platform.reg

来自「WinCE 3.0 BSP, 包含Inter SA1110, Intel_815」· REG 代码 · 共 240 行

;
;  Copyright(c) 1998,1999 SIC/Hitachi,Ltd.
;
;	Module Name:
;
;		platform.reg
;
;	Revision History:
;
;		26th April 1999		Released
;		26th May   1999		Registered items on IRDA
;
; Platform type: 1=DK3, 2=ODO 3=Rose

[HKEY_LOCAL_MACHINE\Platform]
   "Name"="Hitachi Aspen Reference Platform"
   "Type"=dword:4
IF ENABLE_ETHER
[HKEY_LOCAL_MACHINE\Comm\Ident]
	"Username"="Administrator"
	"Password"="windsurf"
	"Domain"="ImpactZone"

[HKEY_LOCAL_MACHINE\Comm\SMSC100FD]
	"DisplayName"="SMSC100FD Ethernet Driver"
	"Group"="NDIS"
	"ImagePath"="Smsc100Fd.dll"

[HKEY_LOCAL_MACHINE\Comm\SMSC100FD\Linkage]
	"Route"=multi_sz:"SMSC100FD1"

[HKEY_LOCAL_MACHINE\Comm\SMSC100FD1]
	"DisplayName"="SMSC100FD Ethernet Driver"
	"Group"="NDIS"
	"ImagePath"="Smsc100Fd.dll"

[HKEY_LOCAL_MACHINE\Comm\SMSC100FD1\Parms]
	"BusNumber"=dword:0
	"BusType"=dword:0
	"InterruptNumber"=dword:06
	"IoBaseAddress"=dword:A4400300;; ETHERNET_BASE
	"IoMultiplier"=dword:1

[HKEY_LOCAL_MACHINE\Comm\SMSC100FD1\Parms\TcpIp]
	"EnableDHCP"=dword:1
	"DefaultGateway"=multi_sz:"0.0.0.0"
	"IpAddress"=multi_sz:"0.0.0.0"
	"Subnetmask"=multi_sz:"0.0.0.0"
	"WINS"=multi_sz:""
	"DNS"=multi_sz:""

[HKEY_LOCAL_MACHINE\Comm\Tcpip\Linkage]
   ; This should be MULTI_SZ
   ; This is the list of llip drivers to load
    "Bind"=multi_sz:"SMSC100FD1"
ENDIF

IF ODO_NOAUDIO !
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\WaveDev\]
   "Prefix"="WAV"
   "Dll"="wavedev.dll"
   "Index"=dword:1
   "Order"=dword:0
ENDIF

IF ODO_NOSERIAL !
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\Serial]
   "DeviceArrayIndex"=dword:0
   "Prefix"="COM"
   "Dll"="HDC16550.Dll"
   "Order"=dword:0
ENDIF

IF IMGNOSIR !
IF ODO_NOSERIAL !
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\RawIR]
   "Tsp"="Unimodem.dll"
   "DeviceArrayIndex"=dword:1  ;
   "Prefix"="COM"
   "Dll"="HDC16550.Dll"
   "Order"=dword:1
   "Index"=dword:4
   "DeviceType"=dword:0
   "FriendlyName"="Raw IR Port on COM4:"
ENDIF

[HKEY_LOCAL_MACHINE\ExtModems\NullIrDA]
   "Port"="COM4:"
   "DeviceType"=dword:2
   "FriendlyName"="Null modem for Raw IR Port"

[HKEY_LOCAL_MACHINE\Comm\IrDA\Linkage]
    "Bind"=multi_sz:"Irsir1"
    
[HKEY_LOCAL_MACHINE\Comm\Irsir]
   "DisplayName"="Serial (COM) IrDA Driver"
   "Group"="NDIS"
   "ImagePath"="irsir.dll"

[HKEY_LOCAL_MACHINE\Comm\Irsir\Linkage]
   "Route"=multi_sz:"Irsir1"

[HKEY_LOCAL_MACHINE\Comm\Irsir1\Parms]
   "BusNumber"=dword:0
   "BusType"=dword:0
   "Port"=dword:4
   ; 0 = Use external dongle, 1 = Use internal IR
   "IntIR"=dword:1
   ; 0 = Internal transceiver, 1 = Extended Systems JetEye dongle
   "TransceiverType"=dword:0
ENDIF
IF IMGNOSIR
[HKEY_LOCAL_MACHINE\Comm\IrDA\Linkage]
   "Bind"=multi_sz:"Irda1"

[HKEY_LOCAL_MACHINE\Comm\Irda]
   "DisplayName"="Serial (COM) IrDA Driver"
   "Group"="NDIS"
   "ImagePath"="irda.dll"

[HKEY_LOCAL_MACHINE\Comm\Irda\Linkage]
   "Route"=multi_sz:"Irda1"

[HKEY_LOCAL_MACHINE\Comm\Irda1\Parms]
;  Supported BoardType:
;       PC87108: 0x0
;       PC87308: 0x1
;       PC87338: 0x2
;       PC87560: Not supported
   "BoardType"=dword:3

;  Supported DongleType:
;       HP:      0
;       TEMIC:   1
;       SHARP:   2
;       DELL:    3
;       PNPDONG: 4
   "DongleType"=dword:1

   "BusNumber"=dword:0
   "BusType"=dword:1
   "ConfigBase"=dword:398
   "Irq"=dword:5
   "Dma"=dword:0

[HKEY_LOCAL_MACHINE\ExtModems\NullIrCOMM]
   "Port"="COM5"
   "DeviceType"=dword:2
   "FriendlyName"="Null modem for IrCOMM"
ENDIF

IF ENABLE_USB
; USB - OHCI driver
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\OHCI]
   "Prefix"="HCD"
   "Dll"="ohci.dll"
   "Index"=dword:1
   "Order"=dword:1
   ; Resource config information.  We don't have routines to modify PCI IRQ
   ; and mem base, so we specify two different config modes - if 
   ; UseExistingSettings is non zero, accept whatever resources were assigned 
   ; by the BIOS, and fill in the Irq and MemBase fields dynamically. 
   ; Otherwise, check settings and fail driver load if IRQ doesn't match the 
   ; registry value.
IF CEPC_USB_USE_EXISTING
   "UseExistingSettings"=dword:1
ENDIF
   "UseExistingSettings"=dword:0
   "Irq"=dword:18
   ; We need HD64465 to get Embeded RAM address as well
   ; "MemBase"=dword:A400B000
   "MemBase"=dword:A4000000
ENDIF


;; Registry entries for Aspen Parallel.
;; Need to protect them with IFNDEF later.
; Parallel Port Driver
IF ENABLE_TAHOE_PARALLEL
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\Parallel]
   "DeviceArrayIndex"=dword:0
   "Prefix"="LPT"
   "Dll"="Parallel.Dll"
   "Order"=dword:0
   "IoBase"=dword:A400A000
   "IoLen"=dword:C
   "DeviceType"=dword:0
   "FriendlyName"="Tahoe LPT1:"
   "DevConfig"=hex: 10,00, 00,00, 05,00,00,00, 10,01,00,00, 00,4B,00,00, 00,00, 08, 00, 00, 00,00,00,00
[HKEY_LOCAL_MACHINE\ControlPanel]
   "IsMouse"=dword:1
ENDIF

IF ENABLE_ATAPI
; ATAPI - CD Driver
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\ATAPI]
   "Prefix"="ATA"
   "Dll"="Atapi.Dll"
   "Ioctl"=dword:4
   "Order"=dword:0
   "FSD"=""
   "FOLDER"="MFolder"
ENDIF


IF ENABLE_MQ200
;MediaQ 200 driver

[HKEY_LOCAL_MACHINE\Drivers\Display\MQ200]
   "Rotate"=dword:0
   "PPSupport"=dword:0
   "PPSupportEnable"=dword:0

;; 640x480x16
   "CxScreen"=dword:280
   "CyScreen"=dword:1E0
   "BPP"=dword:10
   "Freq"=dword:3C

;; FB_BASE address
   "FB_BASE"=dword:A7800000

;; OEM run time flag
   "Flag"=dword:00030003

   "MIU2"=dword:00EA0086
   "MIU3"=dword:6C4848C4
   "MIU5"=dword:00000119
   "DC0"=dword:0EF2082A
   "PLL1Freq"=dword:00530000
   
   "PWM"=dword:000000A1
	
[HKEY_LOCAL_MACHINE\Drivers\Display\MQ200\Color]
;; Cursor Color setting
   "CC"=dword:F
   
ENDIF ENABLE_MQ200