📄 dec.rpt
字号:
Project Information c:\documents and settings\dec.rpt
MAX+plus II Compiler Report File
Version 10.2 07/10/2002
Compiled: 12/15/2006 10:53:14
Copyright (C) 1988-2002 Altera Corporation
Any megafunction design, and related net list (encrypted or decrypted),
support information, device programming or simulation file, and any other
associated documentation or information provided by Altera or a partner
under Altera's Megafunction Partnership Program may be used only to
program PLD devices (but not masked PLD devices) from Altera. Any other
use of such megafunction design, net list, support information, device
programming or simulation file, or any other related documentation or
information is prohibited for any other purpose, including, but not
limited to modification, reverse engineering, de-compiling, or use with
any other silicon devices, unless such use is explicitly licensed under
a separate agreement with Altera or a megafunction partner. Title to
the intellectual property, including patents, copyrights, trademarks,
trade secrets, or maskworks, embodied in any such megafunction design,
net list, support information, device programming or simulation file, or
any other related documentation or information provided by Altera or a
megafunction partner, remains with Altera, the megafunction partner, or
their respective licensors. No other licenses, including any licenses
needed under any third party's intellectual property, are provided herein.
***** Project compilation was successful
DEC
** DEVICE SUMMARY **
Chip/ Input Output Bidir Shareable
POF Device Pins Pins Pins LCs Expanders % Utilized
dec EPM7032LC44-6 4 8 0 8 0 25 %
User Pins: 4 8 0
Project Information c:\documents and settings\dec.rpt
** PROJECT COMPILATION MESSAGES **
Warning: Line 14: File c:\documents and settings\dec.vhd: Found multiple assignments to the same signal or signal bit "y7" in a Process Statement -- only the last assignment will take effect
Warning: Line 14: File c:\documents and settings\dec.vhd: Found multiple assignments to the same signal or signal bit "y6" in a Process Statement -- only the last assignment will take effect
Warning: Line 14: File c:\documents and settings\dec.vhd: Found multiple assignments to the same signal or signal bit "y5" in a Process Statement -- only the last assignment will take effect
Warning: Line 14: File c:\documents and settings\dec.vhd: Found multiple assignments to the same signal or signal bit "y4" in a Process Statement -- only the last assignment will take effect
Warning: Line 14: File c:\documents and settings\dec.vhd: Found multiple assignments to the same signal or signal bit "y3" in a Process Statement -- only the last assignment will take effect
Warning: Line 14: File c:\documents and settings\dec.vhd: Found multiple assignments to the same signal or signal bit "y2" in a Process Statement -- only the last assignment will take effect
Warning: Line 14: File c:\documents and settings\dec.vhd: Found multiple assignments to the same signal or signal bit "y1" in a Process Statement -- only the last assignment will take effect
Warning: Line 14: File c:\documents and settings\dec.vhd: Found multiple assignments to the same signal or signal bit "y0" in a Process Statement -- only the last assignment will take effect
Device-Specific Information: c:\documents and settings\dec.rpt
dec
***** Logic for device 'dec' compiled without errors.
Device: EPM7032LC44-6
Device Options:
Turbo Bit = ON
Security Bit = OFF
s s
e e V G G G G G
l l e C N N N N N y y
1 0 n C D D D D D 5 6
-----------------------------------_
/ 6 5 4 3 2 1 44 43 42 41 40 |
sel2 | 7 39 | y2
RESERVED | 8 38 | y1
RESERVED | 9 37 | y7
GND | 10 36 | y0
RESERVED | 11 35 | VCC
RESERVED | 12 EPM7032LC44-6 34 | y4
RESERVED | 13 33 | y3
RESERVED | 14 32 | RESERVED
VCC | 15 31 | RESERVED
RESERVED | 16 30 | GND
RESERVED | 17 29 | RESERVED
|_ 18 19 20 21 22 23 24 25 26 27 28 _|
------------------------------------
R R R R G V R R R R R
E E E E N C E E E E E
S S S S D C S S S S S
E E E E E E E E E
R R R R R R R R R
V V V V V V V V V
E E E E E E E E E
D D D D D D D D D
N.C. = No Connect. This pin has no internal connection to the device.
VCC = Dedicated power pin, which MUST be connected to VCC.
GND = Dedicated ground pin or unused dedicated input, which MUST be connected to GND.
RESERVED = Unused I/O pin, which MUST be left unconnected.
Device-Specific Information: c:\documents and settings\dec.rpt
dec
** RESOURCE USAGE **
Shareable External
Logic Array Block Logic Cells I/O Pins Expanders Interconnect
A: LC1 - LC16 0/16( 0%) 4/16( 25%) 0/16( 0%) 0/36( 0%)
B: LC17 - LC32 8/16( 50%) 8/16( 50%) 0/16( 0%) 4/36( 11%)
Total dedicated input pins used: 0/4 ( 0%)
Total I/O pins used: 12/32 ( 37%)
Total logic cells used: 8/32 ( 25%)
Total shareable expanders used: 0/32 ( 0%)
Total Turbo logic cells used: 8/32 ( 25%)
Total shareable expanders not available (n/a): 0/32 ( 0%)
Average fan-in: 4.00
Total fan-in: 32
Total input pins required: 4
Total output pins required: 8
Total bidirectional pins required: 0
Total logic cells required: 8
Total flipflops required: 0
Total product terms required: 8
Total logic cells lending parallel expanders: 0
Total shareable expanders in database: 0
Synthesized logic cells: 0/ 32 ( 0%)
Device-Specific Information: c:\documents and settings\dec.rpt
dec
** INPUTS **
Shareable
Expanders Fan-In Fan-Out
Pin LC LAB Primitive Code Total Shared n/a INP FBK OUT FBK Name
4 (1) (A) INPUT 0 0 0 0 0 8 0 en
5 (2) (A) INPUT 0 0 0 0 0 8 0 sel0
6 (3) (A) INPUT 0 0 0 0 0 8 0 sel1
7 (4) (A) INPUT 0 0 0 0 0 8 0 sel2
Code:
s = Synthesized pin or logic cell
t = Turbo logic cell
+ = Synchronous flipflop
! = NOT gate push-back
r = Fitter-inserted logic cell
Device-Specific Information: c:\documents and settings\dec.rpt
dec
** OUTPUTS **
Shareable
Expanders Fan-In Fan-Out
Pin LC LAB Primitive Code Total Shared n/a INP FBK OUT FBK Name
36 22 B OUTPUT t 0 0 0 4 0 0 0 y0
38 20 B OUTPUT t 0 0 0 4 0 0 0 y1
39 19 B OUTPUT t 0 0 0 4 0 0 0 y2
33 24 B OUTPUT t 0 0 0 4 0 0 0 y3
34 23 B OUTPUT t 0 0 0 4 0 0 0 y4
41 17 B OUTPUT t 0 0 0 4 0 0 0 y5
40 18 B OUTPUT t 0 0 0 4 0 0 0 y6
37 21 B OUTPUT t 0 0 0 4 0 0 0 y7
Code:
s = Synthesized pin or logic cell
t = Turbo logic cell
+ = Synchronous flipflop
! = NOT gate push-back
r = Fitter-inserted logic cell
Device-Specific Information: c:\documents and settings\dec.rpt
dec
** LOGIC CELL INTERCONNECTIONS **
Logic Array Block 'B':
Logic cells placed in LAB 'B'
+--------------- LC22 y0
| +------------- LC20 y1
| | +----------- LC19 y2
| | | +--------- LC24 y3
| | | | +------- LC23 y4
| | | | | +----- LC17 y5
| | | | | | +--- LC18 y6
| | | | | | | +- LC21 y7
| | | | | | | |
| | | | | | | | Other LABs fed by signals
| | | | | | | | that feed LAB 'B'
LC | | | | | | | | | A B | Logic cells that feed LAB 'B':
Pin
4 -> * * * * * * * * | - * | <-- en
5 -> * * * * * * * * | - * | <-- sel0
6 -> * * * * * * * * | - * | <-- sel1
7 -> * * * * * * * * | - * | <-- sel2
* = The logic cell or pin is an input to the logic cell (or LAB) through the PIA.
- = The logic cell or pin is not an input to the logic cell (or LAB).
