aclocal.m4

Gqview,Linux下基于GTK+库写成的轻量级而能丰富的图像浏览程序。

  do
      case "$module" in
         gthread) 
             pkg_config_args="$pkg_config_args gthread-2.0"
         ;;
      esac
  done

  no_gtk=""

  AC_PATH_PROG(PKG_CONFIG, pkg-config, no)

  if test x$PKG_CONFIG != xno ; then
    if pkg-config --atleast-pkgconfig-version 0.7 ; then
      :
    else
      echo "*** pkg-config too old; version 0.7 or better required."
      no_gtk=yes
      PKG_CONFIG=no
    fi
  else
    no_gtk=yes
  fi

  min_gtk_version=ifelse([$1], ,2.0.0,$1)
  AC_MSG_CHECKING(for GTK+ - version >= $min_gtk_version)

  if test x$PKG_CONFIG != xno ; then
    ## don't try to run the test against uninstalled libtool libs
    if $PKG_CONFIG --uninstalled $pkg_config_args; then
	  echo "Will use uninstalled version of GTK+ found in PKG_CONFIG_PATH"
	  enable_gtktest=no
    fi

    if $PKG_CONFIG --atleast-version $min_gtk_version $pkg_config_args; then
	  :
    else
	  no_gtk=yes
    fi
  fi

  if test x"$no_gtk" = x ; then
    GTK_CFLAGS=`$PKG_CONFIG $pkg_config_args --cflags`
    GTK_LIBS=`$PKG_CONFIG $pkg_config_args --libs`
    gtk_config_major_version=`$PKG_CONFIG --modversion gtk+-2.0 | \
           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
    gtk_config_minor_version=`$PKG_CONFIG --modversion gtk+-2.0 | \
           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
    gtk_config_micro_version=`$PKG_CONFIG --modversion gtk+-2.0 | \
           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
    if test "x$enable_gtktest" = "xyes" ; then
      ac_save_CFLAGS="$CFLAGS"
      ac_save_LIBS="$LIBS"
      CFLAGS="$CFLAGS $GTK_CFLAGS"
      LIBS="$GTK_LIBS $LIBS"
dnl
dnl Now check if the installed GTK+ is sufficiently new. (Also sanity
dnl checks the results of pkg-config to some extent)
dnl
      rm -f conf.gtktest
      AC_TRY_RUN([
#include <gtk/gtk.h>
#include <stdio.h>
#include <stdlib.h>

int 
main ()
{
  int major, minor, micro;
  char *tmp_version;

  system ("touch conf.gtktest");

  /* HP/UX 9 (%@#!) writes to sscanf strings */
  tmp_version = g_strdup("$min_gtk_version");
  if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, &micro) != 3) {
     printf("%s, bad version string\n", "$min_gtk_version");
     exit(1);
   }

  if ((gtk_major_version != $gtk_config_major_version) ||
      (gtk_minor_version != $gtk_config_minor_version) ||
      (gtk_micro_version != $gtk_config_micro_version))
    {
      printf("\n*** 'pkg-config --modversion gtk+-2.0' returned %d.%d.%d, but GTK+ (%d.%d.%d)\n", 
             $gtk_config_major_version, $gtk_config_minor_version, $gtk_config_micro_version,
             gtk_major_version, gtk_minor_version, gtk_micro_version);
      printf ("*** was found! If pkg-config was correct, then it is best\n");
      printf ("*** to remove the old version of GTK+. You may also be able to fix the error\n");
      printf("*** by modifying your LD_LIBRARY_PATH enviroment variable, or by editing\n");
      printf("*** /etc/ld.so.conf. Make sure you have run ldconfig if that is\n");
      printf("*** required on your system.\n");
      printf("*** If pkg-config was wrong, set the environment variable PKG_CONFIG_PATH\n");
      printf("*** to point to the correct configuration files\n");
    } 
  else if ((gtk_major_version != GTK_MAJOR_VERSION) ||
	   (gtk_minor_version != GTK_MINOR_VERSION) ||
           (gtk_micro_version != GTK_MICRO_VERSION))
    {
      printf("*** GTK+ header files (version %d.%d.%d) do not match\n",
	     GTK_MAJOR_VERSION, GTK_MINOR_VERSION, GTK_MICRO_VERSION);
      printf("*** library (version %d.%d.%d)\n",
	     gtk_major_version, gtk_minor_version, gtk_micro_version);
    }
  else
    {
      if ((gtk_major_version > major) ||
        ((gtk_major_version == major) && (gtk_minor_version > minor)) ||
        ((gtk_major_version == major) && (gtk_minor_version == minor) && (gtk_micro_version >= micro)))
      {
        return 0;
       }
     else
      {
        printf("\n*** An old version of GTK+ (%d.%d.%d) was found.\n",
               gtk_major_version, gtk_minor_version, gtk_micro_version);
        printf("*** You need a version of GTK+ newer than %d.%d.%d. The latest version of\n",
	       major, minor, micro);
        printf("*** GTK+ is always available from ftp://ftp.gtk.org.\n");
        printf("***\n");
        printf("*** If you have already installed a sufficiently new version, this error\n");
        printf("*** probably means that the wrong copy of the pkg-config shell script is\n");
        printf("*** being found. The easiest way to fix this is to remove the old version\n");
        printf("*** of GTK+, but you can also set the PKG_CONFIG environment to point to the\n");
        printf("*** correct copy of pkg-config. (In this case, you will have to\n");
        printf("*** modify your LD_LIBRARY_PATH enviroment variable, or edit /etc/ld.so.conf\n");
        printf("*** so that the correct libraries are found at run-time))\n");
      }
    }
  return 1;
}
],, no_gtk=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"])
       CFLAGS="$ac_save_CFLAGS"
       LIBS="$ac_save_LIBS"
     fi
  fi
  if test "x$no_gtk" = x ; then
     AC_MSG_RESULT(yes (version $gtk_config_major_version.$gtk_config_minor_version.$gtk_config_micro_version))
     ifelse([$2], , :, [$2])     
  else
     AC_MSG_RESULT(no)
     if test "$PKG_CONFIG" = "no" ; then
       echo "*** A new enough version of pkg-config was not found."
       echo "*** See http://pkgconfig.sourceforge.net"
     else
       if test -f conf.gtktest ; then
        :
       else
          echo "*** Could not run GTK+ test program, checking why..."
	  ac_save_CFLAGS="$CFLAGS"
	  ac_save_LIBS="$LIBS"
          CFLAGS="$CFLAGS $GTK_CFLAGS"
          LIBS="$LIBS $GTK_LIBS"
          AC_TRY_LINK([
#include <gtk/gtk.h>
#include <stdio.h>
],      [ return ((gtk_major_version) || (gtk_minor_version) || (gtk_micro_version)); ],
        [ echo "*** The test program compiled, but did not run. This usually means"
          echo "*** that the run-time linker is not finding GTK+ or finding the wrong"
          echo "*** version of GTK+. If it is not finding GTK+, you'll need to set your"
          echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
          echo "*** to the installed location  Also, make sure you have run ldconfig if that"
          echo "*** is required on your system"
	  echo "***"
          echo "*** If you have an old version installed, it is best to remove it, although"
          echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH" ],
        [ echo "*** The test program failed to compile or link. See the file config.log for the"
          echo "*** exact error that occured. This usually means GTK+ is incorrectly installed."])
          CFLAGS="$ac_save_CFLAGS"
          LIBS="$ac_save_LIBS"
       fi
     fi
     GTK_CFLAGS=""
     GTK_LIBS=""
     ifelse([$3], , :, [$3])
  fi
  AC_SUBST(GTK_CFLAGS)
  AC_SUBST(GTK_LIBS)
  rm -f conf.gtktest
])

#                                                        -*- Autoconf -*-
# Copyright (C) 2002, 2003  Free Software Foundation, Inc.
# Generated from amversion.in; do not edit by hand.

# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2, or (at your option)
# any later version.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.

# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA

# AM_AUTOMAKE_VERSION(VERSION)
# ----------------------------
# Automake X.Y traces this macro to ensure aclocal.m4 has been
# generated from the m4 files accompanying Automake X.Y.
AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version="1.9"])

# AM_SET_CURRENT_AUTOMAKE_VERSION
# -------------------------------
# Call AM_AUTOMAKE_VERSION so it can be traced.
# This function is AC_REQUIREd by AC_INIT_AUTOMAKE.
AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
	 [AM_AUTOMAKE_VERSION([1.9.2])])

# AM_AUX_DIR_EXPAND

# Copyright (C) 2001, 2003 Free Software Foundation, Inc.

# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2, or (at your option)
# any later version.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.

# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
# 02111-1307, USA.

# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
# $ac_aux_dir to `$srcdir/foo'.  In other projects, it is set to
# `$srcdir', `$srcdir/..', or `$srcdir/../..'.
#
# Of course, Automake must honor this variable whenever it calls a
# tool from the auxiliary directory.  The problem is that $srcdir (and
# therefore $ac_aux_dir as well) can be either absolute or relative,
# depending on how configure is run.  This is pretty annoying, since
# it makes $ac_aux_dir quite unusable in subdirectories: in the top
# source directory, any form will work fine, but in subdirectories a
# relative path needs to be adjusted first.
#
# $ac_aux_dir/missing
#    fails when called from a subdirectory if $ac_aux_dir is relative
# $top_srcdir/$ac_aux_dir/missing
#    fails if $ac_aux_dir is absolute,
#    fails when called from a subdirectory in a VPATH build with
#          a relative $ac_aux_dir
#
# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
# are both prefixed by $srcdir.  In an in-source build this is usually
# harmless because $srcdir is `.', but things will broke when you
# start a VPATH build or use an absolute $srcdir.
#
# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
# iff we strip the leading $srcdir from $ac_aux_dir.  That would be:
#   am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
# and then we would define $MISSING as
#   MISSING="\${SHELL} $am_aux_dir/missing"
# This will work as long as MISSING is not called from configure, because
# unfortunately $(top_srcdir) has no meaning in configure.
# However there are other variables, like CC, which are often used in
# configure, and could therefore not use this "fixed" $ac_aux_dir.
#
# Another solution, used here, is to always expand $ac_aux_dir to an
# absolute PATH.  The drawback is that using absolute paths prevent a
# configured tree to be moved without reconfiguration.

AC_DEFUN([AM_AUX_DIR_EXPAND],
[dnl Rely on autoconf to set up CDPATH properly.
AC_PREREQ([2.50])dnl
# expand $ac_aux_dir to an absolute path
am_aux_dir=`cd $ac_aux_dir && pwd`
])

# AM_CONDITIONAL                                              -*- Autoconf -*-

# Copyright (C) 1997, 2000, 2001, 2003, 2004 Free Software Foundation, Inc.

# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2, or (at your option)
# any later version.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.

# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
# 02111-1307, USA.

# serial 6

# AM_CONDITIONAL(NAME, SHELL-CONDITION)
# -------------------------------------
# Define a conditional.
AC_DEFUN([AM_CONDITIONAL],
[AC_PREREQ(2.52)dnl
 ifelse([$1], [TRUE],  [AC_FATAL([$0: invalid condition: $1])],
	[$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
AC_SUBST([$1_TRUE])
AC_SUBST([$1_FALSE])
if $2; then
  $1_TRUE=
  $1_FALSE='#'
else
  $1_TRUE='#'
  $1_FALSE=
fi
AC_CONFIG_COMMANDS_PRE(
[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
  AC_MSG_ERROR([[conditional "$1" was never defined.
Usually this means the macro was only invoked conditionally.]])
fi])])

# serial 7						-*- Autoconf -*-

# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004
# Free Software Foundation, Inc.

# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2, or (at your option)
# any later version.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.

# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
# 02111-1307, USA.


# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
# written in clear, in which case automake, when reading aclocal.m4,
# will think it sees a *use*, and therefore will trigger all it's
# C support machinery.  Also note that it means that autoscan, seeing
# CC etc. in the Makefile, will ask for an AC_PROG_CC use...



# _AM_DEPENDENCIES(NAME)
# ----------------------
# See how the compiler implements dependency checking.
# NAME is "CC", "CXX", "GCJ", or "OBJC".
# We try a few techniques and use that to set a single cache variable.
#
# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular
# dependency, and given that the user is not expected to run this macro,
# just rely on AC_PROG_CC.
AC_DEFUN([_AM_DEPENDENCIES],
[AC_REQUIRE([AM_SET_DEPDIR])dnl
AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
AC_REQUIRE([AM_MAKE_INCLUDE])dnl
AC_REQUIRE([AM_DEP_TRACK])dnl

ifelse([$1], CC,   [depcc="$CC"   am_compiler_list=],
       [$1], CXX,  [depcc="$CXX"  am_compiler_list=],
       [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
       [$1], GCJ,  [depcc="$GCJ"  am_compiler_list='gcc3 gcc'],
                   [depcc="$$1"   am_compiler_list=])

AC_CACHE_CHECK([dependency style of $depcc],
               [am_cv_$1_dependencies_compiler_type],
[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
  # We make a subdir and do the tests there.  Otherwise we can end up
  # making bogus files that we don't know about and never remove.  For
  # instance it was reported that on HP-UX the gcc test will end up
  # making a dummy file named `D' -- because `-MD' means `put the output
  # in D'.
  mkdir conftest.dir
  # Copy depcomp to subdir because otherwise we won't find it if we're
  # using a relative directory.
  cp "$am_depcomp" conftest.dir
  cd conftest.dir
  # We will build objects and dependencies in a subdirectory because
  # it helps to detect inapplicable dependency modes.  For instance
  # both Tru64's cc and ICC support -MD to output dependencies as a
  # side effect of compilation, but ICC will put the dependencies in
  # the current directory while Tru64 will put them in the object
  # directory.
  mkdir sub

  am_cv_$1_dependencies_compiler_type=none
  if test "$am_compiler_list" = ""; then
     am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
  fi
  for depmode in $am_compiler_list; do
    # Setup a source with many dependencies, because some compilers
    # like to wrap large dependency lists on column 80 (with \), and
    # we should not choose a depcomp mode which is confused by this.
    #
    # We need to recreate these files for each test, as the compiler may
    # overwrite some of them when testing with obscure command lines.
    # This happens at least with the AIX C compiler.
    : > sub/conftest.c
    for i in 1 2 3 4 5 6; do
      echo '#include "conftst'$i'.h"' >> sub/conftest.c
      # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
      # Solaris 8's {/usr,}/bin/sh.
      touch sub/conftst$i.h
    done