sh.h

gcc3.2.1源代码

extern int assembler_dialect;

#define OVERRIDE_OPTIONS 						\
do {									\
  int regno;								\
									\
  sh_cpu = CPU_SH1;							\
  assembler_dialect = 0;						\
  if (TARGET_SH2)							\
    sh_cpu = CPU_SH2;							\
  if (TARGET_SH3)							\
    sh_cpu = CPU_SH3;							\
  if (TARGET_SH3E)							\
    sh_cpu = CPU_SH3E;							\
  if (TARGET_SH4)							\
    {									\
      assembler_dialect = 1;						\
      sh_cpu = CPU_SH4;							\
    }									\
  if (TARGET_SH5)							\
    {									\
      sh_cpu = CPU_SH5;							\
      target_flags |= DALIGN_BIT;					\
      if (TARGET_FPU_ANY)						\
	target_flags |= FMOVD_BIT;					\
      if (TARGET_SHMEDIA)						\
	{								\
	  /* There are no delay slots on SHmedia.  */			\
	  flag_delayed_branch = 0;					\
	  /* Relaxation isn't yet supported for SHmedia */		\
	  target_flags &= ~RELAX_BIT;					\
	}								\
      if (profile_flag || profile_arc_flag)				\
	{								\
	  warning ("Profiling is not supported on this target.");	\
	  profile_flag = profile_arc_flag = 0;				\
	}								\
    }									\
  else									\
    {									\
       /* Only the sh64-elf assembler fully supports .quad properly.  */\
       targetm.asm_out.aligned_op.di = NULL;				\
       targetm.asm_out.unaligned_op.di = NULL;				\
    }									\
									\
  for (regno = 0; regno < FIRST_PSEUDO_REGISTER; regno++)		\
    if (! VALID_REGISTER_P (regno))					\
      sh_register_names[regno][0] = '\0';				\
									\
  for (regno = 0; regno < ADDREGNAMES_SIZE; regno++)			\
    if (! VALID_REGISTER_P (ADDREGNAMES_REGNO (regno)))			\
      sh_additional_register_names[regno][0] = '\0';			\
									\
  if (flag_omit_frame_pointer < 0)					\
   {									\
     /* The debugging information is sufficient,			\
        but gdb doesn't implement this yet */				\
     if (0)								\
      flag_omit_frame_pointer						\
        = (PREFERRED_DEBUGGING_TYPE == DWARF_DEBUG			\
	   || PREFERRED_DEBUGGING_TYPE == DWARF2_DEBUG);		\
     else								\
      flag_omit_frame_pointer = 0;					\
   }									\
									\
  if (flag_pic && ! TARGET_PREFERGOT)					\
    flag_no_function_cse = 1;						\
									\
  /* Never run scheduling before reload, since that can			\
     break global alloc, and generates slower code anyway due		\
     to the pressure on R0.  */						\
  flag_schedule_insns = 0;						\
} while (0)

/* Target machine storage layout.  */

/* Define to use software floating point emulator for REAL_ARITHMETIC and
   decimal <-> binary conversion.  */
#define REAL_ARITHMETIC

/* Define this if most significant bit is lowest numbered
   in instructions that operate on numbered bit-fields.  */

#define BITS_BIG_ENDIAN  0

/* Define this if most significant byte of a word is the lowest numbered.  */
#define BYTES_BIG_ENDIAN (TARGET_LITTLE_ENDIAN == 0)

/* Define this if most significant word of a multiword number is the lowest
   numbered.  */
#define WORDS_BIG_ENDIAN (TARGET_LITTLE_ENDIAN == 0)

/* Define this to set the endianness to use in libgcc2.c, which can
   not depend on target_flags.  */
#if defined(__LITTLE_ENDIAN__)
#define LIBGCC2_WORDS_BIG_ENDIAN 0
#else
#define LIBGCC2_WORDS_BIG_ENDIAN 1
#endif

/* Number of bits in an addressable storage unit.  */
#define BITS_PER_UNIT  8

/* Width in bits of a "word", which is the contents of a machine register.
   Note that this is not necessarily the width of data type `int';
   if using 16-bit ints on a 68000, this would still be 32.
   But on a machine with 16-bit registers, this would be 16.  */
#define BITS_PER_WORD  (TARGET_SHMEDIA ? 64 : 32)
#define MAX_BITS_PER_WORD 64

