR_ADF_JAM */
"ADF Jam",
/* max:16 UI_FAXERR_ADF_OPEN */
"ADF Open",
/* max:16 UI_FAXERR_COMM_ERROR */
"Comm.Error",
/* max:16 UI_FAXERR_SET_CORRECTPAPER */
"Set CorrectPaper", //495
/* max:16 UI_FAXERR_DIAL_FAILED */
"Dial Failed",
/* max:16 UI_FAXERR_FAX_BOARD_HW_ERR */
"FAX board HW Err",
/* max:16 UI_FAXERR_1_TX_2_CANCEL */
"1.TX 2.Cancel", // This is not in specification.
/* max:16 UI_FAXERR_FAX_JOBS_FULL */
"Fax Jobs Full", // This is not in specification.
/* max:108 REPFAX_ACTIVITY_REPORT */
"ACTIVITY REPORT",//500
/* max:108 REPFAX_MESSAGE_CONFIRMATION_REPORT */
"MESSAGE CONFIRMATION REPORT",
/* max:108 REPFAX_POWER_FAILURE_REPORT */
"POWER FAILURE REPORT",
/* max:108 REPFAX_SCHEDULE_JOBS_LIST */
"SCHEDULE JOBS LIST",
/* max:108 REPFAX_T30_DUMP_LIST */
"T30 DUMP LIST",
/* max:108 REPFAX_PHONE_BOOK_LIST */
"PHONE BOOK", //505
/* max:6 REPFAX_Page */
"Page",
/* max:8 REPFAX_Date */
"Date",
/* max:8 REPFAX_Name */
"Name",
/* max:8 REPFAX_ID */
"ID",
/* max:8 REPFAX_FW_Ver */
"FW Ver", //510
/* max:3 REPFAX_JOB_NUMBER */
"#",
/* max:18 REPFAX_Date_Time */
"Date/Time",
/* max:8 REPFAX_TX_RX */
"TX/RX",
/* max:8 REPFAX_Duration */
"Duration",
/* max:23 REPFAX_Name_Number */
"Name/Number", //515
/* max:5 REPFAX_Pages */
"Pages",
/* max:11 REPFAX_Results */
"Results",
/* max:9 REPFAX_Type */
"Type",
/* max:8 REPFAX_Sent */
"Sent",
/* max:8 REPFAX_Received */
"Received", //520
/* max:11 REPFAX_OK */
"OK",
/* max:4 REPFAX_Err */
"Err",
/* max:11 REPFAX_STOP */
"STOP",
/* max:10 REPFAX_Memory_TX */
"Memory TX",
/* max:10 REPFAX_Delay_TX */
"Delay TX", //525
/* max:10 REPFAX_Broadcast */
"Broadcast",
/* max:10 REPFAX_Redial */
"Redial",
/* max:50 REPFAX_Speed_Dial_List_IN_PHONE_BOOK_LIST */
"Speed Dial List",
/* max:50 REPFAX_Group_Dial_List_IN_PHONE_BOOK_LIST */
"Group Dial List",
/* max:6 REPFAX_No_dot_IN_PHONE_BOOK_LIST */
"No.", //530
/* max:50 REPFAX_Number_IN_PHONE_BOOK_LIST */
"Number",
/* max:50 REPFAX_Fax_Number_IN_PHONE_BOOK_LIST */
"Fax Number",
/* max:10 REPFAX_Loc_No_IN_PHONE_BOOK_LIST */
"Loc.No.",
/* max:6 REPFAX_Page_forHeaderFooter */
"Page",
"PC Faxing", //535
"Fax Complete",
"Memory Received",
/* END OF Mytecs string TABLE */
"Time Locked",
"No Job",
"is Cancelled", //540
"No Redial No.",
"Fax Factory",
"Dial Test",
"Off-Hook Test",
"CED Test", //545
"DTMF Test",
"Modem Test",
"On Hook",
"Off Hook",
"Tone[0]", //550
"Tone[1]",
"Tone[2]",
"Tone[3]",
"Tone[4]",
"Tone[5]", //555
"Tone[6]",
"Tone[7]",
"Tone[8]",
"Tone[9]",
"Tone[*]", //560
"Tone[#]",
"Tone Stop",
"[V34] 33600bps",
"[V34] 28800bps",
"[V17] 14400bps", //565
"[V17] 12000bps",
"[V17] 9600bps",
"[V17] 7200bps",
"[V29] 9600bps",
"[V29] 7200bps", //570
"[V27] 4800bps",
"[V27] 2400bps",
"[V21] 300bps",
"Signal Stop",
"All Black", //575
"All White",
"5% Test Page",
"20% Gray",
"25% Gray",
"Fax Number", //580
"Options",
"Item",
"Status",
"Firmware/Engine Version",
"Total Page Counts", //585
"CRUM Vendor/Serial",
"Memory Size",
"Mbyte",
"DRAM Error",
"Call Service", //590
"Copying Pg",
"CNG Test",
"ANSam",
"Ring Tone Test",
"Canceling", //595
"Please Wait",
"Power Saving",
"Return",
"DRPD",
"TX Contrast", //600
"No Print Data",
"Pls Load data!",
"Test Result",
"KeyBoard Test",
"Test", //605
"Fax Board",
"Testing",
"Fax Test Result",
"NG",
"Input", //610
"Run Times",
"Back or Select",
"Flatbed Scan",
"Moving",
"Checksum", //615
"Verify",
"Flash",
"Sum",
"Test Page",
"Wait", //620
"Auto Feeding",
"USB Comm.",
"Toner New",
"Too Much Groups",
"End DRPD", //625
"Waiting Ring",
"DRPD Ring",
"Colombia",
"Puerto Rico",
"Trinidad", //630
"Austria",
"Belgium",
"Denmark",
"Greece",
"Iceland", //635
"Luxembourg",
"Switzerland French",
"Switzerland German",
"Switzerland Italian",
"Argentina", //640
"Brazil",
"Chile",
"South Africa",
"Australia",
"New Zealand", //645
"China",
"Hong Kong",
"Malaysia",
"Singapore",
"Korea", //650
"Taiwan",
"India",
"Israel",
"Japan",
"Algeria", //655
"Egypt",
"Jordan",
"Kuwait",
"Lebanon",
"Oman", //660
"Saudi Arabia",
"Tunisia",
"UAE",
"Yemen",
"Already Include", //665
"Save",
"Pls Check The",
"Configuration!",
"Put Papers Back",
"Press Select", //670
"No Toner found",
"Drum Cartridge",
"Expired",
"Reset DC Cnt.",
/* END OF TABLE */
};
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -