grub-0.97-patch6-chinese

grub for dos ,people can use it in dos for calling linux

diff -Naur grub-0.97_splash/stage2/builtins.c grub-0.97_chinese/stage2/builtins.c
--- grub-0.97_splash/stage2/builtins.c	2006-10-24 12:28:51.000000000 +0800
+++ grub-0.97_chinese/stage2/builtins.c	2006-10-24 12:28:52.000000000 +0800
@@ -65,6 +65,8 @@
 int fallback_entries[MAX_FALLBACK_ENTRIES];
 /* The number of current entry.  */
 int current_entryno;
+/* graphics file */
+char graphics_file[64];
 /* The address for Multiboot command-line buffer.  */
 static char *mb_cmdline;
 static char kernel_option_video[64];
@@ -376,7 +378,9 @@
   blocklist_func,
   BUILTIN_MENU | BUILTIN_CMDLINE | BUILTIN_HELP_LIST,
   "blocklist FILE",
-  "Print the blocklist notation of the file FILE."
+  "Print the blocklist notation of the file FILE.",
+  "blocklist FILE",
+  "输出文件的块清单标记。"
 };
 
 #if ! defined(GRUB_UTIL) && ! defined (STAGE1_5)
@@ -937,7 +941,9 @@
   boot_func,
   BUILTIN_MENU | BUILTIN_CMDLINE | BUILTIN_HELP_LIST,
   "boot",
-  "Boot the OS/chain-loader which has been loaded."
+  "Boot the OS/chain-loader which has been loaded.",
+  "boot",
+  "引导已加载的操作系统或扇区链式加载器。"  
 };
 #endif /* ! GRUB_UTIL */
 
@@ -984,7 +990,11 @@
   "bootp [--with-configfile]",
   "Initialize a network device via BOOTP. If the option `--with-configfile'"
   " is given, try to load a configuration file specified by the 150 vendor"
-  " tag."
+  " tag.",
+  "bootp [--with-configfile]",
+  "通过BOOTP初试化网络设备。 "
+  " 如果使用了`--with-configfile'参数，此命令将会试图去加载一个"
+  " 特定的配置文件。"  
 };
 #endif /* ! GRUB_UTIL */
 #endif /* SUPPORT_NETBOOT */
@@ -1136,6 +1146,13 @@
       if (grub_isspace (c) || (c >= ' ' && c <= '~'))
 	grub_putchar (c);
       else
+/* cat Chinese support begin */
+#ifdef SUPPORT_GRAPHICS
+      if (graphics_inited && ushFontReaded)
+        grub_putchar (c);
+      else
+#endif
+/* cat Chinese support end here */
 	grub_putchar ('?');
       if (quit_print)
 	break;
@@ -1152,7 +1169,9 @@
   BUILTIN_MENU | BUILTIN_CMDLINE | BUILTIN_HELP_LIST,
   "cat [--hex] [--skip=S] [--length=L] [--locate=STRING] FILE",
   "Print the contents of the file FILE, or print the locations "
-  "of the string STRING in FILE."
+  "of the string STRING in FILE.",
+  "cat [--hex] [--skip=S] [--length=L] [--locate=STRING] FILE",
+  "显示指定文件的内容，或者显示文件中指定字符串的位置。"
 };
 
 
@@ -1204,7 +1223,10 @@
   "cdrom --add-io-ports=P | --init | --stop",
   "Initialise/stop atapi cdroms or set additional I/O ports for a possible atapi cdrom device."
   " The high word of P specifies the base register of the control block registers, and"
-  " the low word of P specifies the base register of the command block registers."
+  " the low word of P specifies the base register of the command block registers.",
+  "cdrom --add-io-ports=P | --init | --stop",
+  "初始化或者停止所有的 ATAPI CDROM 设备, 或者为一个可能的 ATAPI CDROM 设备设置附加的 IO 端口。"
+  " P 的高字指定设备控制寄存器组的端口基址，P 的低字指定设备命令寄存器组的端口基址。"
 };
 #endif
 
@@ -1931,7 +1953,12 @@
   " RAM boot file format. Use --enable-a20 if you wish to keep"
   " gateA20 alive when transferring control to the boot image."
   " SL specifies length in bytes at the beginning of the image to be"
-  " skipped when loading."
+  " skipped when loading.",
+  "chainloader [--force] [--load-segment=LS] [--load-offset=LO]"
+  " [--load-length=LL] [--skip-length=SL] [--boot-cs=CS] [--boot-ip=IP]"
+  " [--ebx=EBX] [--edx=EDX] [--sdi] [--enable-a20] FILE",
+  "加载扇区链式加载器。若使用了--force参数, 则忽略该扇区的启动"
+  " 标识的有效性。"
 };
 
 
@@ -2020,7 +2047,9 @@
   BUILTIN_MENU | BUILTIN_CMDLINE,
   "cmp FILE1 FILE2",
   "Compare the file FILE1 with the FILE2 and inform the different values"
-  " if any."
+  " if any.",
+  "cmp FILE1 FILE2",
+  "比较两个文件, 并且报告两者之间的不同的信息。"
 };
 
 
@@ -2154,7 +2183,20 @@
   " cyan, red, magenta, brown, light-gray, dark-gray, light-blue,"
   " light-green, light-cyan, light-red, light-magenta, yellow and white."
   " But only the first eight names can be used for BG. You can prefix"
-  " \"blink-\" to FG if you want a blinking foreground color."
+  " \"blink-\" to FG if you want a blinking foreground color.",
+  "color NORMAL [HIGHLIGHT]",
+  "改变菜单的颜色。"
+  " Normal 用于指定菜单项的未选中时的颜色，HIGHLIGHT 则用于"
+  " 指定菜单项的被选中时的颜色。如果你未指定 HIGHLIGHT 色，那么"
+  " 我们将使用 NORMAL 的反色值。颜色值的格式是 \"FG/BG\"。FG 和"
+  " BG 是颜色的名称，如下："
+  " black(黑), blue(蓝), green(绿), cyan(青), red(红), "
+  " magenta(粉红), brown(棕), light-gray(亮灰),dark-gray(暗灰),"
+  " light-blue(浅蓝), light-green(淡绿), light-cyan(淡青), "
+  " light-red(明红), light-magenta(浅红), yellow(黄) 和 "
+  " white(白)。"
+  " 注意，BG 的值只能是前八个。另外，若想使用闪烁的前景色，你在"
+  " FG 前使用前缀 \"blink-\" 即可。"
 };
 
 
@@ -2215,7 +2257,9 @@
   configfile_func,
   BUILTIN_MENU | BUILTIN_CMDLINE | BUILTIN_HELP_LIST,
   "configfile FILE",
-  "Load FILE as the configuration file."
+  "Load FILE as the configuration file.",
+  "configfile FILE",
+  "将指定文件作为配置文件予以加载。"
 };
 
 
@@ -2226,13 +2270,28 @@
   if (debug)
     {
       debug = 0;
+#ifdef SUPPORT_GRAPHICS
+	if (graphics_inited && ushFontReaded)
+      grub_printf (" 除错模式已关闭\n");
+	else
       grub_printf (" Debug mode is turned off\n");
+#else
+      grub_printf (" Debug mode is turned off\n");
+#endif
     }
   else
     {
       debug = 1;
+#ifdef SUPPORT_GRAPHICS
+	if (graphics_inited && ushFontReaded)
+      grub_printf (" 除错模式已打开\n");
+	else
       grub_printf (" Debug mode is turned on\n");
-    }
+#else
+      grub_printf (" Debug mode is turned on\n");
+#endif
+
+	}
 
   return 0;
 }
@@ -2243,7 +2302,9 @@
   debug_func,
   BUILTIN_MENU | BUILTIN_CMDLINE,
   "debug",
-  "Turn on/off the debug mode."
+  "Turn on/off the debug mode.",
+  "debug",
+  "打开/关闭除错模式。"
 };
 
 
@@ -2367,7 +2428,9 @@
   BUILTIN_MENU | BUILTIN_CMDLINE | BUILTIN_HELP_LIST,
   "device DRIVE DEVICE",
   "Specify DEVICE as the actual drive for a BIOS drive DRIVE. This command"
-  " can be used only in the grub shell."
+  " can be used only in the grub shell.",
+  "device DRIVE DEVICE",
+  "声明BIOS驱动器对应的实际物理设备。这条命令只用于grub命令行。"
 };
 #endif /* GRUB_UTIL */
 
@@ -2387,12 +2450,13 @@
   dhcp_func,
   BUILTIN_CMDLINE | BUILTIN_MENU | BUILTIN_HELP_LIST,
   "dhcp",
-  "Initialize a network device via DHCP."
+  "Initialize a network device via DHCP.",
+  "dhcp",
+  "通过DHCP初试化网络设备。"
 };
 #endif /* SUPPORT_NETBOOT */
 
-
-static int terminal_func (char *arg, int flags);
+static int terminal_func (char *arg, int flags);
 
 #ifdef SUPPORT_GRAPHICS
 
@@ -2444,7 +2508,9 @@
   splashimage_func,
   BUILTIN_CMDLINE | BUILTIN_MENU | BUILTIN_HELP_LIST,
   "splashimage FILE",
-  "Load FILE as the background image when in graphics mode."
+  "Load FILE as the background image when in graphics mode.",
+  "splashimage FILE",
+  "图形模式下载入背景图片文件。",
 };
 
 
@@ -2474,7 +2540,11 @@
   BUILTIN_CMDLINE | BUILTIN_MENU | BUILTIN_HELP_LIST,
   "foreground RRGGBB",
   "Sets the foreground color when in graphics mode."
-  "RR is red, GG is green, and BB blue. Numbers must be in hexadecimal."
+  "RR is red, GG is green, and BB blue. Numbers must be in hexadecimal.",
+  "foreground RRGGBB",
+  "设置图形模式下的前景色。"
+  " RR 代表红色, GG 代表绿色, BB 代表蓝色。"
+  " 注意他们都使用十六进制的值。"
 };
 
 
@@ -2503,7 +2573,11 @@
   BUILTIN_CMDLINE | BUILTIN_MENU | BUILTIN_HELP_LIST,
   "background RRGGBB",
   "Sets the background color when in graphics mode."
-  "RR is red, GG is green, and BB blue. Numbers must be in hexadecimal."
+  "RR is red, GG is green, and BB blue. Numbers must be in hexadecimal.",
+  "background RRGGBB",
+  "设置图形模式下的背景色。"
+  " RR 代表红色, GG 代表绿色, BB 代表蓝色。"
+  " 注意他们都使用十六进制的值。"
 };
 
 #endif /* SUPPORT_GRAPHICS */
@@ -2524,7 +2598,9 @@
   clear_func,
   BUILTIN_MENU | BUILTIN_CMDLINE | BUILTIN_HELP_LIST,
   "clear",
-  "Clear the screen"
+  "Clear the screen",
+  "clear",
+  "清屏幕。"
 };
 
 
@@ -2566,7 +2642,9 @@
   displayapm_func,
   BUILTIN_MENU | BUILTIN_CMDLINE | BUILTIN_HELP_LIST,
   "displayapm",
-  "Display APM BIOS information."
+  "Display APM BIOS information.",
+  "displayapm",
+  "显示 APM BIOS 的相关信息。"
 };
 
 
@@ -2575,22 +2653,59 @@
 displaymem_func (char *arg, int flags)
 {
   if (get_eisamemsize () != -1)
-    grub_printf (" EISA Memory BIOS Interface is present\n");
+  {
+#ifdef SUPPORT_GRAPHICS
+	if (graphics_inited && ushFontReaded)
+		grub_printf (" EISA内存BIOS接口存在\n");
+	else
+		grub_printf (" EISA Memory BIOS Interface is present\n");
+#else
+		grub_printf (" EISA Memory BIOS Interface is present\n");
+#endif
+}
   if (get_mmap_entry ((void *) SCRATCHADDR, 0) != 0
       || *((int *) SCRATCHADDR) != 0)
-    grub_printf (" Address Map BIOS Interface is present\n");
-
-  grub_printf (" Lower memory: %uK, "
+      {
+#ifdef SUPPORT_GRAPHICS
+	if (graphics_inited && ushFontReaded)
+	{
+      grub_printf (" 地址变换BIOS接口存在\n");
+      grub_printf (" 低端内存: %uK, "
+	       "上位内存: %uK\n",
+	       mbi.mem_lower, mbi.mem_upper);
+	}
+	else
+	{
+      grub_printf (" Address Map BIOS Interface is present\n");
+      grub_printf (" Lower memory: %uK, "
 	       "Upper memory (to first chipset hole): %uK\n",
 	       mbi.mem_lower, mbi.mem_upper);
+	}
+#else
+      grub_printf (" Address Map BIOS Interface is present\n");
+      grub_printf (" Lower memory: %uK, "
+	       "Upper memory (to first chipset hole): %uK\n",
+	       mbi.mem_lower, mbi.mem_upper);
+#endif
+}
 
   if (mbi.flags & MB_INFO_MEM_MAP)
     {
       struct AddrRangeDesc *map = (struct AddrRangeDesc *) mbi.mmap_addr;
       unsigned long end_addr = mbi.mmap_addr + mbi.mmap_length;
 
