driver_ralink.c

无线网卡驱动程序,RT73_Linux_STA_Drv1.0.3.6.tar

    wpa_driver_ralink_flush_pmkid(drv);
    sleep(1);
    ralink_set_iface_flags(drv, 0);  

	eloop_unregister_read_sock(drv->event_sock);
	close(drv->event_sock);
	close(drv->ioctl_sock);
	free(drv);
}

static void wpa_driver_ralink_scan_timeout(void *eloop_ctx,
					     void *timeout_ctx)
{
	wpa_printf(MSG_DEBUG, "%s", __FUNCTION__);

	wpa_printf(MSG_DEBUG, "Scan timeout - try to get results");
	wpa_supplicant_event(timeout_ctx, EVENT_SCAN_RESULTS, NULL);

	scanning_done = 1;
}

static int wpa_driver_ralink_scan(void *priv, const u8 *ssid,
				    size_t ssid_len)
{
	struct wpa_driver_ralink_data *drv = priv;
	struct iwreq iwr;
	int ret = 0;

    wpa_printf(MSG_DEBUG, "%s", __FUNCTION__);

	if (ssid_len > IW_ESSID_MAX_SIZE) {
		wpa_printf(MSG_DEBUG, "%s: too long SSID (%lu)",
			   __FUNCTION__, (unsigned long) ssid_len);
		return -1;
	}

	memset(&iwr, 0, sizeof(iwr));
	strncpy(iwr.ifr_name, drv->ifname, IFNAMSIZ);

	if (ioctl(drv->ioctl_sock, SIOCSIWSCAN, &iwr) < 0) {
		perror("ioctl[SIOCSIWSCAN]");
		ret = -1;
	}

	/* Not all drivers generate "scan completed" wireless event, so try to
	 * read results after a timeout. */
	eloop_register_timeout(4, 0, wpa_driver_ralink_scan_timeout, drv,
			       drv->ctx);

    scanning_done = 0;

	return ret;
}

static int
wpa_driver_ralink_get_scan_results(void *priv,
				     struct wpa_scan_result *results,
				     size_t max_size)
{
	struct wpa_driver_ralink_data *drv = priv;
	UCHAR *buf = NULL;
	NDIS_802_11_BSSID_LIST_EX *wsr = (NDIS_802_11_BSSID_LIST_EX *) buf;
	NDIS_WLAN_BSSID_EX *wbi;
	struct iwreq iwr;
	int ap_num;
    u8 *pos,*end;
	   
    wpa_printf(MSG_DEBUG, "%s", __FUNCTION__);

	buf = (UCHAR *) malloc(8192);
	if (buf == NULL)
		return -1;

        memset(buf, 0, 8192);

        wsr = (NDIS_802_11_BSSID_LIST_EX *) buf;

	wsr->NumberOfItems = 0;
	strncpy(iwr.ifr_name, drv->ifname, IFNAMSIZ);
	iwr.u.data.pointer = (caddr_t) buf;
	iwr.u.data.flags = OID_802_11_BSSID_LIST;

    if (ioctl(drv->ioctl_sock, RT_PRIV_IOCTL, &iwr) < 0) {
		free(buf);
		return -1;
	}

    memset(results, 0, max_size * sizeof(struct wpa_scan_result));

    for (ap_num = 0, wbi = wsr->Bssid; ap_num < wsr->NumberOfItems; ++ap_num) {
		memcpy(results[ap_num].bssid, &wbi->MacAddress, ETH_ALEN);
		memcpy(results[ap_num].ssid, wbi->Ssid.Ssid, wbi->Ssid.SsidLength);
		results[ap_num].ssid_len = wbi->Ssid.SsidLength;
		results[ap_num].freq = (wbi->Configuration.DSConfig / 1000);

        /* get ie's */
		wpa_hexdump(MSG_DEBUG, "RALINK: AP IEs",
			    (u8 *) wbi + sizeof(*wbi) - 1, wbi->IELength);

            pos = (u8 *) wbi + sizeof(*wbi) - 1;
	    end = (u8 *) wbi + sizeof(*wbi) + wbi->IELength;
	    
	    if (wbi->IELength < sizeof(NDIS_802_11_FIXED_IEs))
		    break;
		   
	    pos += sizeof(NDIS_802_11_FIXED_IEs) - 2;
		memcpy(&results[ap_num].caps, pos, 2);
		pos += 2;
		
	    while (pos + 1 < end && pos + 2 + pos[1] <= end) {
		    u8 ielen = 2 + pos[1];
		    if (ielen > SSID_MAX_WPA_IE_LEN) {
			    pos += ielen;
			    continue;
		    }

		    if (pos[0] == GENERIC_INFO_ELEM && pos[1] >= 4 &&
		        memcmp(pos + 2, "\x00\x50\xf2\x01", 4) == 0) {
			    memcpy(results[ap_num].wpa_ie, pos, ielen);
			    results[ap_num].wpa_ie_len = ielen;
		    } else if (pos[0] == RSN_INFO_ELEM) {
			    memcpy(results[ap_num].rsn_ie, pos, ielen);
			    results[ap_num].rsn_ie_len = ielen;
		    }
		    pos += ielen;
	   }

	   wbi = (NDIS_WLAN_BSSID_EX *) ((u8 *) wbi + wbi->Length);
    }

	free(buf);
	return ap_num;
}

static int ralink_set_auth_mode(struct wpa_driver_ralink_data *drv, NDIS_802_11_AUTHENTICATION_MODE mode)
{
	NDIS_802_11_AUTHENTICATION_MODE auth_mode = mode;

    wpa_printf(MSG_DEBUG, "%s", __FUNCTION__);

	if (ralink_set_oid(drv, OID_802_11_AUTHENTICATION_MODE,
			 (char *) &auth_mode, sizeof(auth_mode)) < 0) {
		wpa_printf(MSG_DEBUG, "RALINK: Failed to set "
			   "OID_802_11_AUTHENTICATION_MODE (%d)",
			   (int) auth_mode);
		return -1;
	}
	return 0;
}

static int wpa_driver_ralink_remove_key(struct wpa_driver_ralink_data *drv,
				      int key_idx, const u8 *addr,
				      const u8 *bssid, int pairwise)
{
	NDIS_802_11_REMOVE_KEY rkey;
	NDIS_802_11_KEY_INDEX index;
	int res, res2;

    wpa_printf(MSG_DEBUG, "%s", __FUNCTION__);

	memset(&rkey, 0, sizeof(rkey));

	rkey.Length = sizeof(rkey);
	rkey.KeyIndex = key_idx;
	if (pairwise)
		rkey.KeyIndex |= 1 << 30;
	memcpy(rkey.BSSID, bssid, ETH_ALEN);

	res = ralink_set_oid(drv, OID_802_11_REMOVE_KEY, (char *) &rkey,
			   sizeof(rkey));

//AlbertY@20060210 removed it	
	if(0)//if (!pairwise) 
	{
		res2 = ralink_set_oid(drv, OID_802_11_REMOVE_WEP,
				    (char *) &index, sizeof(index));
	} else
		res2 = 0;

	if (res < 0 && res2 < 0)
		return res;
	return 0;
}

static int wpa_driver_ralink_add_wep(struct wpa_driver_ralink_data *drv,
				   int pairwise, int key_idx, int set_tx,
				   const u8 *key, size_t key_len)
{
	NDIS_802_11_WEP *wep;
	size_t len;
	int res;

    wpa_printf(MSG_DEBUG, "%s", __FUNCTION__);

	len = 12 + key_len;
	wep = malloc(len);
	if (wep == NULL)
		return -1;
	memset(wep, 0, len);
	wep->Length = len;
	wep->KeyIndex = key_idx;
	if (set_tx)
		wep->KeyIndex |= 1 << 31;
#if 0 /* Setting bit30 does not seem to work with some NDIS drivers */
	if (pairwise)
		wep->KeyIndex |= 1 << 30;
#endif
	wep->KeyLength = key_len;
	memcpy(wep->KeyMaterial, key, key_len);

	wpa_hexdump_key(MSG_MSGDUMP, "RALINK: OID_802_11_ADD_WEP",
			(char *) wep, len);
	res = ralink_set_oid(drv, OID_802_11_ADD_WEP, (char *) wep, len);

	free(wep);

	return res;
}

static int wpa_driver_ralink_set_key(void *priv, wpa_alg alg, const u8 *addr,
				   int key_idx, int set_tx,
				   const u8 *seq, size_t seq_len,
				   const u8 *key, size_t key_len)
{
	struct wpa_driver_ralink_data *drv = priv;
	size_t len;
	NDIS_802_11_KEY *nkey;
	int i, res, pairwise;
	u8 bssid[ETH_ALEN];

    wpa_printf(MSG_DEBUG, "%s", __FUNCTION__);

	if (addr == NULL || memcmp(addr, "\xff\xff\xff\xff\xff\xff",
				   ETH_ALEN) == 0) {
		/* Group Key */
		pairwise = 0;
		wpa_driver_ralink_get_bssid(drv, bssid);
	} else {
		/* Pairwise Key */
		pairwise = 1;
		memcpy(bssid, addr, ETH_ALEN);
	}

	if (alg == WPA_ALG_NONE || key_len == 0) {
		return wpa_driver_ralink_remove_key(drv, key_idx, addr, bssid,
						  pairwise);
	}

	if (alg == WPA_ALG_WEP) {
		return wpa_driver_ralink_add_wep(drv, pairwise, key_idx, set_tx,
					       key, key_len);
	}

	len = 12 + 6 + 6 + 8 + key_len;

	nkey = malloc(len);
	if (nkey == NULL)
		return -1;
	memset(nkey, 0, len);

	nkey->Length = len;
	nkey->KeyIndex = key_idx;
	if (set_tx)
		nkey->KeyIndex |= 1 << 31;
	if (pairwise)
		nkey->KeyIndex |= 1 << 30;
	if (seq && seq_len)
		nkey->KeyIndex |= 1 << 29;
	nkey->KeyLength = key_len;
	memcpy(nkey->BSSID, bssid, ETH_ALEN);
	if (seq && seq_len) {
		for (i = 0; i < seq_len; i++)
			nkey->KeyRSC |= seq[i] << (i * 8);
	}
	if (alg == WPA_ALG_TKIP && key_len == 32) {
		memcpy(nkey->KeyMaterial, key, 16);
		memcpy(nkey->KeyMaterial + 16, key + 24, 8);
		memcpy(nkey->KeyMaterial + 24, key + 16, 8);
	} else {
		memcpy(nkey->KeyMaterial, key, key_len);
	}

	wpa_hexdump_key(MSG_MSGDUMP, "RALINK: OID_802_11_ADD_KEY",
			(char *) nkey, len);
	res = ralink_set_oid(drv, OID_802_11_ADD_KEY, (char *) nkey, len);
	free(nkey);

	return res;
}

static int wpa_driver_ralink_disassociate(void *priv, const u8 *addr,
					int reason_code)
{
	struct wpa_driver_ralink_data *drv = priv;

	wpa_printf(MSG_DEBUG, "%s", __FUNCTION__);
	if (ralink_set_oid(drv, OID_802_11_DISASSOCIATE,
			 "    ", 4) < 0) {
		wpa_printf(MSG_DEBUG, "RALINK: Failed to set "
			   "OID_802_11_DISASSOCIATE");
	}

       return 0;
}

static int wpa_driver_ralink_deauthenticate(void *priv, const u8 *addr,
					  int reason_code)
{
	wpa_printf(MSG_DEBUG, "%s", __FUNCTION__);
	return wpa_driver_ralink_disassociate(priv, addr, reason_code);
}

static int
wpa_driver_ralink_associate(void *priv,
			  struct wpa_driver_associate_params *params)
{
	struct wpa_driver_ralink_data *drv = priv;
	
	NDIS_802_11_NETWORK_INFRASTRUCTURE mode;
	NDIS_802_11_AUTHENTICATION_MODE auth_mode;
	NDIS_802_11_WEP_STATUS encr;
	BOOLEAN		ieee8021xMode;

    wpa_printf(MSG_DEBUG, "%s", __FUNCTION__);

	if (params->mode == IEEE80211_MODE_IBSS)
		mode = Ndis802_11IBSS;
	else
		mode = Ndis802_11Infrastructure;
	if (ralink_set_oid(drv, OID_802_11_INFRASTRUCTURE_MODE,
			 (char *) &mode, sizeof(mode)) < 0) {
		wpa_printf(MSG_DEBUG, "RALINK: Failed to set "
			   "OID_802_11_INFRASTRUCTURE_MODE (%d)",
			   (int) mode);
		/* Try to continue anyway */
	}

	if (params->wpa_ie == NULL || params->wpa_ie_len == 0) {
		if (params->auth_alg & AUTH_ALG_SHARED_KEY) {
			if (params->auth_alg & AUTH_ALG_OPEN_SYSTEM)
				auth_mode = Ndis802_11AuthModeAutoSwitch;
			else
				auth_mode = Ndis802_11AuthModeShared;
		} else
			auth_mode = Ndis802_11AuthModeOpen;
	} else if (params->wpa_ie[0] == RSN_INFO_ELEM) {
		if (params->key_mgmt_suite == KEY_MGMT_PSK)
			auth_mode = Ndis802_11AuthModeWPA2PSK;
		else
			auth_mode = Ndis802_11AuthModeWPA2;
	} else {
		if (params->key_mgmt_suite == KEY_MGMT_WPA_NONE)
			auth_mode = Ndis802_11AuthModeWPANone;
		else if (params->key_mgmt_suite == KEY_MGMT_PSK)
			auth_mode = Ndis802_11AuthModeWPAPSK;
		else
			auth_mode = Ndis802_11AuthModeWPA;
	}

	switch (params->pairwise_suite) {
	case CIPHER_CCMP:
		encr = Ndis802_11Encryption3Enabled;
		break;
	case CIPHER_TKIP:
		encr = Ndis802_11Encryption2Enabled;
		break;
	case CIPHER_WEP40:
	case CIPHER_WEP104:
		encr = Ndis802_11Encryption1Enabled;
		break;
	case CIPHER_NONE:
		if (params->group_suite == CIPHER_CCMP)
			encr = Ndis802_11Encryption3Enabled;
		else if (params->group_suite == CIPHER_TKIP)
			encr = Ndis802_11Encryption2Enabled;
        else
            encr = Ndis802_11EncryptionDisabled;
		break;
	default:
		encr = Ndis802_11EncryptionDisabled;
	};
       
	ralink_set_auth_mode(drv, auth_mode);

	// notify driver that IEEE8021x mode is enabled
	if(params->key_mgmt_suite == KEY_MGMT_802_1X_NO_WPA)
		ieee8021xMode = TRUE;
	else
		ieee8021xMode = FALSE;	

	if (ralink_set_oid(drv, OID_802_11_SET_IEEE8021X, (char *) &ieee8021xMode, sizeof(BOOLEAN)) < 0)
	{
		wpa_printf(MSG_DEBUG, "RALINK: Failed to set "
			   "OID_802_11_SET_IEEE8021X(%d)",
			   (int) ieee8021xMode);	
	}

	if (ralink_set_oid(drv, OID_802_11_WEP_STATUS,
			 (char *) &encr, sizeof(encr)) < 0) {
		wpa_printf(MSG_DEBUG, "RALINK: Failed to set "
			   "OID_802_11_WEP_STATUS(%d)",
			   (int) encr);
	}

	return wpa_driver_ralink_set_ssid(drv, params->ssid, params->ssid_len);
}

const struct wpa_driver_ops wpa_driver_ralink_ops = {
	.name = "ralink",
	.desc = "Ralink rt73 driver",
	.get_bssid = wpa_driver_ralink_get_bssid,
	.get_ssid = wpa_driver_ralink_get_ssid,
	.set_key = wpa_driver_ralink_set_key,
	.init = wpa_driver_ralink_init,
	.deinit = wpa_driver_ralink_deinit,
	.scan = wpa_driver_ralink_scan,
	.get_scan_results = wpa_driver_ralink_get_scan_results,
	.deauthenticate = wpa_driver_ralink_deauthenticate,
	.disassociate = wpa_driver_ralink_disassociate,
	.associate = wpa_driver_ralink_associate,
	.add_pmkid = wpa_driver_ralink_add_pmkid,
	.remove_pmkid = wpa_driver_ralink_remove_pmkid,
	.flush_pmkid = wpa_driver_ralink_flush_pmkid,
};