ppc.h

IBM PowerPC 405 在DiabData开发环境下的ucosII移植代码

#ifndef _PPC_PROCESSOR_H
#define _PPC_PROCESSOR_H

#define MSR_VEC		(1<<25)		/* Enable AltiVec */
#define MSR_POW		(1<<18)		/* Enable Power Management */
#define MSR_WE		(1<<18)		/* Wait State Enable */
#define MSR_TGPR	(1<<17)		/* TLB Update registers in use */
#define MSR_CE		(1<<17)		/* Critical Interrupt Enable */
#define MSR_ILE		(1<<16)		/* Interrupt Little Endian */
#define MSR_EE		(1<<15)		/* External Interrupt Enable */
#define MSR_PR		(1<<14)		/* Problem State / Privilege Level */
#define MSR_FP		(1<<13)		/* Floating Point enable */
#define MSR_ME		(1<<12)		/* Machine Check Enable */
#define MSR_FE0		(1<<11)		/* Floating Exception mode 0 */
#define MSR_SE		(1<<10)		/* Single Step */
#define MSR_BE		(1<<9)		/* Branch Trace */
#define MSR_DE		(1<<9) 		/* Debug Exception Enable */
#define MSR_FE1		(1<<8)		/* Floating Exception mode 1 */
#define MSR_IP		(1<<6)		/* Exception prefix 0x000/0xFFF */
#define MSR_IR		(1<<5) 		/* Instruction Relocate */
#define MSR_DR		(1<<4) 		/* Data Relocate */
#define MSR_PE		(1<<3)		/* Protection Enable */
#define MSR_PX		(1<<2)		/* Protection Exclusive Mode */
#define MSR_RI		(1<<1)		/* Recoverable Exception */
#define MSR_LE		(1<<0) 		/* Little Endian */

#define MSR_		MSR_ME|MSR_RI
#define MSR_KERNEL      MSR_|MSR_IR|MSR_DR
#define MSR_USER	MSR_KERNEL|MSR_PR|MSR_EE

/* Floating Point Status and Control Register (FPSCR) Fields */

#define FPSCR_FX	0x80000000	/* FPU exception summary */
#define FPSCR_FEX	0x40000000	/* FPU enabled exception summary */
#define FPSCR_VX	0x20000000	/* Invalid operation summary */
#define FPSCR_OX	0x10000000	/* Overflow exception summary */
#define FPSCR_UX	0x08000000	/* Underflow exception summary */
#define FPSCR_ZX	0x04000000	/* Zero-devide exception summary */
#define FPSCR_XX	0x02000000	/* Inexact exception summary */
#define FPSCR_VXSNAN	0x01000000	/* Invalid op for SNaN */
#define FPSCR_VXISI	0x00800000	/* Invalid op for Inv - Inv */
#define FPSCR_VXIDI	0x00400000	/* Invalid op for Inv / Inv */
#define FPSCR_VXZDZ	0x00200000	/* Invalid op for Zero / Zero */
#define FPSCR_VXIMZ	0x00100000	/* Invalid op for Inv * Zero */
#define FPSCR_VXVC	0x00080000	/* Invalid op for Compare */
#define FPSCR_FR	0x00040000	/* Fraction rounded */
#define FPSCR_FI	0x00020000	/* Fraction inexact */
#define FPSCR_FPRF	0x0001f000	/* FPU Result Flags */
#define FPSCR_FPCC	0x0000f000	/* FPU Condition Codes */
#define FPSCR_VXSOFT	0x00000400	/* Invalid op for software request */
#define FPSCR_VXSQRT	0x00000200	/* Invalid op for square root */
#define FPSCR_VXCVI	0x00000100	/* Invalid op for integer convert */
#define FPSCR_VE	0x00000080	/* Invalid op exception enable */
#define FPSCR_OE	0x00000040	/* IEEE overflow exception enable */
#define FPSCR_UE	0x00000020	/* IEEE underflow exception enable */
#define FPSCR_ZE	0x00000010	/* IEEE zero divide exception enable */