Device-Specific Information: c:\documents and settings\dec.rpt
dec
** EQUATIONS **
en : INPUT;
sel0 : INPUT;
sel1 : INPUT;
sel2 : INPUT;
-- Node name is 'y0'
-- Equation name is 'y0', location is LC022, type is output.
y0 = LCELL( _EQ001 $ VCC);
_EQ001 = en & !sel0 & !sel1 & !sel2;
-- Node name is 'y1'
-- Equation name is 'y1', location is LC020, type is output.
y1 = LCELL( _EQ002 $ VCC);
_EQ002 = en & sel0 & !sel1 & !sel2;
-- Node name is 'y2'
-- Equation name is 'y2', location is LC019, type is output.
y2 = LCELL( _EQ003 $ VCC);
_EQ003 = en & !sel0 & sel1 & !sel2;
-- Node name is 'y3'
-- Equation name is 'y3', location is LC024, type is output.
y3 = LCELL( _EQ004 $ VCC);
_EQ004 = en & sel0 & sel1 & !sel2;
-- Node name is 'y4'
-- Equation name is 'y4', location is LC023, type is output.
y4 = LCELL( _EQ005 $ VCC);
_EQ005 = en & !sel0 & !sel1 & sel2;
-- Node name is 'y5'
-- Equation name is 'y5', location is LC017, type is output.
y5 = LCELL( _EQ006 $ VCC);
_EQ006 = en & sel0 & !sel1 & sel2;
-- Node name is 'y6'
-- Equation name is 'y6', location is LC018, type is output.
y6 = LCELL( _EQ007 $ VCC);
_EQ007 = en & !sel0 & sel1 & sel2;
-- Node name is 'y7'
-- Equation name is 'y7', location is LC021, type is output.
y7 = LCELL( _EQ008 $ VCC);
_EQ008 = en & sel0 & sel1 & sel2;
-- Shareable expanders that are duplicated in multiple LABs:
-- (none)
Project Information c:\documents and settings\dec.rpt
** COMPILATION SETTINGS & TIMES **
Processing Menu Commands
------------------------
Design Doctor = off
Logic Synthesis:
Synthesis Type Used = Standard
Default Synthesis Style = NORMAL
Logic option settings in 'NORMAL' style for 'MAX7000' family
DECOMPOSE_GATES = on
DUPLICATE_LOGIC_EXTRACTION = on
MINIMIZATION = full
MULTI_LEVEL_FACTORING = on
NOT_GATE_PUSH_BACK = on
PARALLEL_EXPANDERS = off
REDUCE_LOGIC = on
REFACTORIZATION = on
REGISTER_OPTIMIZATION = on
RESYNTHESIZE_NETWORK = on
SLOW_SLEW_RATE = off
SOFT_BUFFER_INSERTION = on
SUBFACTOR_EXTRACTION = on
TURBO_BIT = on
XOR_SYNTHESIS = on
IGNORE_SOFT_BUFFERS = off
USE_LPM_FOR_AHDL_OPERATORS = off
Other logic synthesis settings:
Automatic Global Clock = on
Automatic Global Clear = on
Automatic Global Preset = on
Automatic Global Output Enable = on
Automatic Fast I/O = off
Automatic Register Packing = off
Automatic Open-Drain Pins = on
Automatic Implement in EAB = off
One-Hot State Machine Encoding = off
Optimize = 5
Default Timing Specifications: None
Cut All Bidir Feedback Timing Paths = on
Cut All Clear & Preset Timing Paths = on
Ignore Timing Assignments = off
Functional SNF Extractor = off
Linked SNF Extractor = off
Timing SNF Extractor = on
Optimize Timing SNF = off
Generate AHDL TDO File = off
Fitter Settings = NORMAL
Smart Recompile = off
Total Recompile = off
Interfaces Menu Commands
------------------------
EDIF Netlist Writer = off
Verilog Netlist Writer = off
VHDL Netlist Writer = off
Compilation Times
-----------------
Compiler Netlist Extractor 00:00:00
Database Builder 00:00:00
Logic Synthesizer 00:00:00
Partitioner 00:00:00
Fitter 00:00:00
Timing SNF Extractor 00:00:00
Assembler 00:00:00
-------------------------- --------
Total Time 00:00:00
Memory Allocated
-----------------
Peak memory allocated during compilation = 3,351K
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -