pmtargs.htm

mips架构的bootloader,99左右的版本 但源代码现在没人更新了

		<title>PMON Targets</title>
		<h1 align=center>PMON Targets</h1>

<!--INDEX "PMON Targets" -->

PMON supports any of LSI Logic's Evaluation boards as a Target.  Each
PMON target needs to be equipped with a set of suitably configured PMON
Proms.  This package currently builds for the following boards.<p>


<h2>BDMR400x (4001/2/3) Evaluation Board</h2>
<!--INDEX "BDMR400x (4001/2/3) Evaluation Board" -->

<ul>
<li>Insert the four flash memories containing PMON in U8,
	U19, U29, and U40. Note that this board can be configured for
	big or little <a href="endian.htm">endian</a> byte ordering (J1).
<li>Connect a serial cable from U28 to the 
	<a href="htypes.htm">Host</a>.
</ul>

<h2>BDMR4101 (4101) Evaluation Board</h2>
<!--INDEX "BDMR4101 (4101) Evaluation Board" -->

<ul>
<li>Insert the four flash memories containing PMON in U5,
	U6, U7, and U8. Note that this board can be configured for
	big or little <a href="endian.htm">endian</a> byte ordering (J1).
<li>Connect a serial cable from J28 to the 
	<a href="htypes.htm">Host</a>.
</ul>

<h2>BDMR4102 (4102) Evaluation Board</h2>
<!--INDEX "BDMR4102 (4102) Evaluation Board" -->

<ul>
<li>Insert the EPROM containing PMON in U25.
<li>Connect a serial cable from J10 to the 
	<a href="htypes.htm">Host</a>.
</ul>

<h2>Nitro (4010) Evaluation Board</h2>
<!--INDEX "Nitro (4010) Evaluation Board" -->

<ul>
<li>Insert the flash memory containing PMON in U18.
<li>Connect a serial cable from J18 to the 
	<a href="htypes.htm">Host</a>.
</ul>

<h2>Nitro II (4011) Evaluation Board</h2>
<!--INDEX "Nitro II (4011) Evaluation Board" -->

<ul>
<li>Insert the EPROM containing PMON in U4.
<li>Connect a serial cable from J19 to the 
	<a href="htypes.htm">Host</a>.
</ul>

<h2>SDP1000 (64008) RevA Evaluation Board</h2>
<!--INDEX "SDP1000 (64008) Evaluation Board" -->

<ul>
<li>Insert the two flash memories containing PMON in U42 and U44.
<li>Connect a serial cable from CON9 to the 
	<a href="htypes.htm">Host</a>.
</ul>

<h2>SDP1000 (64108) RevB Evaluation Board</h2>
<!--INDEX "SDP1000 (64108) Evaluation Board" -->

<ul>
<li>Insert the two flash memories containing PMON in U50 and U49.
<li>Connect a serial cable from port1 to the 
	<a href="htypes.htm">Host</a>.
</ul>

<h2>ATMizer-2 RT Platform</h2>
<!--INDEX "ATMizer-2 RT Platform" -->

<ul>
<li>Build two PMON configuartions: one for the ATMizer-2 Host, and one
    for the ATMizer-2 Sar. Insert the two flash memories in the respective
    sockets.
<li>Connect two serial cables to the 
<a href="htypes.htm">Host</a>: one from the Host-board's tty0, and
one from the Sar-board's tty0.
</ul>


</dl><p><hr>
<b>Navigation:</b> 
<a href="index.htm">Document Home</a> | 
<a href="doctoc.htm">Document Contents</a> | 
<a href="docindex.htm">Document Index</a> <p>