#define FPSCR_XE	0x00000008	/* FP inexact exception enable */
#define FPSCR_NI	0x00000004	/* FPU non IEEE-Mode */
#define FPSCR_RN	0x00000003	/* FPU rounding control */

/* Special Purpose Registers (SPRNs)*/

#define	SPRN_CDBCR	0x3D7	/* Cache Debug Control Register */
#define	SPRN_CTR	0x009	/* Count Register */
#define	SPRN_DABR	0x3F5	/* Data Address Breakpoint Register */
#define	SPRN_DAC1	0x3F6	/* Data Address Compare 1 */
#define	SPRN_DAC2	0x3F7	/* Data Address Compare 2 */
#define	SPRN_DAR	0x013	/* Data Address Register */
#define	SPRN_DBAT0L	0x219	/* Data BAT 0 Lower Register */
#define	SPRN_DBAT0U	0x218	/* Data BAT 0 Upper Register */
#define	SPRN_DBAT1L	0x21B	/* Data BAT 1 Lower Register */
#define	SPRN_DBAT1U	0x21A	/* Data BAT 1 Upper Register */
#define	SPRN_DBAT2L	0x21D	/* Data BAT 2 Lower Register */
#define	SPRN_DBAT2U	0x21C	/* Data BAT 2 Upper Register */
#define	SPRN_DBAT3L	0x21F	/* Data BAT 3 Lower Register */
#define	SPRN_DBAT3U	0x21E	/* Data BAT 3 Upper Register */
#define	SPRN_DBCR	0x3F2	/* Debug Control Regsiter */
#define	  DBCR_EDM	0x80000000
#define	  DBCR_IDM	0x40000000
#define	  DBCR_RST(x)	(((x) & 0x3) << 28)
#define	    DBCR_RST_NONE       	0
#define	    DBCR_RST_CORE       	1
#define	    DBCR_RST_CHIP       	2
#define	    DBCR_RST_SYSTEM		3
#define	  DBCR_IC	0x08000000	/* Instruction Completion Debug Evnt */
#define	  DBCR_BT	0x04000000	/* Branch Taken Debug Event */
#define	  DBCR_EDE	0x02000000	/* Exception Debug Event */
#define	  DBCR_TDE	0x01000000	/* TRAP Debug Event */
#define	  DBCR_FER	0x00F80000	/* First Events Remaining Mask */
#define	  DBCR_FT	0x00040000	/* Freeze Timers on Debug Event */
#define	  DBCR_IA1	0x00020000	/* Instr. Addr. Compare 1 Enable */
#define	  DBCR_IA2	0x00010000	/* Instr. Addr. Compare 2 Enable */
#define	  DBCR_D1R	0x00008000	/* Data Addr. Compare 1 Read Enable */
#define	  DBCR_D1W	0x00004000	/* Data Addr. Compare 1 Write Enable */
#define	  DBCR_D1S(x)	(((x) & 0x3) << 12)	/* Data Adrr. Compare 1 Size */
#define	    DAC_BYTE	0
#define	    DAC_HALF	1
#define	    DAC_WORD	2
#define	    DAC_QUAD	3
#define	  DBCR_D2R	0x00000800	/* Data Addr. Compare 2 Read Enable */
#define	  DBCR_D2W	0x00000400	/* Data Addr. Compare 2 Write Enable */
#define	  DBCR_D2S(x)	(((x) & 0x3) << 8)	/* Data Addr. Compare 2 Size */
#define	  DBCR_SBT	0x00000040	/* Second Branch Taken Debug Event */
#define	  DBCR_SED	0x00000020	/* Second Exception Debug Event */
#define	  DBCR_STD	0x00000010	/* Second Trap Debug Event */
#define	  DBCR_SIA	0x00000008	/* Second IAC Enable */
#define	  DBCR_SDA	0x00000004	/* Second DAC Enable */
#define	  DBCR_JOI	0x00000002	/* JTAG Serial Outbound Int. Enable */
#define	  DBCR_JII	0x00000001	/* JTAG Serial Inbound Int. Enable */
#define	SPRN_DBCR0	0x3F2	/* Debug Control Register 0 */
#define	SPRN_DBCR1	0x3BD	/* Debug Control Register 1 */
#define	SPRN_DBSR	0x3F0	/* Debug Status Register */
