103113

神经网络昆斯林的新闻组分类2006

Newsgroups: rec.autos
Path: cantaloupe.srv.cs.cmu.edu!das-news.harvard.edu!noc.near.net!howland.reston.ans.net!gatech!concert!decwrl!adobe!usenet
From: [e-mail] (Gordon Hamachi)
Subject: Re: Honda Accord Brake Problem
Message-ID: <[e-mail]>
Sender: [e-mail] (USENET NEWS)
Organization: Adobe Systems Incorporated
References: <[e-mail]>
Date: Fri, 16 Apr 1993 19:54:24 GMT
Lines: 32

Joni Ciarletta writes
> My Honda Accord just hit the magic 100,000 mile mark and now
> all sorts of things are beginning to go bad. The latest problem
> I am experiencing is with my brakes.  They still stop the
> car fine, but once I am stopped completely, my brake pedal
> will sink another 2 or 3 inches all by itself.  If feels really
> strange, and I am worried my brakes will quit working one of
> these days.
> 
> I checked my brake fluid, and the reservoir was full, but the
> fluid itself looked really dirty (like dirty oil).  I called
> my mechanic and he told me I need a new brake master cylinder,
> which will cost me a whopping $250-300.

You are not alone.  My '79 Honda Accord with 110,000 miles on it started  
showing the same behavior.

I replaced the brake master cylinder myself.  It took about an hour and cost  
about $45.  Sure beats paying $300 to have someone else do it!  If I wanted to  
rebuild my own master cylinder instead of putting in a rebuilt one, it would  
have cost only $20 to $30 for the rebuild kit.

The Honda brake master cylinder is easy to get to.  Two bolts attach it to the  
engine compartment.  Two brake lines enter the master cylinder.  The tricky  
part was that the brake lines were stuck tight.  My Craftsmen open end wrench  
rounded off the bolt heads!  I had to use Vise Grips to loosen those suckers.   
Wow!  Best invention since sliced bread.  After that it was very easy.  Bolt  
the new part in place, add new brake fluid, and bleed the brakes.

This is quite easy even for a beginner.  My local auto parts store had a repair  
manual for the Honda Accord; it had detailed diagrams of the master brake  
cylinder and a step-by-step procedure for replacing it.