aardvark.h

电子盘DEMO板程序

/*=========================================================================
| Aardvark Interface Library
|--------------------------------------------------------------------------
| Copyright (c) 2002-2005 Total Phase, Inc.
| All rights reserved.
| www.totalphase.com
|
| Redistribution and use in source and binary forms, with or without
| modification, are permitted provided that the following conditions
| are met:
|
| - Redistributions of source code must retain the above copyright
|   notice, this list of conditions and the following disclaimer.
|
| - Redistributions in binary form must reproduce the above copyright
|   notice, this list of conditions and the following disclaimer in the
|   documentation and/or other materials provided with the distribution.
|
| - Neither the name of Total Phase, Inc. nor the names of its
|   contributors may be used to endorse or promote products derived from
|   this software without specific prior written permission.
|
| THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
| "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
| LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
| FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE
| COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
| INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
| BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
| LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
| CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
| LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
| ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
| POSSIBILITY OF SUCH DAMAGE.
|--------------------------------------------------------------------------
| To access Aardvark devices through the API:
|
| 1) Use the following shared object:
|      aardvark.so      --  Linux shared object
|          or
|      aardvark.dll     --  Windows dynamic link library
|
| 2) Along with one of the following language modules:
|      aardvark.c/h     --  C/C++ API header file and interface module
|      aardvark_py.py   --  Python API
|      aardvark.bas     --  Visual Basic API
 ========================================================================*/

#ifndef __aardvark_h__
#define __aardvark_h__

#ifdef __cplusplus
extern "C" {
#endif

typedef unsigned char  aa_u08;
typedef unsigned short aa_u16;
typedef unsigned int   aa_u32;
typedef signed   char  aa_s08;
typedef signed   short aa_s16;
typedef signed   int   aa_s32;

/* Set the following macro to '1' for debugging */
#define AA_DEBUG 1


/*=========================================================================
| VERSION
 ========================================================================*/
#define AA_HEADER_VERSION  0x030c   /* v3.12 */


/*=========================================================================
| STATUS CODES
 ========================================================================*/
/*
 * All API functions return an integer which is the result of the
 * transaction, or a status code if negative.  The status codes are
 * defined as follows:
 */
enum AA_STATUS {
    AA_OK                        =    0,
    AA_UNABLE_TO_LOAD_LIBRARY    =   -1,
    AA_UNABLE_TO_LOAD_DRIVER     =   -2,
    AA_UNABLE_TO_LOAD_FUNCTION   =   -3,
    AA_INCOMPATIBLE_LIBRARY      =   -4,
    AA_INCOMPATIBLE_DEVICE       =   -5,
    AA_COMMUNICATION_ERROR       =   -6,
    AA_UNABLE_TO_OPEN            =   -7,
    AA_UNABLE_TO_CLOSE           =   -8,
    AA_INVALID_HANDLE            =   -9,
    AA_CONFIG_ERROR              =  -10,
    AA_I2C_NOT_AVAILABLE         = -100,
    AA_I2C_NOT_ENABLED           = -101,
    AA_I2C_READ_ERROR            = -102,
    AA_I2C_WRITE_ERROR           = -103,
    AA_I2C_SLAVE_BAD_CONFIG      = -104,
    AA_I2C_SLAVE_READ_ERROR      = -105,
    AA_I2C_SLAVE_TIMEOUT         = -106,
    AA_I2C_DROPPED_EXCESS_BYTES  = -107,
    AA_I2C_BUS_ALREADY_FREE      = -108,
    AA_SPI_NOT_AVAILABLE         = -200,
    AA_SPI_NOT_ENABLED           = -201,
    AA_SPI_WRITE_ERROR           = -202,
    AA_SPI_SLAVE_READ_ERROR      = -203,
    AA_SPI_SLAVE_TIMEOUT         = -204,
    AA_SPI_DROPPED_EXCESS_BYTES  = -205,
    AA_GPIO_NOT_AVAILABLE        = -400,
    AA_I2C_MONITOR_NOT_AVAILABLE = -500,
    AA_I2C_MONITOR_NOT_ENABLED   = -501
};
#ifndef __cplusplus
typedef enum AA_STATUS AA_STATUS;
#endif


/*=========================================================================
| GENERAL TYPE DEFINITIONS
 ========================================================================*/
/*
 * Aardvark handle
 */
typedef int Aardvark;

/*
 * Aardvark version matrix.
 * 
 * This matrix describes the various version dependencies
 * of Aardvark components.  It can be used to determine
 * which component caused an incompatibility error.
 * 
 * All version numbers are of the format:
 *   (major << 8) | minor
 * 
 * ex. v1.20 would be encoded as:  0x0114
 */
struct AardvarkVersion {
    aa_u16 software;
    aa_u16 firmware;
    aa_u16 hardware;
    aa_u16 sw_req_by_fw;
    aa_u16 fw_req_by_sw;
    aa_u16 api_req_by_sw;
};
#ifndef __cplusplus
typedef struct AardvarkVersion AardvarkVersion;
#endif


/*=========================================================================
| GENERAL API
 ========================================================================*/
/*
 * Get a list of ports to which Aardvark devices are attached.
 * 
 * nelem   = maximum number of elements to return
 * devices = array into which the port numbers are returned
 * 
 * Each element of the array is written with the port number.
 * Devices that are in-use are ORed with AA_PORT_NOT_FREE (0x8000).
 *
 * ex.  devices are attached to ports 0, 1, 2
 *      ports 0 and 2 are available, and port 1 is in-use.
 *      array => 0x0000, 0x8001, 0x0002
 * 
 * If the array is NULL, it is not filled with any values.
 * If there are more devices than the array size, only the
 * first nmemb port numbers will be written into the array.
 * 
 * Returns the number of devices found, regardless of the
 * array size.
 */
#define AA_PORT_NOT_FREE 0x8000
int aa_find_devices (
    int      nelem,
    aa_u16 * devices
);


/*
 * Get a list of ports to which Aardvark devices are attached
 *
 * This function is the same as aa_find_devices() except that
 * it returns the unique IDs of each Aardvark device.  The IDs
 * are guaranteed to be non-zero if valid.
 *
 * The IDs are the unsigned integer representation of the 10-digit
 * serial numbers.
 */
int aa_find_devices_ext (
    int      nelem,
    aa_u16 * devices,
    aa_u32 * unique_ids
);


/*
 * Open the Aardvark port.
 * 
 * The port number is a zero-indexed integer.
 *
 * The port number is the same as that obtained from the
 * aa_find_devices() function above.
 * 
 * Returns an Aardvark handle, which is guaranteed to be
 * greater than zero if it is valid.
 * 
 * This function is recommended for use in simple applications
 * where extended information is not required.  For more complex
 * applications, the use of aa_open_ext() is recommended.
 */
Aardvark aa_open (
    int port_number
);


/*
 * Open the Aardvark port, returning extended information
 * in the supplied structure.  Behavior is otherwise identical
 * to aa_open() above.  If 0 is passed as the pointer to the
 * structure, this function is exactly equivalent to aa_open().
 * 
 * The structure is zeroed before the open is attempted.
 * It is filled with whatever information is available.
 * 
 * For example, if the firmware version is not filled, then
 * the device could not be queried for its version number.
 * 
 * This function is recommended for use in complex applications
 * where extended information is required.  For more simple
 * applications, the use of aa_open() is recommended.
 */
struct AardvarkExt {
    AardvarkVersion version;
    int             features;
};
#ifndef __cplusplus
typedef struct AardvarkExt AardvarkExt;
#endif

Aardvark aa_open_ext (
    int           port_number,
    AardvarkExt * aa_ext
);


/*
 * Close the Aardvark port.
 */
int aa_close (
    Aardvark aardvark
);


/*
 * Return the port for this Aardvark handle.
 * 
 * The port number is a zero-indexed integer.
 */
int aa_port (
    Aardvark aardvark
);


/*
 * Return the device features as a bit-mask of values, or
 * an error code if the handle is not valid.
 */
#define AA_FEATURE_SPI 0x00000001
#define AA_FEATURE_I2C 0x00000002
#define AA_FEATURE_GPIO 0x00000008
#define AA_FEATURE_I2C_MONITOR 0x00000010
int aa_features (
    Aardvark aardvark
);


/*
 * Return the unique ID for this Aardvark adapter.
 * IDs are guaranteed to be non-zero if valid.
 * The ID is the unsigned integer representation of the
 * 10-digit serial number.
 */
aa_u32 aa_unique_id (
    Aardvark aardvark
);


/*
 * Return the status string for the given status code.
 * If the code is not valid or the library function cannot
 * be loaded, return a NULL string.
 */
const char * aa_status_string (
    int status
);


/*
 * Enable logging to a file.  The handle must be standard file
 * descriptor.  In C, a file descriptor can be obtained by using
 * the ANSI C function "open" or by using the function "fileno"
 * on a FILE* stream.  A FILE* stream can be obtained using "fopen"
 * or can correspond to the common "stdout" or "stderr" --
 * available when including stdlib.h
 */
int aa_log (
    Aardvark aardvark,
    int      level,
    int      handle
);


/*
 * Return the version matrix for the device attached to the
 * given handle.  If the handle is 0 or invalid, only the
 * software and required api versions are set.
 */
int aa_version (
    Aardvark          aardvark,
    AardvarkVersion * version
);


/*
 * Configure the device by enabling/disabling I2C, SPI, and
 * GPIO functions.
 */
enum AA_CONFIG {
    AA_CONFIG_GPIO_ONLY = 0x00,
    AA_CONFIG_SPI_GPIO  = 0x01,
    AA_CONFIG_GPIO_I2C  = 0x02,
    AA_CONFIG_SPI_I2C   = 0x03,
    AA_CONFIG_QUERY     = 0x80
};
#ifndef __cplusplus
typedef enum AA_CONFIG AA_CONFIG;
#endif

#define AA_CONFIG_SPI_MASK 0x00000001
#define AA_CONFIG_I2C_MASK 0x00000002
int aa_configure (
    Aardvark  aardvark,
    AA_CONFIG config
);


/*
 * Configure the target power pins.
 * This is only supported on hardware versions >= 2.00
 */
#define AA_TARGET_POWER_NONE 0x00
#define AA_TARGET_POWER_BOTH 0x03
#define AA_TARGET_POWER_QUERY 0x80
int aa_target_power (
    Aardvark aardvark,
    aa_u08   power_mask
);


/*
 * Sleep for the specified number of milliseconds
 * Accuracy depends on the operating system scheduler
 * Returns the number of milliseconds slept
 */
aa_u32 aa_sleep_ms (
    aa_u32 milliseconds
);



/*=========================================================================
| ASYNC MESSAGE POLLING
 ==========================================================================
| Polling function to check if there are any asynchronous
| messages pending for processing. The function takes a timeout
| value in units of milliseconds.  If the timeout is < 0, the
| function will block until data is received.  If the timeout is 0,
| the function will perform a non-blocking chec*/
#define AA_ASYNC_NO_DATA 0x00000000
#define AA_ASYNC_I2C_READ 0x00000001
#define AA_ASYNC_I2C_WRITE 0x00000002
#define AA_ASYNC_SPI 0x00000004
#define AA_ASYNC_I2C_MONITOR 0x00000008
int aa_async_poll (
    Aardvark aardvark,
    int      timeout
);



/*=========================================================================
| I2C API
 ========================================================================*/
/*
 * Free the I2C bus.
 */
int aa_i2c_free_bus (
    Aardvark aardvark
);


/*
 * Set the I2C bit rate in kilohertz.  If a zero is passed as the
 * bitrate, the bitrate is unchanged and the current bitrate is
 * returned.
 */
int aa_i2c_bitrate (
    Aardvark aardvark,
    int      bitrate_khz
);


enum AA_I2C_FLAGS {
    AA_I2C_NO_FLAGS     = 0x00,
    AA_I2C_10_BIT_ADDR  = 0x01,
    AA_I2C_COMBINED_FMT = 0x02,
    AA_I2C_NO_STOP      = 0x04
};
#ifndef __cplusplus
typedef enum AA_I2C_FLAGS AA_I2C_FLAGS;
#endif