#define MAX_LONG_TYPE_SIZE MAX_BITS_PER_WORD

/* Width in bits of an `int'.  We want just 32-bits, even if words are
   longer. */
#define INT_TYPE_SIZE 32

/* Width in bits of a `long'.  */
#define LONG_TYPE_SIZE (TARGET_SHMEDIA64 ? 64 : 32)

/* Width in bits of a `long long'.  */
#define LONG_LONG_TYPE_SIZE 64

/* Width in bits of a `long double'.  */
#define LONG_DOUBLE_TYPE_SIZE 64

/* Width of a word, in units (bytes).  */
#define UNITS_PER_WORD	(TARGET_SHMEDIA ? 8 : 4)
#define MIN_UNITS_PER_WORD 4

/* Width in bits of a pointer.
   See also the macro `Pmode' defined below.  */
#define POINTER_SIZE  (TARGET_SHMEDIA64 ? 64 : 32)

/* Allocation boundary (in *bits*) for storing arguments in argument list.  */
#define PARM_BOUNDARY  	(TARGET_SH5 ? 64 : 32)

/* Boundary (in *bits*) on which stack pointer should be aligned.  */
#define STACK_BOUNDARY  BIGGEST_ALIGNMENT

/* The log (base 2) of the cache line size, in bytes.  Processors prior to
   SH2 have no actual cache, but they fetch code in chunks of 4 bytes.
   The SH2/3 have 16 byte cache lines, and the SH4 has a 32 byte cache line */
#define CACHE_LOG (TARGET_CACHE32 ? 5 : TARGET_SH2 ? 4 : 2)

/* Allocation boundary (in *bits*) for the code of a function.
   32 bit alignment is faster, because instructions are always fetched as a
   pair from a longword boundary.  */
#define FUNCTION_BOUNDARY  \
  (TARGET_SMALLCODE ? 16 << TARGET_SHMEDIA : (1 << CACHE_LOG) * 8)

/* On SH5, the lowest bit is used to indicate SHmedia functions, so
   the vbit must go into the delta field of
   pointers-to-member-functions.  */
#define TARGET_PTRMEMFUNC_VBIT_LOCATION \
  (TARGET_SH5 ? ptrmemfunc_vbit_in_delta : ptrmemfunc_vbit_in_pfn)

/* Alignment of field after `int : 0' in a structure.  */
#define EMPTY_FIELD_BOUNDARY  32

/* No data type wants to be aligned rounder than this.  */
#define BIGGEST_ALIGNMENT  (TARGET_ALIGN_DOUBLE ? 64 : 32)

/* The best alignment to use in cases where we have a choice.  */
#define FASTEST_ALIGNMENT (TARGET_SH5 ? 64 : 32)

/* Make strings word-aligned so strcpy from constants will be faster.  */
#define CONSTANT_ALIGNMENT(EXP, ALIGN)	\
  ((TREE_CODE (EXP) == STRING_CST	\
    && (ALIGN) < FASTEST_ALIGNMENT)	\
    ? FASTEST_ALIGNMENT : (ALIGN))

#ifndef MAX_OFILE_ALIGNMENT
#define MAX_OFILE_ALIGNMENT 128
#endif

/* Make arrays of chars word-aligned for the same reasons.  */
#define DATA_ALIGNMENT(TYPE, ALIGN)		\
  (TREE_CODE (TYPE) == ARRAY_TYPE		\
   && TYPE_MODE (TREE_TYPE (TYPE)) == QImode	\
   && (ALIGN) < FASTEST_ALIGNMENT ? FASTEST_ALIGNMENT : (ALIGN))

/* Number of bits which any structure or union's size must be a
   multiple of.  Each structure or union's size is rounded up to a
   multiple of this.  */
#define STRUCTURE_SIZE_BOUNDARY (TARGET_PADSTRUCT ? 32 : 8)

/* Set this nonzero if move instructions will actually fail to work
   when given unaligned data.  */
#define STRICT_ALIGNMENT 1

/* If LABEL_AFTER_BARRIER demands an alignment, return its base 2 logarithm.  */
#define LABEL_ALIGN_AFTER_BARRIER(LABEL_AFTER_BARRIER) \
  barrier_align (LABEL_AFTER_BARRIER)

