gpeflat.cpp

WinCE 3.0 BSP, 包含Inter SA1110, Intel_815E, Advantech_PCM9574 等

	}
	else
	{
		m_CursorDisabled = FALSE;		// yes, so tag as not disabled

		// allocate memory based on new cursor size
        m_CursorBackingStore = new UCHAR[(cX * (m_colorDepth >> 3)) * cY];
        m_CursorXorShape = new UCHAR[cX * cY];
        m_CursorAndShape = new UCHAR[cX * cY];

		// store size and hotspot for new cursor
		m_CursorSize.x = cX;
		m_CursorSize.y = cY;
		m_CursorHotspot.x = xHot;
		m_CursorHotspot.y = yHot;

		andPtr = (UCHAR*)pMask->Buffer();
		xorPtr = (UCHAR*)pMask->Buffer() + (cY * pMask->Stride());

		// store OR and AND mask for new cursor
		for (row = 0; row < cY; row++)
		{
			andLine = &m_CursorAndShape[cX * row];
			xorLine = &m_CursorXorShape[cX * row];

			for (col = 0; col < cX / 8; col++)
			{
				bAnd = andPtr[row * pMask->Stride() + col];
				bXor = xorPtr[row * pMask->Stride() + col];

				for (bitMask = 0x0080, i = 0; i < 8; bitMask >>= 1, i++)
				{
					andLine[(col * 8) + i] = bAnd & bitMask ? 0xFF : 0x00;
					xorLine[(col * 8) + i] = bXor & bitMask ? 0xFF : 0x00;
				}
			}
		}
	}

	return	S_OK;
}

SCODE	GPEFlat::MovePointer(INT xPosition, INT yPosition)
{
	DEBUGMSG(GPE_ZONE_CURSOR, (TEXT("GPEFlat::MovePointer(%d, %d)\r\n"), xPosition, yPosition));

	CursorOff();

	if (xPosition != -1 || yPosition != -1)
	{
		// compute new cursor rect
		m_CursorRect.left = xPosition - m_CursorHotspot.x;
		m_CursorRect.right = m_CursorRect.left + m_CursorSize.x;
		m_CursorRect.top = yPosition - m_CursorHotspot.y;
		m_CursorRect.bottom = m_CursorRect.top + m_CursorSize.y;

		CursorOn();
	}

	return	S_OK;
}

void	GPEFlat::WaitForNotBusy(void)
{
	DEBUGMSG (GPE_ZONE_INIT, (TEXT("GPEFlat::WaitForNotBusy\r\n")));
	return;
}

int		GPEFlat::IsBusy(void)
{
	DEBUGMSG (GPE_ZONE_INIT, (TEXT("GPEFlat::IsBusy\r\n")));
	return	0;
}

void	GPEFlat::GetPhysicalVideoMemory(unsigned long *physicalMemoryBase, unsigned long *videoMemorySize)
{
	DEBUGMSG (GPE_ZONE_INIT, (TEXT("GPEFlat::GetPhysicalVideoMemory\r\n")));

	*physicalMemoryBase = m_pvFlatFrameBuffer;
	*videoMemorySize = m_cbScanLineLength * m_cyPhysicalScreen;
}

#ifdef	DD_ENABLE
void	GPEFlat::GetVirtualVideoMemory(unsigned long *virtualMemoryBase, unsigned long *videoMemorySize)
{
	DEBUGMSG (GPE_ZONE_INIT, (TEXT("GPEFlat::GetVirtualVideoMemory\r\n")));

	*virtualMemoryBase = m_VirtualFrameBuffer;
	*videoMemorySize = m_cbScanLineLength * m_cyPhysicalScreen;
}
#endif	// DD_ENABLE

SCODE	GPEFlat::AllocSurface(GPESurf **surface, INT width, INT height, EGPEFormat format, INT surfaceFlags)
{
	DEBUGMSG (GPE_ZONE_INIT, (TEXT("GPEFlat::AllocSurface\r\n")));

	if (surfaceFlags & GPE_REQUIRE_VIDEO_MEMORY)
	{
		return	E_OUTOFMEMORY;
	}

	// Allocate from system memory
#ifdef	DD_ENABLE
	*surface = (GPESurf *)new DDGPESurf(width, height, format);
#else	// DD_ENABLE
	*surface = new GPESurf(width, height, format);
#endif	// DD_ENABLE

	if (*surface != NULL)
	{
		// Check that the bits were allocated succesfully
		if (((*surface)->Buffer()) == NULL)
		{
			delete *surface;				// Clean up
		}
		else
		{
			return S_OK;
		}
	}
	return E_OUTOFMEMORY;
}

