⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 project.map

📁 upsd34xx系列单片机keil环境中的开发例程
💻 MAP
字号:
**********************************************************************
                  PSDsoft Express Version 8.30
           Output of PSD Fitter - Memory Map Report
**********************************************************************
PROJECT    : project                                  DATE : 02/23/2005
DEVICE     : uPSD3434E                                TIME : 15:38:11
**********************************************************************

==== Device Configuration ====

Data Bus Width                                                    : 8 bit
Security Protection                                               : OFF

Main PSD flash memory will reside in this space at power-up       : Program space
Secondary PSD flash memory will reside in this space at power-up  : Data space

Flash Sector 0 is unprotected.
Flash Sector 1 is unprotected.
Flash Sector 2 is unprotected.
Flash Sector 3 is unprotected.
Flash Sector 4 is unprotected.
Flash Sector 5 is unprotected.
Flash Sector 6 is unprotected.
Flash Sector 7 is unprotected.
Flash Boot Sector 0 is unprotected.
Flash Boot Sector 1 is unprotected.
Flash Boot Sector 2 is unprotected.
Flash Boot Sector 3 is unprotected.

==== Memory Map Report ====

Total address field length available 	= 24 bits
Page register length                 	= 8 bits
Natural address field length         	= 16 bits
Bits used for logic                  	= 0 bits
Address Mask                         	= 0x07FFFF

Available field   xxxxxxxxxxxxxxxxxxxxxxxx
Hardware          PPPPPPPPAAAAAAAAAAAAAAAA
Application usage      PPPAAAAAAAAAAAAAAAA

Label        Page Bit     start       end       Mem          comments
y=page(don't care)
fs0          0byyyyyyyy   0x0000      0x7FFF    F            // & !pdn
fs1          0byyyyy000   0x8000      0xFFFF    F            // & !pdn
fs2          0byyyyy001   0x8000      0xFFFF    F            // & !pdn
fs3          0byyyyy010   0x8000      0xFFFF    F            // & !pdn
fs4          0byyyyy011   0x8000      0xFFFF    F            // & !pdn
fs5          0byyyyy100   0x8000      0xFFFF    F            // & !pdn
fs6          0byyyyy101   0x8000      0xFFFF    F            // & !pdn
fs7          0byyyyy110   0x8000      0xFFFF    F            // & !pdn
csboot0      0byyyyyyyy   0x8000      0x9FFF    F            // & !pdn
csboot1      0byyyyyyyy   0xA000      0xBFFF    F            // & !pdn
csboot2      0byyyyyyyy   0xC000      0xDFFF    F            // & !pdn
csboot3      0byyyyyyyy   0xE000      0xFFFF    F            // & !pdn
rs0          0byyyyyyyy   0x0000      0x1FFF    V            // & !pdn
csiop        0byyyyyyyy   0x7F00      0x7FFF    V            // & !pdn
psel0        0byyyyyyyy   0x7E00      0x7EFF    Peripheral   // & !pdn & _psen
LCD_A0                                                       // > 100 address ranges, no address range generated.
LCD_RW                                                       // > 100 address ranges, no address range generated.
LCD_E1       0byyyyyyyy   0x7E00      0x7E03    Peripheral   // & !_rd
             0byyyyyyyy   0x7E00      0x7E03    Peripheral   // & !_wr
LCD_E2       0byyyyyyyy   0x7E04      0x7E07    Peripheral   // & !_rd
             0byyyyyyyy   0x7E04      0x7E07    Peripheral   // & !_wr

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -