ttypes.htm

mips架构的bootloader,99左右的版本 但源代码现在没人更新了

	<title>SerialICE Targets</title>
	<h1 align=center>SerialICE Targets</h1>

<!--INDEX "SerialICE targets" -->

SerialICE supports almost any MIPS board as a Target. Each SerialICE
Target needs to be equipped with a suitably configured SerialICE Kernel.
The SerialICE package provides a number of example SerialICE Kernels.
However, it is also quite simple to <a href="kport.htm">port</a>
a kernel to any target board that contains a serial port and 
<a href="icereq.htm">minimal</a> ROM and RAM. This package currently
contains SerialICE Kernel examples for the following boards.<p>


<h2>BDMR400x (4001/2/3) Evaluation Board</h2>
<!--INDEX "BDMR400x (4001/2/3) Evaluation Board" -->
<ul>
<li>Insert the four flash memories containing the 
	<a href="icekern.htm">SerialICE Kernel</a> in U8, 
	U19, U29, and U40.
<li>Connect a serial cable from U28 to the 
	<a href="ctypes.htm">SerialICE Controller or Host</a>.
</ul>

<h2>Nitro (4010) Evaluation Board</h2>
<!--INDEX "Nitro (4010) Evaluation Board" -->
<ul>
<li>Insert the flash memory containing the 
	<a href="icekern.htm">SerialICE Kernel</a> in U18.
<li>Connect a serial cable from J18 to the 
	<a href="ctypes.htm">SerialICE Controller or Host</a>.
</ul>

<h2><a href="bdmr4101.htm">BDMR4101 (4101) Evaluation Board</a></h2>
<!--INDEX "BDMR4101 (4101) Evaluation Board" -->
<ul>
<li>Insert the four flash memories containing the 
	<a href="icekern.htm">SerialICE Kernel</a> in U5, 
	U6, U7, and U8.
<li>Connect a serial cable from U27 to the 
	<a href="ctypes.htm">SerialICE Controller or Host</a>.
</ul>

<h2><a href="bdmr4011.htm">Nitro II (4011) Evaluation Board</a></h2>
<!--INDEX "Nitro II (4011) Evaluation Board" -->
<ul>
<li>Insert the EPROM memory containing the 
	<a href="icekern.htm">SerialICE Kernel</a> in U4.
<li>Connect a serial cable from J18 to the 
	<a href="ctypes.htm">SerialICE Controller or Host</a>.
</ul>

<h2><a href="bdmr4102.htm">LR4102 TinyRISC Evaluation Board</a></h2>
<!--INDEX "LR4102 TinyRISC Evaluation Board" -->
<!--INDEX "BDMR4102 (4102) Evaluation board" -->
<ul>
<li>Insert the EPROM memory containing the 
	<a href="icekern.htm">SerialICE Kernel</a> in U25.
<li>Connect a serial cable from J9 to the 
	<a href="ctypes.htm">SerialICE Controller or Host</a>.
</ul>


</dl><p><hr>
<b>Navigation:</b> 
<a href="index.htm">Document Home</a> | 
<a href="doctoc.htm">Document Contents</a> | 
<a href="docindex.htm">Document Index</a> <p>