#define	SPRN_DCCR	0x3FA	/* Data Cache Cacheability Register */
#define	  DCCR_NOCACHE		0	/* Noncacheable */
#define	  DCCR_CACHE		1	/* Cacheable */
#define	SPRN_DCMP	0x3D1	/* Data TLB Compare Register */
#define	SPRN_DCWR	0x3BA	/* Data Cache Write-thru Register */
#define	  DCWR_COPY		0	/* Copy-back */
#define	  DCWR_WRITE		1	/* Write-through */
#define	SPRN_DEAR	0x3D5	/* Data Error Address Register */
#define	SPRN_DEC	0x016	/* Decrement Register */
#define	SPRN_DMISS	0x3D0	/* Data TLB Miss Register */
#define	SPRN_DSISR	0x012	/* Data Storage Interrupt Status Register */
#define	SPRN_EAR	0x11A	/* External Address Register */
#define	SPRN_ESR	0x3D4	/* Exception Syndrome Register */
#define	  ESR_IMCP	0x80000000	/* Instr. Machine Check - Protection */
#define	  ESR_IMCN	0x40000000	/* Instr. Machine Check - Non-config */
#define	  ESR_IMCB	0x20000000	/* Instr. Machine Check - Bus error */
#define	  ESR_IMCT	0x10000000	/* Instr. Machine Check - Timeout */
#define	  ESR_PIL	0x08000000	/* Program Exception - Illegal */
#define	  ESR_PPR	0x04000000	/* Program Exception - Priveleged */
#define	  ESR_PTR	0x02000000	/* Program Exception - Trap */
#define	  ESR_DST	0x00800000	/* Storage Exception - Data miss */
#define	  ESR_DIZ	0x00400000	/* Storage Exception - Zone fault */
#define	SPRN_EVPR	0x3D6	/* Exception Vector Prefix Register */
#define	SPRN_HASH1	0x3D2	/* Primary Hash Address Register */
#define	SPRN_HASH2	0x3D3	/* Secondary Hash Address Resgister */
#define	SPRN_HID0	0x3F0	/* Hardware Implementation Register 0 */
#define	  HID0_EMCP	(1<<31)		/* Enable Machine Check pin */
#define	  HID0_EBA	(1<<29)		/* Enable Bus Address Parity */
#define	  HID0_EBD	(1<<28)		/* Enable Bus Data Parity */
#define	  HID0_SBCLK	(1<<27)
#define	  HID0_EICE	(1<<26)
#define	  HID0_ECLK	(1<<25)
#define	  HID0_PAR	(1<<24)
#define	  HID0_DOZE	(1<<23)
#define	  HID0_NAP	(1<<22)
#define	  HID0_SLEEP	(1<<21)
#define	  HID0_DPM	(1<<20)
#define	  HID0_ICE	(1<<15)		/* Instruction Cache Enable */
#define	  HID0_DCE	(1<<14)		/* Data Cache Enable */
#define	  HID0_ILOCK	(1<<13)		/* Instruction Cache Lock */
#define	  HID0_DLOCK	(1<<12)		/* Data Cache Lock */
#define	  HID0_ICFI	(1<<11)		/* Instr. Cache Flash Invalidate */
#define	  HID0_DCI	(1<<10)		/* Data Cache Invalidate */
#define   HID0_SPD	(1<<9)		/* Speculative disable */
#define   HID0_SGE	(1<<7)		/* Store Gathering Enable */
#define	  HID0_SIED	(1<<7)		/* Serial Instr. Execution [Disable] */
#define   HID0_BTIC	(1<<5)		/* Branch Target Instruction Cache Enable */
#define   HID0_ABE	(1<<3)		/* Address Broadcast Enable */
#define	  HID0_BHTE	(1<<2)		/* Branch History Table Enable */
#define	  HID0_BTCD	(1<<1)		/* Branch target cache disable */
#define	SPRN_HID1	0x3F1	/* Hardware Implementation Register 1 */
#define	SPRN_IABR	0x3F2	/* Instruction Address Breakpoint Register */
