terms.htm

mips架构的bootloader,99左右的版本 但源代码现在没人更新了

	<title>Terminal Emulators</title>
	<h1 align=center>Terminal Emulators</h1>

<!--INDEX "Terminal Emulators" -->
<!--INDEX "Assembly-level debug" Symbols "Local variables" Hyperterminal -->
<!--INDEX Terminal Procomm Crosstalk tip -->

A terminal emulator can provide assembly-level debugging. It permits the
user to display/set registers and memory, and to single step and set
breakpoints. In this mode you can use global symbols, but you can't
use local variable names. A Terminal Emulator is often used to 
<a href="sendfile.htm">send a file</a> to the Target.<p>

For more program-specific information, please select the appropriate
program below.<p>

<ul>
<li><a href="termhelp.htm">Terminal</a> (Windows 3.x)
<li><a href="htermhlp.htm">Hyperterminal</a> (Windows 95)
<li><a href="xtalk.htm">Crosstalk</a> (MSDOS, Windows 3.x, Windows 95)
<li>Procomm (MSDOS, Windows 3.x, Windows 95)
<li><a href="tiphelp.htm">tip</a> (UNIX)
</ul>

Note that the <a href="mondef.htm">Monitor</a> does not require any
specific type of Terminal Emulation, but vt100 is always a safe choice
if you need to make one.<p>

You should configure the terminal emulator on your Host for 9600 baud,
8 bits data, no parity, 1 stop bit, and whatever communication port you
chose on the back of your Host, turn on the power to your
SerialICE Controller/Target, and you should see a banner that looks something
like this:<p>

<pre>

	IMON version 5.1.0 [EB], LSI LOGIC Corp. Wed Mar 19 13:01:41 1997
	This is free software, and comes with ABSOLUTELY NO WARRANTY.
	You are welcome to redistribute it without restriction.
	NVRAM: Am29F010. Debugger support: CROSSVIEW, DBX. 
	Type 'h' for on-line help. 
	 
	IMON> 
</pre>

If you don't see this display, you might need to use a <a
href="rs232.htm">special cable</a> to satify the requirements of your
host's hardware flow control scheme (even if it has been disabled).<p>

</dl><p><hr>
<b>Navigation:</b> 
<a href="index.htm">Document Home</a> | 
<a href="doctoc.htm">Document Contents</a> | 
<a href="docindex.htm">Document Index</a> <p>