+#ifdef SUPPORT_GRAPHICS
+	if (graphics_inited && ushFontReaded)
+      grub_printf (" [地址区域描述符"
+		   "紧随于(值为64位)]\n");
+	else
+      grub_printf (" [Address Range Descriptor entries "
+		   "immediately follow (values are 64-bit)]\n");
+#else
       grub_printf (" [Address Range Descriptor entries "
 		   "immediately follow (values are 64-bit)]\n");
+#endif
+
       while (end_addr > (unsigned long) map)
 	{
 	  char *str;
@@ -2599,6 +2714,16 @@
 	    str = "Usable RAM";
 	  else
 	    str = "Reserved";
+#ifdef SUPPORT_GRAPHICS
+	if (graphics_inited && ushFontReaded)
+	  grub_printf ("   %s:  基址:  0x%x X 4GB + 0x%x,\n"
+		       "      长度:   0x%x X 4GB + 0x%x 字节\n",
+		       str,
+		       (unsigned long) (map->BaseAddr >> 32),
+		       (unsigned long) (map->BaseAddr & 0xFFFFFFFF),
+		       (unsigned long) (map->Length >> 32),
+		       (unsigned long) (map->Length & 0xFFFFFFFF));
+	else
 	  grub_printf ("   %s:  Base Address:  0x%x X 4GB + 0x%x,\n"
 		       "      Length:   0x%x X 4GB + 0x%x bytes\n",
 		       str,
@@ -2606,7 +2731,15 @@
 		       (unsigned long) (map->BaseAddr & 0xFFFFFFFF),
 		       (unsigned long) (map->Length >> 32),
 		       (unsigned long) (map->Length & 0xFFFFFFFF));
-
+#else
+	  grub_printf ("   %s:  Base Address:  0x%x X 4GB + 0x%x,\n"
+		       "      Length:   0x%x X 4GB + 0x%x bytes\n",
+		       str,
+		       (unsigned long) (map->BaseAddr >> 32),
+		       (unsigned long) (map->BaseAddr & 0xFFFFFFFF),
+		       (unsigned long) (map->Length >> 32),
+		       (unsigned long) (map->Length & 0xFFFFFFFF));
+#endif
 	  map = ((struct AddrRangeDesc *) (((int) map) + 4 + map->size));
 	}
     }
@@ -2621,7 +2754,10 @@
   BUILTIN_MENU | BUILTIN_CMDLINE | BUILTIN_HELP_LIST,
   "displaymem",
   "Display what GRUB thinks the system address space map of the"
-  " machine is, including all regions of physical RAM installed."
+  " machine is, including all regions of physical RAM installed.",
+  "displaymem",
+  "显示 GRUB 所判断到的当前系统的内存分布，包括所有"
+  " 物理内存区域。"
 };
 
 
@@ -2680,7 +2816,10 @@
     BUILTIN_MENU | BUILTIN_CMDLINE,
     "dump FROM TO",
     "Dump the contents of the file FROM to the file TO. FROM must be"
-    " a GRUB file and TO must be an OS file."
+    " a GRUB file and TO must be an OS file.",
+    "dump FROM TO",
+    "显示诸多文件的内容。注意，FROM 所指定的必须是一个 GRUB"
+	" 文件，TO 所指定的必须是一个 OS 文件。"
   };
 #endif /* GRUB_UTIL */
 
@@ -2827,7 +2966,11 @@
   "embed STAGE1_5 DEVICE",
   "Embed the Stage 1.5 STAGE1_5 in the sectors after MBR if DEVICE"
   " is a drive, or in the \"bootloader\" area if DEVICE is a FFS partition."
-  " Print the number of sectors which STAGE1_5 occupies if successful."
+  " Print the number of sectors which STAGE1_5 occupies if successful.",
+  "embed STAGE1_5 DEVICE",