#define LOOP_ALIGN(A_LABEL) \
  ((! optimize || TARGET_HARVARD || TARGET_SMALLCODE) \
   ? 0 : sh_loop_align (A_LABEL))

#define LABEL_ALIGN(A_LABEL) \
(									\
  (PREV_INSN (A_LABEL)							\
   && GET_CODE (PREV_INSN (A_LABEL)) == INSN				\
   && GET_CODE (PATTERN (PREV_INSN (A_LABEL))) == UNSPEC_VOLATILE	\
   && XINT (PATTERN (PREV_INSN (A_LABEL)), 1) == UNSPECV_ALIGN)		\
   /* explicit alignment insn in constant tables.  */			\
  ? INTVAL (XVECEXP (PATTERN (PREV_INSN (A_LABEL)), 0, 0))		\
  : 0)

/* Jump tables must be 32 bit aligned, no matter the size of the element.  */
#define ADDR_VEC_ALIGN(ADDR_VEC) 2

/* The base two logarithm of the known minimum alignment of an insn length.  */
#define INSN_LENGTH_ALIGNMENT(A_INSN)					\
  (GET_CODE (A_INSN) == INSN						\
   ? 1 << TARGET_SHMEDIA						\
   : GET_CODE (A_INSN) == JUMP_INSN || GET_CODE (A_INSN) == CALL_INSN	\
   ? 1 << TARGET_SHMEDIA						\
   : CACHE_LOG)

/* Standard register usage.  */

/* Register allocation for the Hitachi calling convention:

        r0		arg return
	r1..r3          scratch
	r4..r7		args in
	r8..r13		call saved
	r14		frame pointer/call saved
	r15		stack pointer
	ap		arg pointer (doesn't really exist, always eliminated)
	pr		subroutine return address
	t               t bit
	mach		multiply/accumulate result, high part
	macl		multiply/accumulate result, low part.
	fpul		fp/int communication register
	rap		return address pointer register
	fr0		fp arg return
	fr1..fr3	scratch floating point registers
	fr4..fr11	fp args in
	fr12..fr15	call saved floating point registers  */

#define MAX_REGISTER_NAME_LENGTH 5
extern char sh_register_names[][MAX_REGISTER_NAME_LENGTH + 1];

#define SH_REGISTER_NAMES_INITIALIZER					\
{				                   			\
  "r0",   "r1",   "r2",   "r3",   "r4",   "r5",   "r6",   "r7", 	\
  "r8",   "r9",   "r10",  "r11",  "r12",  "r13",  "r14",  "r15",	\
  "r16",  "r17",  "r18",  "r19",  "r20",  "r21",  "r22",  "r23",	\
  "r24",  "r25",  "r26",  "r27",  "r28",  "r29",  "r30",  "r31",	\
  "r32",  "r33",  "r34",  "r35",  "r36",  "r37",  "r38",  "r39", 	\
  "r40",  "r41",  "r42",  "r43",  "r44",  "r45",  "r46",  "r47",	\
  "r48",  "r49",  "r50",  "r51",  "r52",  "r53",  "r54",  "r55",	\
  "r56",  "r57",  "r58",  "r59",  "r60",  "r61",  "r62",  "r63",	\
  "fr0",  "fr1",  "fr2",  "fr3",  "fr4",  "fr5",  "fr6",  "fr7", 	\
  "fr8",  "fr9",  "fr10", "fr11", "fr12", "fr13", "fr14", "fr15",	\
  "fr16", "fr17", "fr18", "fr19", "fr20", "fr21", "fr22", "fr23",	\
  "fr24", "fr25", "fr26", "fr27", "fr28", "fr29", "fr30", "fr31",	\
  "fr32", "fr33", "fr34", "fr35", "fr36", "fr37", "fr38", "fr39", 	\
  "fr40", "fr41", "fr42", "fr43", "fr44", "fr45", "fr46", "fr47",	\
  "fr48", "fr49", "fr50", "fr51", "fr52", "fr53", "fr54", "fr55",	\
  "fr56", "fr57", "fr58", "fr59", "fr60", "fr61", "fr62", "fr63",	\
  "tr0",  "tr1",  "tr2",  "tr3",  "tr4",  "tr5",  "tr6",  "tr7", 	\
  "xd0",  "xd2",  "xd4",  "xd6",  "xd8",  "xd10", "xd12", "xd14",	\
  "gbr",  "ap",	  "pr",   "t",    "mach", "macl", "fpul", "fpscr",	\
  "rap"									\
}

