platform.reg

来自「WinCE 3.0 BSP, 包含Inter SA1110, Intel_815」· REG 代码 · 共 182 行

;
;
; Platform type: 1=DK3, 2=Perp 3=Rose 20=Puzzle
[HKEY_LOCAL_MACHINE\Platform]
   "Name"="Microsoft Puzzle Version 1.0a"
   "Type"=dword:20

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; SNMP Extension Agent (RFC1213 + CM)
;;

IF IMGSNMP

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\SNMP\Parameters\ValidCommunities]
   "public"=dword:8

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\SNMP\RFC1156Agent]
   "sysContact"="[Your SysContact]"
   "sysLocation"="[SysContact Loc]"

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\SNMP\Parameters\ExtensionAgents]
   "1"="SOFTWARE\\Microsoft\\MIBII\\CurrentVersion"
   "2"="SOFTWARE\\Microsoft\\CM\\CurrentVersion"


[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\MIBII\CurrentVersion]
   "Pathname"="snmp_mibii.dll"

[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\CM\CurrentVersion]
   "Pathname"="cm.dll"

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\SNMP\Parameters\EnableAuthenticationTraps]
   "switch"=dword:1

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\SNMP\Parameters\TrapConfiguration\public]

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\SNMP\Parameters\PermittedManagers]

ENDIF


;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
IF DDI_MQ200
;
;MediaQ MQ200 driver settings
;
[HKEY_LOCAL_MACHINE\Drivers\Display\MQ200]
   "Rotate"=dword:0
   "PPSupport"=dword:0
   "PPSupportEnable"=dword:0

;; 640x480x16
   "CxScreen"=dword:280
   "CyScreen"=dword:1E0
   "BPP"=dword:10
   "Freq"=dword:3C

;; FB_BASE address
   "FB_BASE"=dword:00000000

;; OEM run time flag
   "Flag"=dword:00030503

   "MIU2"=dword:00EA0086
   "MIU3"=dword:6C4848C4
   "MIU5"=dword:00000119
   "DC0"=dword:0EF2082A
   "PLL1Freq"=dword:00530000
   
   "PWM"=dword:000000A1
	
[HKEY_LOCAL_MACHINE\Drivers\Display\MQ200\Color]
;; Cursor Color setting
   "CC"=dword:F
ENDIF   

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
IF ODO_NOAUDIO !
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\WaveDev\]
   "Prefix"="WAV"
   "Dll"="wavedev.dll"
   "Index"=dword:1
   "Order"=dword:0
ENDIF

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

IF ODO_NOUSB !
; USB - OHCI driver
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\OHCI]
   "Prefix"="HCD"
   "Dll"="ohci.dll"
   "Index"=dword:1
   "Order"=dword:1
   "UseExistingSettings"=dword:1
   "Irq"=dword:05
   "MemBase"=dword:16FFF000
   "SysIntr"=dword:16
ENDIF
   
IF IMGPARALLEL
; Parallel Port Driver
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\Parallel]
   "DeviceArrayIndex"=dword:0
   "Prefix"="LPT"
   "Dll"="parallel.Dll"
   "Order"=dword:0
   "IoBase"=dword:378
   "IoLen"=dword:C
   "DeviceType"=dword:0
   "SysIntr"=dword:14
   "FriendlyName"="Parallel Cable on LPT1:"
   "DevConfig"=hex: 10,00, 00,00, 05,00,00,00, 10,01,00,00, 00,4B,00,00, 00,00, 08, 00, 00, 00,00,00,00
ENDIF

[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\Serial]
   "IRQ"=dword:04
   "IoBase"=dword:03F8
   "IoLen"=dword:8
   "SysIntr"=dword:12
   "Dll"="Com16550.dll"
   
; Mouse driver
[HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\MOUSE]
        "DriverName"="kbdmouse.dll"
        "SysIntr"=dword:11

; Keybd driver is the same.
[HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\KEYBD]
        "DriverName"="kbdmouse.dll"
        "SysIntr"=dword:10
        "CalVKey"=dword:0
        "ContLessVKey"=dword:0
        "ContMoreVKey"=dword:0
        "TaskManVKey"=dword:2E

[HKEY_LOCAL_MACHINE\DIRECTINPUT]
    "DDriver"="Hid"


;Network Card Ne2000
[HKEY_LOCAL_MACHINE\Comm\NE2000]
  "DisplayName"="COMM_NE2000 Driver"
  "Group"="NDIS"
 ; "ImagePath"="ne2000.dll"
  
[HKEY_LOCAL_MACHINE\Comm\NE2000\Linkage]
  "Route"=multi_sz:"NE20001"

[HKEY_LOCAL_MACHINE\Comm\NE20001]
  "DisplayName"="NE20001 Driver"
  "Group"="NDIS"
; "ImagePath"="ne2000.dll"

[HKEY_LOCAL_MACHINE\Comm\NE20001\Parms]
  "BusNumber"=dword:0
  "BusType"=dword:5
  "InterruptNumber"=dword:C
  "IoBaseAddress"=dword:0be00
  "Transceiver"=dword:3
  "CardType"=dword:1

[HKEY_LOCAL_MACHINE\Comm\NE20001\Parms\TcpIp]
   "EnableDHCP"=dword:1
  ; This should be MULTI_SZ
  "DefaultGateway"=""
  ; Use zero for broadcast address? (or 255.255.255.255)
  "UseZeroBroadcast"=dword:0
  ; Thus should be MULTI_SZ, the IP address list
   "IpAddress"="0.0.0.0"
  ; This should be MULTI_SZ, the subnet masks for the above IP addresses
   "Subnetmask"="0.0.0.0"



[HKEY_LOCAL_MACHINE\Comm\Tcpip\Linkage]
  ; This should be MULTI_SZ
  ; This is the list of llip drivers to load
  "Bind"=multi_sz:"ppp","ne20001"