vartab.h

基于CoDeSys的筑路铣刨机,由CoDeSys2.3开发,属于工程机械类自动控制程序.

/*******************************************************/
/*      This file is automatically generated           */
/*        !!! DO NOT MODIFY THIS FILE !!!              */
/*        All changes will be overwritten              */
/*******************************************************/

/* Variable table imported from text1.var */
#define I_Datum                                  65534
#define I_Laufzeit                               65531
#define I_Priority                               65528
#define I_Sprache                                65530
#define I_Uhrzeit                                65533
#define I_Wochentag                              65532
#define alarm                                    12
#define decel_set                                51
#define decel_start_value                        52
#define deep_left                                10
#define deep_right                               11
#define deep_set_left                            32
#define deep_set_right                           33
#define engine_oil                               22
#define engine_speed                             18
#define engine_tem                               20
#define hang_up                                  40
#define height_adjust_left                       43
#define height_adjust_right                      44
#define left_deep_set                            16
#define left_distaff                             41
#define left_fall                                35
#define left_right_fall                          39
#define left_right_rise                          38
#define left_rise                                34
#define left_zero                                13
#define m_engine_oil                             23
#define m_engine_speed                           19
#define m_engine_tem                             21
#define m_oil_press                              25
#define manual_speed                             53
#define memory_left                              27
#define memory_right                             28
#define oil_press                                24
#define password                                 26
#define password1                                29
#define password2                                30
#define password3                                31
#define piece_left                               7
#define piece_right                              8
#define pwm_left_fall                            47
#define pwm_left_rise                            46
#define pwm_right_fall                           49
#define pwm_right_rise                           48
#define right                                    14
#define right_deep_set                           17
#define right_distaff                            42
#define right_fall                               37
#define right_rise                               36
#define right_zero                               15
#define set_dead                                 50
#define state                                    9
#define unload_valve                             45
#define voltage                                  54

/* External Variables imported from <projectname>.var */
/*  !!! valid only if shown in the current page !!!   */

/* Virtual key codes for device imported from devices.dat */
#define VK_F2                                    2
#define VK_F3                                    3
#define VK_F4                                    4
#define VK_POTI_CLOCKWISE                        6
#define VK_POTI_COUNTERCLOCKWISE                 5
#define VK_POTI_PRESS                            7

/* Virtual page numbers imported from project file */
#define CP_P_0000                                0
#define CP_P_0001                                1
#define CP_P_0002                                2
#define CP_P_0003                                3
#define CP_P_0004                                4
#define CP_P_0005                                5
#define CP_P_0006                                6
#define CP_P_0007                                7
#define CP_P_0008                                8
#define CP_P_0009                                9
#define CP_P_0010                                10
#define CP_P_0011                                11
#define CP_P_0015                                15

/* Virtual message numbers imported from project file */