#define	SPRN_IAC1	0x3F4	/* Instruction Address Compare 1 */
#define	SPRN_IAC2	0x3F5	/* Instruction Address Compare 2 */
#define	SPRN_IBAT0L	0x211	/* Instruction BAT 0 Lower Register */
#define	SPRN_IBAT0U	0x210	/* Instruction BAT 0 Upper Register */
#define	SPRN_IBAT1L	0x213	/* Instruction BAT 1 Lower Register */
#define	SPRN_IBAT1U	0x212	/* Instruction BAT 1 Upper Register */
#define	SPRN_IBAT2L	0x215	/* Instruction BAT 2 Lower Register */
#define	SPRN_IBAT2U	0x214	/* Instruction BAT 2 Upper Register */
#define	SPRN_IBAT3L	0x217	/* Instruction BAT 3 Lower Register */
#define	SPRN_IBAT3U	0x216	/* Instruction BAT 3 Upper Register */
#define	SPRN_ICCR	0x3FB	/* Instruction Cache Cacheability Register */
#define	  ICCR_NOCACHE		0	/* Noncacheable */
#define	  ICCR_CACHE		1	/* Cacheable */
#define	SPRN_ICDBDR	0x3D3	/* Instruction Cache Debug Data Register */
#define	SPRN_ICMP	0x3D5	/* Instruction TLB Compare Register */
#define	SPRN_ICTC	0x3FB	/* Instruction Cache Throttling Control Reg */
#define	SPRN_IMISS	0x3D4	/* Instruction TLB Miss Register */
#define	SPRN_IMMR	0x27E  	/* Internal Memory Map Register */
#define	SPRN_L2CR	0x3F9	/* Level 2 Cache Control Regsiter */
#define	SPRN_LR		0x008	/* Link Register */
#define	SPRN_MMCR0	0x3B8	/* Monitor Mode Control Register 0 */
#define	SPRN_MMCR1	0x3BC	/* Monitor Mode Control Register 1 */
#define	SPRN_PBL1	0x3FC	/* Protection Bound Lower 1 */
#define	SPRN_PBL2	0x3FE	/* Protection Bound Lower 2 */
#define	SPRN_PBU1	0x3FD	/* Protection Bound Upper 1 */
#define	SPRN_PBU2	0x3FF	/* Protection Bound Upper 2 */
#define	SPRN_PID	0x3B1	/* Process ID */
#define	SPRN_PIR	0x3FF	/* Processor Identification Register */
#define	SPRN_PIT	0x3DB	/* Programmable Interval Timer */
#define	SPRN_PMC1	0x3B9	/* Performance Counter Register 1 */
#define	SPRN_PMC2	0x3BA	/* Performance Counter Register 2 */
#define	SPRN_PMC3	0x3BD	/* Performance Counter Register 3 */
#define	SPRN_PMC4	0x3BE	/* Performance Counter Register 4 */
#define	SPRN_PVR	0x11F	/* Processor Version Register */
#define	SPRN_RPA	0x3D6	/* Required Physical Address Register */
#define	SPRN_SDA	0x3BF	/* Sampled Data Address Register */
#define	SPRN_SDR1	0x019	/* MMU Hash Base Register */
#define	SPRN_SGR	0x3B9	/* Storage Guarded Register */
#define	  SGR_NORMAL		0
#define	  SGR_GUARDED		1
#define	SPRN_SIA	0x3BB	/* Sampled Instruction Address Register */
#define	SPRN_SPRG0	0x110	/* Special Purpose Register General 0 */
#define	SPRN_SPRG1	0x111	/* Special Purpose Register General 1 */
#define	SPRN_SPRG2	0x112	/* Special Purpose Register General 2 */
#define	SPRN_SPRG3	0x113	/* Special Purpose Register General 3 */
#define	SPRN_SRR0	0x01A	/* Save/Restore Register 0 */
#define	SPRN_SRR1	0x01B	/* Save/Restore Register 1 */
#define	SPRN_SRR2	0x3DE	/* Save/Restore Register 2 */
#define	SPRN_SRR3 	0x3DF	/* Save/Restore Register 3 */
#define	SPRN_TBHI	0x3DC	/* Time Base High */
#define	SPRN_TBHU	0x3CC	/* Time Base High User-mode */
#define	SPRN_TBLO	0x3DD	/* Time Base Low */
#define	SPRN_TBLU	0x3CD	/* Time Base Low User-mode */
#define	SPRN_TBRL	0x10D	/* Time Base Read Lower Register */
#define	SPRN_TBRU	0x10C	/* Time Base Read Upper Register */
#define	SPRN_TBWL	0x11D	/* Time Base Write Lower Register */
#define	SPRN_TBWU	0x11C	/* Time Base Write Upper Register */
#define	SPRN_TCR	0x3DA	/* Timer Control Register */
#define	  TCR_WP(x)		(((x)&0x3)<<30)	/* WDT Period */
#define	    WP_2_17		0		/* 2^17 clocks */
#define	    WP_2_21		1		/* 2^21 clocks */
#define	    WP_2_25		2		/* 2^25 clocks */
#define	    WP_2_29		3		/* 2^29 clocks */
#define	  TCR_WRC(x)		(((x)&0x3)<<28)	/* WDT Reset Control */
#define	    WRC_NONE		0		/* No reset will occur */
#define	    WRC_CORE		1		/* Core reset will occur */
#define	    WRC_CHIP		2		/* Chip reset will occur */
#define	    WRC_SYSTEM		3		/* System reset will occur */
#define	  TCR_WIE		0x08000000	/* WDT Interrupt Enable */
#define	  TCR_PIE		0x04000000	/* PIT Interrupt Enable */
#define	  TCR_FP(x)		(((x)&0x3)<<24)	/* FIT Period */
#define	    FP_2_9		0		/* 2^9 clocks */
#define	    FP_2_13		1		/* 2^13 clocks */
#define	    FP_2_17		2		/* 2^17 clocks */
#define	    FP_2_21		3		/* 2^21 clocks */
#define	  TCR_FIE		0x00800000	/* FIT Interrupt Enable */
#define	  TCR_ARE		0x00400000	/* Auto Reload Enable */
#define	SPRN_THRM1	0x3FC	/* Thermal Management Register 1 */
#define	  THRM1_TIN		(1<<0)
#define	  THRM1_TIV		(1<<1)
#define	  THRM1_THRES		(0x7f<<2)
#define	  THRM1_TID		(1<<29)
#define	  THRM1_TIE		(1<<30)
#define	  THRM1_V		(1<<31)
#define	SPRN_THRM2	0x3FD	/* Thermal Management Register 2 */
#define	SPRN_THRM3	0x3FE	/* Thermal Management Register 3 */
#define	  THRM3_E		(1<<31)
#define	SPRN_TSR	0x3D8	/* Timer Status Register */
#define	  TSR_ENW		0x80000000	/* Enable Next Watchdog */
#define	  TSR_WIS		0x40000000	/* WDT Interrupt Status */
#define	  TSR_WRS(x)		(((x)&0x3)<<28)	/* WDT Reset Status */
#define	    WRS_NONE		0		/* No WDT reset occurred */
#define	    WRS_CORE		1		/* WDT forced core reset */
#define	    WRS_CHIP		2		/* WDT forced chip reset */
#define	    WRS_SYSTEM		3		/* WDT forced system reset */
#define	  TSR_PIS		0x08000000	/* PIT Interrupt Status */
#define	  TSR_FIS		0x04000000	/* FIT Interrupt Status */
#define	SPRN_UMMCR0	0x3A8	/* User Monitor Mode Control Register 0 */
#define	SPRN_UMMCR1	0x3AC	/* User Monitor Mode Control Register 0 */
#define	SPRN_UPMC1	0x3A9	/* User Performance Counter Register 1 */
#define	SPRN_UPMC2	0x3AA	/* User Performance Counter Register 2 */
#define	SPRN_UPMC3	0x3AD	/* User Performance Counter Register 3 */
#define	SPRN_UPMC4	0x3AE	/* User Performance Counter Register 4 */
#define	SPRN_USIA	0x3AB	/* User Sampled Instruction Address Register */
#define	SPRN_XER	0x001	/* Fixed Point Exception Register */
#define	SPRN_ZPR	0x3B0	/* Zone Protection Register */