vip_1400.c

WinCE 3.0 BSP, 包含Inter SA1110, Intel_815E, Advantech_PCM9574 等

/*-----------------------------------------------------------------------------
 * VIP_1400.C
 *
 * Version 2.0 - February 21, 2000.
 *
 * This file routines to control the SC1400 video input port (VIP) hardware.
 *
 * History:
 *    Versions 0.1 through 2.0 by Brian Falardeau.
 *
 * Copyright (c) 1999-2000 National Semiconductor.
 *-----------------------------------------------------------------------------
 */

/*-----------------------------------------------------------------------------
 * gfx_set_vip_enable
 *
 * This routine enables or disables the writes to memory from the video port.  
 *-----------------------------------------------------------------------------
 */
#if GFX_VIDEO_DYNAMIC
int sc1400_set_vip_enable(int enable)
#else
int gfx_set_vip_enable(int enable)
#endif
{
    unsigned long mcr, value;
    value = READ_VIP32(SC1400_VIP_CONTROL);

    if(enable)
    {
        /* CONFIGURE MCR FOR VIDEO INPUT MODE */

        mcr = IND(SC1400_CB_BASE_ADDR + SC1400_CB_MISC_CONFIG);
        mcr |= (SC1400_MCR_VPOUT_CK_SELECT | SC1400_MCR_VPOUT_CK_SOURCE);
        mcr &= ~SC1400_MCR_VPOUT_MODE;
        mcr |= SC1400_MCR_VPIN_CCIR656;
        mcr &= ~SC1400_MCR_GENLOCK_CONTINUE;
        OUTD(SC1400_CB_BASE_ADDR + SC1400_CB_MISC_CONFIG, mcr);

        /* ENABLE CAPTURE */
        /* Hardcode config values for now. */

        WRITE_VIP32(SC1400_VIP_CONFIG, 0x30012);
        value |= 0x103;
    }
    else
    {
        value &= ~(0x102);
    }

    WRITE_VIP32(SC1400_VIP_CONTROL, value);
    return(0);
}

/*-----------------------------------------------------------------------------
 * gfx_set_vip_base
 *
 * This routine sets the odd and even base address values for the VIP memory
 * buffer.
 *-----------------------------------------------------------------------------
 */
#if GFX_VIDEO_DYNAMIC
int sc1400_set_vip_base(unsigned long even, unsigned long odd)
#else
int gfx_set_vip_base(unsigned long even, unsigned long odd)
#endif
{   
    // TRUE OFFSET IS SPECIFIED, NEED TO SET BIT 23 FOR HARDWARE

    WRITE_VIP32(SC1400_VIP_EVEN_BASE, even | 0x00800000);
    WRITE_VIP32(SC1400_VIP_ODD_BASE, odd | 0x00800000);
    return(0);
}

/*-----------------------------------------------------------------------------
 * gfx_set_vip_pitch
 *
 * This routine sets the number of bytes between scanlines for the VIP data.
 *-----------------------------------------------------------------------------
 */
#if GFX_VIDEO_DYNAMIC
int sc1400_set_vip_pitch(unsigned long pitch)
#else
int gfx_set_vip_pitch(unsigned long pitch)
#endif
{
    WRITE_VIP32(SC1400_VIP_PITCH, pitch & 0x0000FFFC);
    return(0);
}

/*-----------------------------------------------------------------------------
 * gfx_set_vbi_enable
 *
 * This routine enables or disables the VBI data capture.
 *-----------------------------------------------------------------------------
 */
#if GFX_VIDEO_DYNAMIC
int sc1400_set_vbi_enable(int enable)
#else
int gfx_set_vbi_enable(int enable)
#endif
{
    unsigned long value;
    value = READ_VIP32(SC1400_VIP_CONTROL);
    if (enable) value |= SC1400_VIP_VBI_CAPTURE_EN;
    else value &= ~SC1400_VIP_VBI_CAPTURE_EN;
    WRITE_VIP32(SC1400_VIP_CONTROL, value);  
    return(0);
}

/*-----------------------------------------------------------------------------
 * gfx_set_vbi_base
 *
 * This routine sets the odd and even base address values for VBI capture.
 *-----------------------------------------------------------------------------
 */
#if GFX_VIDEO_DYNAMIC
int sc1400_set_vbi_base(unsigned long even, unsigned long odd)
#else
int gfx_set_vbi_base(unsigned long even, unsigned long odd)
#endif
{   
    // TRUE OFFSET IS SPECIFIED, NEED TO SET BIT 23 FOR HARDWARE

    WRITE_VIP32(SC1400_VBI_EVEN_BASE, even | 0x00800000);
    WRITE_VIP32(SC1400_VBI_ODD_BASE, odd | 0x00800000);
    return(0);
}

/*-----------------------------------------------------------------------------
 * gfx_set_vbi_pitch
 *
 * This routine sets the number of bytes between scanlines for VBI capture.
 *-----------------------------------------------------------------------------
 */
#if GFX_VIDEO_DYNAMIC
int sc1400_set_vbi_pitch(unsigned long pitch)
#else
int gfx_set_vbi_pitch(unsigned long pitch)
#endif
{
    WRITE_VIP32(SC1400_VBI_PITCH, pitch & 0x0000FFFC);
    return(0);
}

/*************************************************************/
/*  READ ROUTINES  |  INCLUDED FOR DIAGNOSTIC PURPOSES ONLY  */
/*************************************************************/

#if GFX_READ_ROUTINES

/*-----------------------------------------------------------------------------
 * gfx_get_vip_enable
 *-----------------------------------------------------------------------------
 */
#if GFX_VIDEO_DYNAMIC
int sc1400_get_vip_enable(void)
#else
int gfx_get_vip_enable(void)
#endif
{
    if (READ_VIP32(SC1400_VIP_CONTROL) & 0x00000100) return(1);
    return(0);
}

/*-----------------------------------------------------------------------------
 * gfx_get_vip_base
 *-----------------------------------------------------------------------------
 */
#if GFX_VIDEO_DYNAMIC
unsigned long sc1400_get_vip_base(int odd)
#else
unsigned long gfx_get_vip_base(int odd)
#endif
{
    // MASK BIT 23 AND ABOVE TO MAKE IT A TRUE OFFSET

    if (odd) return(READ_VIP32(SC1400_VIP_ODD_BASE) & 0x007FFFFF);
    return(READ_VIP32(SC1400_VIP_EVEN_BASE) & 0x007FFFFF);
}

/*-----------------------------------------------------------------------------
 * gfx_get_vip_pitch
 *-----------------------------------------------------------------------------
 */
#if GFX_VIDEO_DYNAMIC
unsigned long sc1400_get_vip_pitch(void)
#else
unsigned long gfx_get_vip_pitch(void)
#endif
{
    return(READ_VIP32(SC1400_VIP_PITCH) & 0x0000FFFF);
}

/*-----------------------------------------------------------------------------
 * gfx_get_vbi_enable
 *-----------------------------------------------------------------------------
 */
#if GFX_VIDEO_DYNAMIC
int sc1400_get_vbi_enable(void)
#else
int gfx_get_vbi_enable(void)
#endif
{
    if (READ_VIP32(SC1400_VIP_CONTROL) & 0x00000200) return(1);
    return(0);
}

/*-----------------------------------------------------------------------------
 * gfx_get_vbi_base
 *-----------------------------------------------------------------------------
 */
#if GFX_VIDEO_DYNAMIC
unsigned long sc1400_get_vbi_base(int odd)
#else
unsigned long gfx_get_vbi_base(int odd)
#endif
{
    // MASK BIT 23 AND ABOVE TO MAKE IT A TRUE OFFSET

    if (odd) return(READ_VIP32(SC1400_VBI_ODD_BASE) & 0x007FFFFF);
    return(READ_VIP32(SC1400_VBI_EVEN_BASE) & 0x007FFFFF);
}

/*-----------------------------------------------------------------------------
 * gfx_get_vbi_pitch
 *-----------------------------------------------------------------------------
 */
#if GFX_VIDEO_DYNAMIC
unsigned long sc1400_get_vbi_pitch(void)
#else
unsigned long gfx_get_vbi_pitch(void)
#endif
{
    return(READ_VIP32(SC1400_VBI_PITCH) & 0x0000FFFF);
}

#endif /* GFX_READ_ROUTINES */

/* END OF FILE */