#define DEBUG_REGISTER_NAMES SH_REGISTER_NAMES_INITIALIZER

#define REGNAMES_ARR_INDEX_1(index) \
  (sh_register_names[index])
#define REGNAMES_ARR_INDEX_2(index) \
  REGNAMES_ARR_INDEX_1 ((index)), REGNAMES_ARR_INDEX_1 ((index)+1)
#define REGNAMES_ARR_INDEX_4(index) \
  REGNAMES_ARR_INDEX_2 ((index)), REGNAMES_ARR_INDEX_2 ((index)+2)
#define REGNAMES_ARR_INDEX_8(index) \
  REGNAMES_ARR_INDEX_4 ((index)), REGNAMES_ARR_INDEX_4 ((index)+4)
#define REGNAMES_ARR_INDEX_16(index) \
  REGNAMES_ARR_INDEX_8 ((index)), REGNAMES_ARR_INDEX_8 ((index)+8)
#define REGNAMES_ARR_INDEX_32(index) \
  REGNAMES_ARR_INDEX_16 ((index)), REGNAMES_ARR_INDEX_16 ((index)+16)
#define REGNAMES_ARR_INDEX_64(index) \
  REGNAMES_ARR_INDEX_32 ((index)), REGNAMES_ARR_INDEX_32 ((index)+32)

#define REGISTER_NAMES \
{ \
  REGNAMES_ARR_INDEX_64 (0), \
  REGNAMES_ARR_INDEX_64 (64), \
  REGNAMES_ARR_INDEX_8 (128), \
  REGNAMES_ARR_INDEX_8 (136), \
  REGNAMES_ARR_INDEX_8 (144), \
  REGNAMES_ARR_INDEX_1 (152) \
}

#define ADDREGNAMES_SIZE 32
#define MAX_ADDITIONAL_REGISTER_NAME_LENGTH 4
extern char sh_additional_register_names[ADDREGNAMES_SIZE] \
  [MAX_ADDITIONAL_REGISTER_NAME_LENGTH + 1];

#define SH_ADDITIONAL_REGISTER_NAMES_INITIALIZER			\
{									\
  "dr0",  "dr2",  "dr4",  "dr6",  "dr8",  "dr10", "dr12", "dr14",	\
  "dr16", "dr18", "dr20", "dr22", "dr24", "dr26", "dr28", "dr30",	\
  "dr32", "dr34", "dr36", "dr38", "dr40", "dr42", "dr44", "dr46",	\
  "dr48", "dr50", "dr52", "dr54", "dr56", "dr58", "dr60", "dr62"	\
}

#define ADDREGNAMES_REGNO(index) \
  ((index < 32) ? (FIRST_FP_REG + (index) * 2) \
   : (-1))

#define ADDREGNAMES_ARR_INDEX_1(index) \
  { (sh_additional_register_names[index]), ADDREGNAMES_REGNO (index) }
#define ADDREGNAMES_ARR_INDEX_2(index) \
  ADDREGNAMES_ARR_INDEX_1 ((index)), ADDREGNAMES_ARR_INDEX_1 ((index)+1)
#define ADDREGNAMES_ARR_INDEX_4(index) \
  ADDREGNAMES_ARR_INDEX_2 ((index)), ADDREGNAMES_ARR_INDEX_2 ((index)+2)
#define ADDREGNAMES_ARR_INDEX_8(index) \
  ADDREGNAMES_ARR_INDEX_4 ((index)), ADDREGNAMES_ARR_INDEX_4 ((index)+4)
#define ADDREGNAMES_ARR_INDEX_16(index) \
  ADDREGNAMES_ARR_INDEX_8 ((index)), ADDREGNAMES_ARR_INDEX_8 ((index)+8)
#define ADDREGNAMES_ARR_INDEX_32(index) \
  ADDREGNAMES_ARR_INDEX_16 ((index)), ADDREGNAMES_ARR_INDEX_16 ((index)+16)

#define ADDITIONAL_REGISTER_NAMES \
{					\
  ADDREGNAMES_ARR_INDEX_32 (0)		\
}

/* Number of actual hardware registers.
   The hardware registers are assigned numbers for the compiler