makefile.in

来自「这是一个自动生成MAKEFILE的工具。一个很有用的库。在LINUX工程项目里是」· IN 代码 · 共 541 行 · 第 1/2 页

	test "$$dot_seen" = "no" && rev=". $$rev"; \
	target=`echo $@ | sed s/-recursive//`; \
	for subdir in $$rev; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
	done && test -z "$$fail"
tags-recursive:
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
	done

tags: TAGS

ID: $(HEADERS) $(SOURCES) $(LISP)
	list='$(SOURCES) $(HEADERS)'; \
	unique=`for i in $$list; do echo $$i; done | \
	  awk '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	here=`pwd` && cd $(srcdir) \
	  && mkid -f$$here/ID $$unique $(LISP)

TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
	tags=; \
	here=`pwd`; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
   if test "$$subdir" = .; then :; else \
	    test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
   fi; \
	done; \
	list='$(SOURCES) $(HEADERS)'; \
	unique=`for i in $$list; do echo $$i; done | \
	  awk '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $$unique $(LISP) -o $$here/TAGS)

mostlyclean-tags:

clean-tags:

distclean-tags:
	-rm -f TAGS ID

maintainer-clean-tags:

distdir = $(PACKAGE)-$(VERSION)
top_distdir = $(distdir)

# This target untars the dist file and tries a VPATH configuration.  Then
# it guarantees that the distribution is self-contained by making another
# tarfile.
distcheck: dist
	-rm -rf $(distdir)
	GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
	mkdir $(distdir)/=build
	mkdir $(distdir)/=inst
	dc_install_base=`cd $(distdir)/=inst && pwd`; \
	cd $(distdir)/=build \
	  && ../configure --srcdir=.. --prefix=$$dc_install_base \
	  && $(MAKE) $(AM_MAKEFLAGS) \
	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
	  && $(MAKE) $(AM_MAKEFLAGS) check \
	  && $(MAKE) $(AM_MAKEFLAGS) install \
	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
	  && $(MAKE) $(AM_MAKEFLAGS) dist
	-rm -rf $(distdir)
	@banner="$(distdir).tar.gz is ready for distribution"; \
	dashes=`echo "$$banner" | sed s/./=/g`; \
	echo "$$dashes"; \
	echo "$$banner"; \
	echo "$$dashes"
dist: distdir
	-chmod -R a+r $(distdir)
	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
	-rm -rf $(distdir)
dist-all: distdir
	-chmod -R a+r $(distdir)
	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
	-rm -rf $(distdir)
distdir: $(DISTFILES)
	-rm -rf $(distdir)
	mkdir $(distdir)
	-chmod 777 $(distdir)
	@for file in $(DISTFILES); do \
	  d=$(srcdir); \
	  if test -d $$d/$$file; then \
	    cp -pr $$d/$$file $(distdir)/$$file; \
	  else \
	    test -f $(distdir)/$$file \
	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
	    || cp -p $$d/$$file $(distdir)/$$file || :; \
	  fi; \
	done
	for subdir in $(DIST_SUBDIRS); do \
	  if test "$$subdir" = .; then :; else \
	    test -d $(distdir)/$$subdir \
	    || mkdir $(distdir)/$$subdir \
	    || exit 1; \
	    chmod 777 $(distdir)/$$subdir; \
	    (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir=../$(distdir) distdir=../$(distdir)/$$subdir distdir) \
	      || exit 1; \
	  fi; \
	done
info-am:
info: info-recursive
dvi-am:
dvi: dvi-recursive
check-am: all-am
check: check-recursive
installcheck-am:
installcheck: installcheck-recursive
install-exec-am: install-binSCRIPTS
install-exec: install-exec-recursive

install-data-am: install-pkgdataSCRIPTS install-aclocalDATA \
		install-pkgdataDATA
	@$(NORMAL_INSTALL)
	$(MAKE) $(AM_MAKEFLAGS) install-data-hook
install-data: install-data-recursive

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
install: install-recursive
uninstall-am: uninstall-binSCRIPTS uninstall-pkgdataSCRIPTS \
		uninstall-aclocalDATA uninstall-pkgdataDATA \
		uninstall-local
uninstall: uninstall-recursive
all-am: Makefile $(SCRIPTS) $(DATA)
all-redirect: all-recursive
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
installdirs: installdirs-recursive
installdirs-am:
	$(mkinstalldirs)  $(DESTDIR)$(bindir) $(DESTDIR)$(pkgdatadir) \
		$(DESTDIR)$(aclocaldir) $(DESTDIR)$(pkgdatadir)


mostlyclean-generic:

clean-generic:
	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)

distclean-generic:
	-rm -f Makefile $(CONFIG_CLEAN_FILES)
	-rm -f config.cache config.log stamp-h stamp-h[0-9]*

maintainer-clean-generic:
mostlyclean-am:  mostlyclean-tags mostlyclean-generic

mostlyclean: mostlyclean-recursive

clean-am:  clean-tags clean-generic mostlyclean-am

clean: clean-recursive

distclean-am:  distclean-tags distclean-generic clean-am
	-rm -f libtool

distclean: distclean-recursive
	-rm -f config.status

maintainer-clean-am:  maintainer-clean-tags maintainer-clean-generic \
		distclean-am
	@echo "This command is intended for maintainers to use;"
	@echo "it deletes files that may require special tools to rebuild."

