gethardsoftinfo.h

读取硬盘id的源程序（vc++）,很好用

#include "stdafx.h"
#include <stdlib.h>
#include <stdio.h>
#include <string.h>
#include <windows.h>
#include <String.h>


#define  TITLE   "DiskId32"


   //  Required to ensure correct PhysicalDrive IOCTL structure setup
#pragma pack(1)


   //  Max number of drives assuming primary/secondary, master/slave topology
#define  MAX_IDE_DRIVES  4
#define  IDENTIFY_BUFFER_SIZE  512
//
#define  m_cVxDFunctionIdesDInfo  1
#define  SENDIDLENGTH  sizeof (SENDCMDOUTPARAMS) + IDENTIFY_BUFFER_SIZE


   //  IOCTL commands
#define  DFP_GET_VERSION          0x00074080
#define  DFP_SEND_DRIVE_COMMAND   0x0007c084
#define  DFP_RECEIVE_DRIVE_DATA   0x0007c088

#define  FILE_DEVICE_SCSI              0x0000001b
#define  IOCTL_SCSI_MINIPORT_IDENTIFY  ((FILE_DEVICE_SCSI << 16) + 0x0501)
#define  IOCTL_SCSI_MINIPORT 0x0004D008  //  see NTDDSCSI.H for definition



   //  GETVERSIONOUTPARAMS contains the data returned from the 
   //  Get Driver Version function.
typedef struct _GETVERSIONOUTPARAMS
{
   BYTE bVersion;      // Binary driver version.
   BYTE bRevision;     // Binary driver revision.
   BYTE bReserved;     // Not used.
   BYTE bIDEDeviceMap; // Bit map of IDE devices.
   DWORD fCapabilities; // Bit mask of driver capabilities.
   DWORD dwReserved[4]; // For future use.
} GETVERSIONOUTPARAMS, *PGETVERSIONOUTPARAMS, *LPGETVERSIONOUTPARAMS;


   //  Bits returned in the fCapabilities member of GETVERSIONOUTPARAMS 
#define  CAP_IDE_ID_FUNCTION             1  // ATA ID command supported
#define  CAP_IDE_ATAPI_ID                2  // ATAPI ID command supported
#define  CAP_IDE_EXECUTE_SMART_FUNCTION  4  // SMART commannds supported


   //  IDE registers
typedef struct _IDEREGS
{
   BYTE bFeaturesReg;       // Used for specifying SMART "commands".
   BYTE bSectorCountReg;    // IDE sector count register
   BYTE bSectorNumberReg;   // IDE sector number register
   BYTE bCylLowReg;         // IDE low order cylinder value
   BYTE bCylHighReg;        // IDE high order cylinder value
   BYTE bDriveHeadReg;      // IDE drive/head register
   BYTE bCommandReg;        // Actual IDE command.
   BYTE bReserved;          // reserved for future use.  Must be zero.
} IDEREGS, *PIDEREGS, *LPIDEREGS;


   //  SENDCMDINPARAMS contains the input parameters for the 
   //  Send Command to Drive function.
typedef struct _SENDCMDINPARAMS
{
   DWORD     cBufferSize;   //  Buffer size in bytes
   IDEREGS   irDriveRegs;   //  Structure with drive register values.
   BYTE bDriveNumber;       //  Physical drive number to send 
                            //  command to (0,1,2,3).
   BYTE bReserved[3];       //  Reserved for future expansion.
   DWORD     dwReserved[4]; //  For future use.
   BYTE      bBuffer[1];    //  Input buffer.
} SENDCMDINPARAMS, *PSENDCMDINPARAMS, *LPSENDCMDINPARAMS;


   //  Valid values for the bCommandReg member of IDEREGS.
#define  IDE_ATAPI_IDENTIFY  0xA1  //  Returns ID sector for ATAPI.
#define  IDE_ATA_IDENTIFY    0xEC  //  Returns ID sector for ATA.