SCODE	GPEFlat::WrappedEmulatedLine (GPELineParms *lineParameters)
{
	SCODE	retval;
	RECT	bounds;
	int		N_plus_1;				// Minor length of bounding rect + 1

	// calculate the bounding-rect to determine overlap with cursor
	if (lineParameters->dN)			// The line has a diagonal component (we'll refresh the bounding rect)
	{
		N_plus_1 = 2 + ((lineParameters->cPels * lineParameters->dN) / lineParameters->dM);
	}
	else
	{
		N_plus_1 = 1;
	}

	switch(lineParameters->iDir)
	{
		case 0:
			bounds.left = lineParameters->xStart;
			bounds.top = lineParameters->yStart;
			bounds.right = lineParameters->xStart + lineParameters->cPels + 1;
			bounds.bottom = bounds.top + N_plus_1;
			break;
		case 1:
			bounds.left = lineParameters->xStart;
			bounds.top = lineParameters->yStart;
			bounds.bottom = lineParameters->yStart + lineParameters->cPels + 1;
			bounds.right = bounds.left + N_plus_1;
			break;
		case 2:
			bounds.right = lineParameters->xStart + 1;
			bounds.top = lineParameters->yStart;
			bounds.bottom = lineParameters->yStart + lineParameters->cPels + 1;
			bounds.left = bounds.right - N_plus_1;
			break;
		case 3:
			bounds.right = lineParameters->xStart + 1;
			bounds.top = lineParameters->yStart;
			bounds.left = lineParameters->xStart - lineParameters->cPels;
			bounds.bottom = bounds.top + N_plus_1;
			break;
		case 4:
			bounds.right = lineParameters->xStart + 1;
			bounds.bottom = lineParameters->yStart + 1;
			bounds.left = lineParameters->xStart - lineParameters->cPels;
			bounds.top = bounds.bottom - N_plus_1;
			break;
		case 5:
			bounds.right = lineParameters->xStart + 1;
			bounds.bottom = lineParameters->yStart + 1;
			bounds.top = lineParameters->yStart - lineParameters->cPels;
			bounds.left = bounds.right - N_plus_1;
			break;
		case 6:
			bounds.left = lineParameters->xStart;
			bounds.bottom = lineParameters->yStart + 1;
			bounds.top = lineParameters->yStart - lineParameters->cPels;
			bounds.right = bounds.left + N_plus_1;
			break;
		case 7:
			bounds.left = lineParameters->xStart;
			bounds.bottom = lineParameters->yStart + 1;
			bounds.right = lineParameters->xStart + lineParameters->cPels + 1;
			bounds.top = bounds.bottom - N_plus_1;
			break;
		default:
			DEBUGMSG(GPE_ZONE_ERROR,(TEXT("Invalid direction: %d\r\n"), lineParameters->iDir));
			return E_INVALIDARG;
	}

	// check for line overlap with cursor and turn off cursor if overlaps
	if (m_CursorVisible && !m_CursorDisabled &&
		m_CursorRect.top < bounds.bottom && m_CursorRect.bottom > bounds.top &&
		m_CursorRect.left < bounds.right && m_CursorRect.right > bounds.left)
	{
		CursorOff();
		m_CursorForcedOff = TRUE;
	}

	// do emulated line
	retval = EmulatedLine (lineParameters);

	// se if cursor was forced off because of overlap with line bouneds and turn back on
	if (m_CursorForcedOff)
	{
		m_CursorForcedOff = FALSE;
		CursorOn();
	}

	return	retval;

}

SCODE	GPEFlat::Line(GPELineParms *lineParameters, EGPEPhase phase)
{
	DEBUGMSG (GPE_ZONE_INIT, (TEXT("GPEFlat::Line\r\n")));

	if (phase == gpeSingle || phase == gpePrepare)
	{

		if ((lineParameters->pDst != m_pPrimarySurface))
		{
			lineParameters->pLine = EmulatedLine;
		}
		else
		{
			lineParameters->pLine = (SCODE (GPE::*)(struct GPELineParms *)) WrappedEmulatedLine;
		}
	}
	return S_OK;
}

SCODE	GPEFlat::BltPrepare(GPEBltParms *blitParameters)
{
	RECTL	rectl;

	DEBUGMSG (GPE_ZONE_INIT, (TEXT("GPEFlat::BltPrepare\r\n")));

	// default to base EmulatedBlt routine
	blitParameters->pBlt = EmulatedBlt;

	// see if we need to deal with cursor
	if (m_CursorVisible && !m_CursorDisabled)
	{
		// check for destination overlap with cursor and turn off cursor if overlaps
		if (blitParameters->pDst == m_pPrimarySurface)	// only care if dest is main display surface
		{
			if (blitParameters->prclDst != NULL)		// make sure there is a valid prclDst
			{
				rectl = *blitParameters->prclDst;		// if so, use it
			}
			else
			{
				rectl = m_CursorRect;					// if not, use the Cursor rect - this forces the cursor to be turned off in this case
			}

			if (m_CursorRect.top < rectl.bottom && m_CursorRect.bottom > rectl.top &&
				m_CursorRect.left < rectl.right && m_CursorRect.right > rectl.left)
			{
				CursorOff();
				m_CursorForcedOff = TRUE;
			}
		}

		// check for source overlap with cursor and turn off cursor if overlaps
		if (blitParameters->pSrc == m_pPrimarySurface)	// only care if source is main display surface
		{
			if (blitParameters->prclSrc != NULL)		// make sure there is a valid prclSrc
			{
				rectl = *blitParameters->prclSrc;		// if so, use it
			}
			else
			{
				rectl = m_CursorRect;					// if not, use the CUrsor rect - this forces the cursor to be turned off in this case
			}
			if (m_CursorRect.top < rectl.bottom && m_CursorRect.bottom > rectl.top &&
				m_CursorRect.left < rectl.right && m_CursorRect.right > rectl.left)
			{
				CursorOff();
				m_CursorForcedOff = TRUE;
			}
		}
	}

	// see if there are any optimized software blits available
	EmulatedBltSelect02(blitParameters);
	EmulatedBltSelect08(blitParameters);
	EmulatedBltSelect16(blitParameters);

	return S_OK;
}

SCODE	GPEFlat::BltComplete(GPEBltParms *blitParameters)
{
	DEBUGMSG (GPE_ZONE_INIT, (TEXT("GPEFlat::BltComplete\r\n")));

	// see if cursor was forced off because of overlap with source or destination and turn back on
	if (m_CursorForcedOff)
	{
		m_CursorForcedOff = FALSE;
		CursorOn();
	}

	return S_OK;
}

INT		GPEFlat::InVBlank(void)
{
	DEBUGMSG (GPE_ZONE_INIT, (TEXT("GPEFlat::InVBlank\r\n")));
	return 0;
}

SCODE	GPEFlat::SetPalette(const PALETTEENTRY *source, USHORT firstEntry, USHORT numEntries)
{
	DEBUGMSG (GPE_ZONE_INIT, (TEXT("GPEFlat::SetPalette\r\n")));

	if (firstEntry < 0 || firstEntry + numEntries > 256 || source == NULL)
	{
		return	E_INVALIDARG;
	}

	for(; numEntries; numEntries--)
	{
		char	red, green, blue, index;

		index = (unsigned char)(firstEntry++);
		red = source->peRed >> 2;
		green = source->peGreen >> 2;
		blue = source->peBlue >> 2;

		source++;

		__asm
		{
			push	dx
			push	ax

			mov		dx, reg_DAC_WR_AD
			mov		al, index
			out		dx, al

			mov		dx, reg_DAC_DATA

			mov		al, red
			out		dx, al

			mov		al, green
			out		dx, al

			mov		al, blue
			out		dx, al

			pop		ax
			pop		dx
		}
	}

	return	S_OK;
}

ULONG	GPEFlat::GetGraphicsCaps()
{
	if (m_pMode)
	{
		if (m_pMode->Bpp == 16)		// if in 16bpp mode, return GCAPS_GRAY16 to denote that we support anti-aliased fonts
		{
			return	GCAPS_GRAY16;
		}
	}
	return	0;
}

#ifndef	DD_ENABLE	// if not a DDraw driver, then include dummy versions of these function
void	RegisterDDHALAPI(void)
{
	return;	// no DDHAL support
}

void HALInit()
{
	DEBUGMSG( 0,(TEXT("HALInit: Stub, Shouldn't have come in hereX\n")));
	RETAILMSG( 0,(TEXT("HALInit: Stub, Shouldn't have come in hereX\n")));
}
#endif //DD_SUPPORT

ULONG gBitMasks[] = { 0x0001,0x0002,0x0000 };

ULONG *APIENTRY DrvGetMasks(DHPDEV dhpdev)
{
	return gBitMasks;
}