svga.fit.qmsg

在开发板上实现svga条形信号发生器的源代码

{ "Info" "IFSAC_FSAC_FINISH_LUT_IO_RAM_PACKING" "" "Info: Finished moving registers into I/O cells, LUTs, and RAM blocks" {  } {  } 0 0 "Finished moving registers into I/O cells, LUTs, and RAM blocks" 0 0}
{ "Info" "IFSAC_FSAC_REGISTER_PACKING_FINISH_REGPACKING_INFO" "00:00:00 " "Info: Finished register packing: elapsed time is 00:00:00" {  } {  } 0 0 "Finished register packing: elapsed time is %1!s!" 0 0}
{ "Info" "IFSAC_FSAC_IO_BANK_PIN_GROUP_STATISTICS" "I/O pins that need to be placed that use the same VCCIO and VREF, before I/O pin placement " "Info: Statistics of I/O pins that need to be placed that use the same VCCIO and VREF, before I/O pin placement" { { "Info" "IFSAC_FSAC_SINGLE_IOC_GROUP_STATISTICS" "1 unused 3.30 0 1 0 " "Info: Number of I/O pins in group: 1 (unused VREF, 3.30 VCCIO, 0 input, 1 output, 0 bidirectional)" { { "Info" "IFSAC_FSAC_IO_STDS_IN_IOC_GROUP" "LVTTL. " "Info: I/O standards used: LVTTL." {  } {  } 0 0 "I/O standards used: %1!s!" 0 0}  } {  } 0 0 "Number of I/O pins in group: %1!d! (%2!s! VREF, %3!s! VCCIO, %4!d! input, %5!d! output, %6!d! bidirectional)" 0 0}  } {  } 0 0 "Statistics of %1!s!" 0 0}
{ "Info" "IFSAC_FSAC_IO_STATS_BEFORE_AFTER_PLACEMENT" "before " "Info: I/O bank details before I/O pin placement" { { "Info" "IFSAC_FSAC_IO_BANK_PIN_GROUP_STATISTICS" "I/O banks " "Info: Statistics of I/O banks" { { "Info" "IFSAC_FSAC_SINGLE_IO_BANK_STATISTICS" "1 does not use 3.30V 6 38 " "Info: I/O bank number 1 does not use VREF pins and has 3.30V VCCIO pins. 6 total pin(s) used --  38 pins available" {  } {  } 0 0 "I/O bank number %1!d! %2!s! VREF pins and has %3!s! VCCIO pins. %4!d! total pin(s) used --  %5!d! pins available" 0 0} { "Info" "IFSAC_FSAC_SINGLE_IO_BANK_STATISTICS" "2 does not use 3.30V 2 46 " "Info: I/O bank number 2 does not use VREF pins and has 3.30V VCCIO pins. 2 total pin(s) used --  46 pins available" {  } {  } 0 0 "I/O bank number %1!d! %2!s! VREF pins and has %3!s! VCCIO pins. %4!d! total pin(s) used --  %5!d! pins available" 0 0} { "Info" "IFSAC_FSAC_SINGLE_IO_BANK_STATISTICS" "3 does not use unused 1 44 " "Info: I/O bank number 3 does not use VREF pins and has unused VCCIO pins. 1 total pin(s) used --  44 pins available" {  } {  } 0 0 "I/O bank number %1!d! %2!s! VREF pins and has %3!s! VCCIO pins. %4!d! total pin(s) used --  %5!d! pins available" 0 0} { "Info" "IFSAC_FSAC_SINGLE_IO_BANK_STATISTICS" "4 does not use unused 1 47 " "Info: I/O bank number 4 does not use VREF pins and has unused VCCIO pins. 1 total pin(s) used --  47 pins available" {  } {  } 0 0 "I/O bank number %1!d! %2!s! VREF pins and has %3!s! VCCIO pins. %4!d! total pin(s) used --  %5!d! pins available" 0 0}  } {  } 0 0 "Statistics of %1!s!" 0 0}  } {  } 0 0 "I/O bank details %1!s! I/O pin placement" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_PREP_START" "" "Info: Fitter placement preparation operations beginning" {  } {  } 0 0 "Fitter placement preparation operations beginning" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_PREP_END" "00:00:00 " "Info: Fitter placement preparation operations ending: elapsed time is 00:00:00" {  } {  } 0 0 "Fitter placement preparation operations ending: elapsed time is %1!s!" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_START" "" "Info: Fitter placement operations beginning" {  } {  } 0 0 "Fitter placement operations beginning" 0 0}
{ "Info" "IFITAPI_FITAPI_INFO_VPR_PLACEMENT_FINISH" "" "Info: Fitter placement was successful" {  } {  } 0 0 "Fitter placement was successful" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_END" "00:00:00 " "Info: Fitter placement operations ending: elapsed time is 00:00:00" {  } {  } 0 0 "Fitter placement operations ending: elapsed time is %1!s!" 0 0}
{ "Info" "ITDB_FULL_ESTIMATED_DATA_PATH_RESULT" "2.903 ns register register " "Info: Estimated most critical path is register to register delay of 2.903 ns" { { "Info" "ITDB_NODE_DELAY" "IC(0.000 ns) + CELL(0.000 ns) 0.000 ns vcnt\[7\] 1 REG LAB_X29_Y16 11 " "Info: 1: + IC(0.000 ns) + CELL(0.000 ns) = 0.000 ns; Loc. = LAB_X29_Y16; Fanout = 11; REG Node = 'vcnt\[7\]'" {  } { { "d:/altera/quartus60/win/TimingClosureFloorplan.fld" "" { Floorplan "d:/altera/quartus60/win/TimingClosureFloorplan.fld" "" "" { vcnt[7] } "NODE_NAME" } } { "SVGA.v" "" { Text "F:/PROJECT/Software/SVGA/SVGA.v" 116 -1 0 } }  } 0 0 "%4!d!: + %1!s! = %2!s!; Loc. = %6!s!; Fanout = %7!d!; %5!s! Node = '%3!s!'" 0 0} { "Info" "ITDB_NODE_DELAY" "IC(1.297 ns) + CELL(0.114 ns) 1.411 ns LessThan8~226 2 COMB LAB_X29_Y17 4 " "Info: 2: + IC(1.297 ns) + CELL(0.114 ns) = 1.411 ns; Loc. = LAB_X29_Y17; Fanout = 4; COMB Node = 'LessThan8~226'" {  } { { "d:/altera/quartus60/win/TimingClosureFloorplan.fld" "" { Floorplan "d:/altera/quartus60/win/TimingClosureFloorplan.fld" "" "1.411 ns" { vcnt[7] LessThan8~226 } "NODE_NAME" } } { "SVGA.v" "" { Text "F:/PROJECT/Software/SVGA/SVGA.v" 148 -1 0 } }  } 0 0 "%4!d!: + %1!s! = %2!s!; Loc. = %6!s!; Fanout = %7!d!; %5!s! Node = '%3!s!'" 0 0} { "Info" "ITDB_NODE_DELAY" "IC(0.539 ns) + CELL(0.114 ns) 2.064 ns always4~65 3 COMB LAB_X29_Y17 1 " "Info: 3: + IC(0.539 ns) + CELL(0.114 ns) = 2.064 ns; Loc. = LAB_X29_Y17; Fanout = 1; COMB Node = 'always4~65'" {  } { { "d:/altera/quartus60/win/TimingClosureFloorplan.fld" "" { Floorplan "d:/altera/quartus60/win/TimingClosureFloorplan.fld" "" "0.653 ns" { LessThan8~226 always4~65 } "NODE_NAME" } }  } 0 0 "%4!d!: + %1!s! = %2!s!; Loc. = %6!s!; Fanout = %7!d!; %5!s! Node = '%3!s!'" 0 0} { "Info" "ITDB_NODE_DELAY" "IC(0.361 ns) + CELL(0.478 ns) 2.903 ns enable 4 REG LAB_X29_Y17 4 " "Info: 4: + IC(0.361 ns) + CELL(0.478 ns) = 2.903 ns; Loc. = LAB_X29_Y17; Fanout = 4; REG Node = 'enable'" {  } { { "d:/altera/quartus60/win/TimingClosureFloorplan.fld" "" { Floorplan "d:/altera/quartus60/win/TimingClosureFloorplan.fld" "" "0.839 ns" { always4~65 enable } "NODE_NAME" } } { "SVGA.v" "" { Text "F:/PROJECT/Software/SVGA/SVGA.v" 134 -1 0 } }  } 0 0 "%4!d!: + %1!s! = %2!s!; Loc. = %6!s!; Fanout = %7!d!; %5!s! Node = '%3!s!'" 0 0} { "Info" "ITDB_TOTAL_CELL_DELAY" "0.706 ns ( 24.32 % ) " "Info: Total cell delay = 0.706 ns ( 24.32 % )" {  } {  } 0 0 "Total cell delay = %1!s! %2!s!" 0 0} { "Info" "ITDB_TOTAL_IC_DELAY" "2.197 ns ( 75.68 % ) " "Info: Total interconnect delay = 2.197 ns ( 75.68 % )" {  } {  } 0 0 "Total interconnect delay = %1!s! %2!s!" 0 0}  } { { "d:/altera/quartus60/win/TimingClosureFloorplan.fld" "" { Floorplan "d:/altera/quartus60/win/TimingClosureFloorplan.fld" "" "2.903 ns" { vcnt[7] LessThan8~226 always4~65 enable } "NODE_NAME" } }  } 0 0 "Estimated most critical path is %2!s! to %3!s! delay of %1!s!" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_ROUTING_START" "" "Info: Fitter routing operations beginning" {  } {  } 0 0 "Fitter routing operations beginning" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_PERCENT_ROUTING_RESOURCE_USAGE" "0 1 " "Info: Average interconnect usage is 0% of the available device resources. Peak interconnect usage is 1%" { { "Info" "IFITAPI_FITAPI_VPR_PEAK_ROUTING_REGION" "x24_y11 x35_y21 " "Info: The peak interconnect region extends from location x24_y11 to location x35_y21" {  } {  } 0 0 "The peak interconnect region extends from location %1!s! to location %2!s!" 0 0}  } {  } 0 0 "Average interconnect usage is %1!d!%% of the available device resources. Peak interconnect usage is %2!d!%%" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_ROUTING_END" "00:00:00 " "Info: Fitter routing operations ending: elapsed time is 00:00:00" {  } {  } 0 0 "Fitter routing operations ending: elapsed time is %1!s!" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED" "" "Info: The Fitter performed an Auto Fit compilation.  Optimizations were skipped to reduce compilation time." { { "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED_FOR_ROUTABILITY" "" "Info: Optimizations that may affect the design's routability were skipped" {  } {  } 0 0 "Optimizations that may affect the design's routability were skipped" 0 0} { "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED_FOR_TIMING" "" "Info: Optimizations that may affect the design's timing were skipped" {  } {  } 0 0 "Optimizations that may affect the design's timing were skipped" 0 0}  } {  } 0 0 "The Fitter performed an Auto Fit compilation.  Optimizations were skipped to reduce compilation time." 0 0}
{ "Info" "IFYGR_FYGR_OPINFO_COMPLETED_OP" "Fixed Delay Chain Operation " "Info: Completed Fixed Delay Chain Operation" {  } {  } 0 0 "Completed %1!s!" 0 0}
{ "Info" "IDAT_DAT_STARTED" "" "Info: Started post-fitting delay annotation" {  } {  } 0 0 "Started post-fitting delay annotation" 0 0}
{ "Info" "IDAT_DAT_COMPLETED" "" "Info: Delay annotation completed successfully" {  } {  } 0 0 "Delay annotation completed successfully" 0 0}
{ "Info" "IFYGR_FYGR_OPINFO_COMPLETED_OP" "Auto Delay Chain Operation " "Info: Completed Auto Delay Chain Operation" {  } {  } 0 0 "Completed %1!s!" 0 0}
{ "Info" "IQEXE_ERROR_COUNT" "Fitter 0 s 0 s Quartus II " "Info: Quartus II Fitter was successful. 0 errors, 0 warnings" { { "Info" "IQEXE_END_BANNER_TIME" "Wed Jan 24 10:38:03 2007 " "Info: Processing ended: Wed Jan 24 10:38:03 2007" {  } {  } 0 0 "Processing ended: %1!s!" 0 0} { "Info" "IQEXE_ELAPSED_TIME" "00:00:04 " "Info: Elapsed time: 00:00:04" {  } {  } 0 0 "Elapsed time: %1!s!" 0 0}  } {  } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0}
{ "Info" "IRDB_WROTE_SUPPRESSED_MSGS" "F:/PROJECT/Software/SVGA/SVGA.fit.smsg " "Info: Generated suppressed messages file F:/PROJECT/Software/SVGA/SVGA.fit.smsg" {  } {  } 0 0 "Generated suppressed messages file %1!s!" 0 0}