   // Status returned from driver
typedef struct _DRIVERSTATUS
{
   BYTE  bDriverError;  //  Error code from driver, or 0 if no error.
   BYTE  bIDEStatus;    //  Contents of IDE Error register.
                        //  Only valid when bDriverError is SMART_IDE_ERROR.
   BYTE  bReserved[2];  //  Reserved for future expansion.
   DWORD  dwReserved[2];  //  Reserved for future expansion.
} DRIVERSTATUS, *PDRIVERSTATUS, *LPDRIVERSTATUS;


   // Structure returned by PhysicalDrive IOCTL for several commands
typedef struct _SENDCMDOUTPARAMS
{
   DWORD         cBufferSize;   //  Size of bBuffer in bytes
   DRIVERSTATUS  DriverStatus;  //  Driver status structure.
   BYTE          bBuffer[1];    //  Buffer of arbitrary length in which to store the data read from the                                                       // drive.
} SENDCMDOUTPARAMS, *PSENDCMDOUTPARAMS, *LPSENDCMDOUTPARAMS;


   // The following struct defines the interesting part of the IDENTIFY
   // buffer:
typedef struct _IDSECTOR
{
   USHORT  wGenConfig;
   USHORT  wNumCyls;
   USHORT  wReserved;
   USHORT  wNumHeads;
   USHORT  wBytesPerTrack;
   USHORT  wBytesPerSector;
   USHORT  wSectorsPerTrack;
   USHORT  wVendorUnique[3];
   CHAR    sSerialNumber[20];
   USHORT  wBufferType;
   USHORT  wBufferSize;
   USHORT  wECCSize;
   CHAR    sFirmwareRev[8];
   CHAR    sModelNumber[40];
   USHORT  wMoreVendorUnique;
   USHORT  wDoubleWordIO;
   USHORT  wCapabilities;
   USHORT  wReserved1;
   USHORT  wPIOTiming;
   USHORT  wDMATiming;
   USHORT  wBS;
   USHORT  wNumCurrentCyls;
   USHORT  wNumCurrentHeads;
   USHORT  wNumCurrentSectorsPerTrack;
   ULONG   ulCurrentSectorCapacity;
   USHORT  wMultSectorStuff;
   ULONG   ulTotalAddressableSectors;
   USHORT  wSingleWordDMA;
   USHORT  wMultiWordDMA;
   BYTE    bReserved[128];
} IDSECTOR, *PIDSECTOR;


typedef struct _SRB_IO_CONTROL
{
   ULONG HeaderLength;
   UCHAR Signature[8];
   ULONG Timeout;
   ULONG ControlCode;
   ULONG ReturnCode;
   ULONG Length;
} SRB_IO_CONTROL, *PSRB_IO_CONTROL;

//  ---------------------------------------------------

   // (* Output Bbuffer for the VxD (rt_IdeDinfo record) *)
typedef struct _rt_IdeDInfo_
{
    BYTE IDEExists[4];
    BYTE DiskExists[8];
    WORD DisksRawInfo[8*256];
} rt_IdeDInfo, *pt_IdeDInfo;


   // (* IdeDinfo "data fields" *)
typedef struct _rt_DiskInfo_
{
   BOOL DiskExists;
   BOOL ATAdevice;
   BOOL RemovableDevice;
   WORD TotLogCyl;
   WORD TotLogHeads;
   WORD TotLogSPT;
   char SerialNumber[20];
   char FirmwareRevision[8];
   char ModelNumber[40];
   WORD CurLogCyl;
   WORD CurLogHeads;
   WORD CurLogSPT;
} rt_DiskInfo;

class CGetMachineInfo
{

// Construction
public:
	//Creat Function
CGetMachineInfo(void);

protected:
	//conversion to char string
	char *ConvertToString (DWORD diskdata [256], int firstIndex, int lastIndex);

	BOOL DoIDENTIFY (HANDLE hPhysicalDriveIOCTL, PSENDCMDINPARAMS pSCIP,
                 PSENDCMDOUTPARAMS pSCOP, BYTE bIDCmd, BYTE bDriveNum,
                 PDWORD lpcbBytesReturned);
	int ReadPhysicalDriveInNT (void);
	int ReadDrivePortsInWin9X (void);
	int ReadIdeDriveAsScsiDriveInNT (void);
	BOOL ReturnInfo(int drive, DWORD diskdata [256]);
public:
	char HardDriveSerialNumber [1024];
	CString str_DN_Modol;
	CString str_DN_Serial;
	CString str_DN_ControllerRevision;
	CString str_HardDeskSize;
	CString str_HardDeskBufferSize;
	CString str_HardDeskType;
	CString str_HardDesk_Form;
    CString str_Controller;
};