maintainer-clean: maintainer-clean-recursive
	-rm -f config.status

.PHONY: uninstall-binSCRIPTS install-binSCRIPTS uninstall-pkgdataSCRIPTS \
install-pkgdataSCRIPTS uninstall-aclocalDATA install-aclocalDATA \
uninstall-pkgdataDATA install-pkgdataDATA install-data-recursive \
uninstall-data-recursive install-exec-recursive \
uninstall-exec-recursive installdirs-recursive uninstalldirs-recursive \
all-recursive check-recursive installcheck-recursive info-recursive \
dvi-recursive mostlyclean-recursive distclean-recursive clean-recursive \
maintainer-clean-recursive tags tags-recursive mostlyclean-tags \
distclean-tags clean-tags maintainer-clean-tags distdir info-am info \
dvi-am dvi check check-am installcheck-am installcheck install-exec-am \
install-exec install-data-am install-data install-am install \
uninstall-local uninstall-am uninstall all-redirect all-am all \
installdirs-am installdirs mostlyclean-generic distclean-generic \
clean-generic maintainer-clean-generic clean mostlyclean distclean \
maintainer-clean


libtool: $(srcdir)/ltmain.sh $(top_builddir)/configure.in
	$(SHELL) $(top_builddir)/config.status --recheck
	chmod +x $@

libtoolize: $(srcdir)/libtoolize.in $(top_builddir)/config.status
	CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) $(top_builddir)/config.status
	chmod +x $@

$(srcdir)/ltmain.sh: $(srcdir)/ltmain.in $(TSDEPS)
	-rm -f ltmain.shT
	date=`$(SHELL) $(srcdir)/mkstamp < $(srcdir)/ChangeLog` && \
	sed -e 's/@''PACKAGE@/@PACKAGE@/' -e 's/@''VERSION@/@VERSION@/' \
	    -e "s%@""TIMESTAMP@%$$date%" $(srcdir)/ltmain.in > ltmain.shT
	mv -f ltmain.shT $@ || \
	(rm -f $@ && cp ltmain.shT $@ && rm -f ltmain.shT)

.PHONY: timestamps update-timestamps
timestamps distdir: update-timestamps
update-timestamps:
	@if (cd $(srcdir) && test -d CVS && \
	    $(CVS) -n update $(TSDEPS_DIST) | grep '^M'); then \
		echo "Cannot make dist before commit"; exit 1; else :; fi

# All our rules should depend on these demo files.
all-recursive: $(srcdir)/libltdl/acinclude.m4 $(ACINCLUDE_M4_LIST)

@srcdir@/libltdl/acinclude.m4: $(srcdir)/libtool.m4 $(srcdir)/ltdl.m4
	-rm -f $@ $@T
	cat $(srcdir)/libtool.m4 $(srcdir)/ltdl.m4 > $@T
	mv $@T $@

@ACINCLUDE_M4_LIST@: $(srcdir)/libtool.m4
	-rm -f $@ $@T
	cat $(srcdir)/libtool.m4 > $@T
	mv $@T $@

.PHONY: configure-subdirs
configure-subdirs distdir: $(DIST_MAKEFILE_LIST)
@DIST_MAKEFILE_LIST@:
	dir=`echo $@ | sed 's,^[^/]*$$,.,;s,/[^/]*$$,,'`; \
	test -d $$dir || mkdir $$dir || exit 1; \
	abs_srcdir=`cd $(top_srcdir) && pwd`; \
	(cd $$dir && $$abs_srcdir/$$dir/configure) || exit 1

# Create and install libltdl
install-data-hook:
	cd libltdl && $(MAKE) local-install-files

# Uninstall libltdl
uninstall-local:
	-rm -rf $(DESTDIR)$(pkgdatadir)/libltdl

################################################################

# Tag before making distribution.  Also, don't make a distribution if
# checks fail.  Also, make sure the NEWS file is up-to-date.
cvs-dist: distcheck
	@if sed '1,2d;3q' $(srcdir)/NEWS | grep -e "$(VERSION)" > /dev/null; then :; else \
	  echo "NEWS not updated; not releasing" 1>&2; \
	  exit 1;				\
	fi
	cd $(srcdir) && \
	 $(CVS) -q tag `echo "release-$(VERSION)" | sed 's/\./-/g'`
	$(MAKE) dist

cvs-diff:
	thisver=`echo "release-$(VERSION)" | sed 's/\./-/g'`; \
	if test -z "$$OLDVERSION"; then \
	  prevno=`echo "$(VERSION)" - 0.01 | bc | sed 's/^\./0./'`; \
	else prevno="$$OLDVERSION"; fi; \
	prevver=release-`echo $$prevno | sed 's/\./-/g'`; \
	$(CVS) -f rdiff -c -r $$prevver -r $$thisver $(PACKAGE) \
	    > $(PACKAGE)-$$prevno-$(VERSION).diff

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: