configure

这是一个自动生成MAKEFILE的工具。一个很有用的库。在LINUX工程项目里是很好的帮手。希望对大家有点帮助。

  fi
fi


am_make=${MAKE-make}
cat > confinc << 'END'
doit:
	@echo done
END
# If we don't find an include directive, just comment out the code.
echo $ac_n "checking for style of include used by $am_make""... $ac_c" 1>&6
echo "configure:1264: checking for style of include used by $am_make" >&5
am__include='#'
am__quote=
_am_result=none
# First try GNU make style include.
echo "include confinc" > confmf
# We grep out `Entering directory' and `Leaving directory'
# messages which can occur if `w' ends up in MAKEFLAGS.
# In particular we don't look at `^make:' because GNU make might
# be invoked under some other name (usually "gmake"), in which
# case it prints its new name instead of `make'.
if test "`$am_make -s -f confmf 2> /dev/null | fgrep -v 'ing directory'`" = "done"; then
   am__include=include
   am__quote=
   _am_result=GNU
fi
# Now try BSD make style include.
if test "$am__include" = "#"; then
   echo '.include "confinc"' > confmf
   if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then
      am__include=.include
      am__quote='"'
      _am_result=BSD
   fi
fi


echo "$ac_t""$_am_result" 1>&6
rm -f confinc confmf


depcc="$CC"   am_compiler_list=

echo $ac_n "checking dependency style of $depcc""... $ac_c" 1>&6
echo "configure:1298: checking dependency style of $depcc" >&5
if eval "test \"`echo '$''{'am_cv_CC_dependencies_compiler_type'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
  # We make a subdir and do the tests there.  Otherwise we can end up
  # making bogus files that we don't know about and never remove.  For
  # instance it was reported that on HP-UX the gcc test will end up
  # making a dummy file named `D' -- because `-MD' means `put the output
  # in D'.
  mkdir conftest.dir
  # Copy depcomp to subdir because otherwise we won't find it if we're
  # using a relative directory.
  cp "$am_depcomp" conftest.dir
  cd conftest.dir

  am_cv_CC_dependencies_compiler_type=none
  if test "$am_compiler_list" = ""; then
     am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
  fi
  for depmode in $am_compiler_list; do
    # We need to recreate these files for each test, as the compiler may
    # overwrite some of them when testing with obscure command lines.
    # This happens at least with the AIX C compiler.
    echo '#include "conftest.h"' > conftest.c
    echo 'int i;' > conftest.h
    echo "${am__include} ${am__quote}conftest.Po${am__quote}" > confmf

    case $depmode in
    nosideeffect)
      # after this tag, mechanisms are not by side-effect, so they'll
      # only be used when explicitly requested
      if test "x$enable_dependency_tracking" = xyes; then
	continue
      else
	break
      fi
      ;;
    none) break ;;
    esac
    # We check with `-c' and `-o' for the sake of the "dashmstdout"
    # mode.  It turns out that the SunPro C++ compiler does not properly
    # handle `-M -o', and we need to detect this.
    if depmode=$depmode \
       source=conftest.c object=conftest.o \
       depfile=conftest.Po tmpdepfile=conftest.TPo \
       $SHELL ./depcomp $depcc -c conftest.c -o conftest.o >/dev/null 2>&1 &&
       grep conftest.h conftest.Po > /dev/null 2>&1 &&
       ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
      am_cv_CC_dependencies_compiler_type=$depmode
      break
    fi
  done

  cd ..
  rm -rf conftest.dir
else
  am_cv_CC_dependencies_compiler_type=none
fi

fi

echo "$ac_t""$am_cv_CC_dependencies_compiler_type" 1>&6
CCDEPMODE="depmode=$am_cv_CC_dependencies_compiler_type"



# Make sure we can run config.sub.
if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
fi

echo $ac_n "checking host system type""... $ac_c" 1>&6
echo "configure:1371: checking host system type" >&5

host_alias=$host
case "$host_alias" in
NONE)
  case $nonopt in
  NONE)
    if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
    else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
    fi ;;
  *) host_alias=$nonopt ;;
  esac ;;
esac

host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
echo "$ac_t""$host" 1>&6

echo $ac_n "checking build system type""... $ac_c" 1>&6
echo "configure:1392: checking build system type" >&5

build_alias=$build
case "$build_alias" in
NONE)
  case $nonopt in
  NONE) build_alias=$host_alias ;;
  *) build_alias=$nonopt ;;
  esac ;;
esac

build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
echo "$ac_t""$build" 1>&6

# Find the correct PATH separator.  Usually this is `:', but
# DJGPP uses `;' like DOS.
if test "X${PATH_SEPARATOR+set}" != Xset; then
  UNAME=${UNAME-`uname 2>/dev/null`}
  case X$UNAME in
    *-DOS) lt_cv_sys_path_separator=';' ;;
    *)     lt_cv_sys_path_separator=':' ;;
  esac
  PATH_SEPARATOR=$lt_cv_sys_path_separator
fi

# Check whether --with-gnu-ld or --without-gnu-ld was given.
if test "${with_gnu_ld+set}" = set; then
  withval="$with_gnu_ld"
  test "$withval" = no || with_gnu_ld=yes
else
  with_gnu_ld=no
fi

ac_prog=ld
if test "$GCC" = yes; then
  # Check if gcc -print-prog-name=ld gives a path.
  echo $ac_n "checking for ld used by GCC""... $ac_c" 1>&6
echo "configure:1432: checking for ld used by GCC" >&5
  case $host in
  *-*-mingw*)
    # gcc leaves a trailing carriage return which upsets mingw
    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
  *)
    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
  esac
  case $ac_prog in
    # Accept absolute paths.
    [\\/]* | [A-Za-z]:[\\/]*)
      re_direlt='/[^/][^/]*/\.\./'
      # Canonicalize the path of ld
      ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
      while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
	ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
      done
      test -z "$LD" && LD="$ac_prog"
      ;;
  "")
    # If it fails, then pretend we aren't using GCC.
    ac_prog=ld
    ;;
  *)
    # If it is relative, then search for the first ld in PATH.
    with_gnu_ld=unknown
    ;;
  esac
elif test "$with_gnu_ld" = yes; then
  echo $ac_n "checking for GNU ld""... $ac_c" 1>&6
echo "configure:1462: checking for GNU ld" >&5
else
  echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6
echo "configure:1465: checking for non-GNU ld" >&5
fi
if eval "test \"`echo '$''{'lt_cv_path_LD'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test -z "$LD"; then
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
  for ac_dir in $PATH; do
    test -z "$ac_dir" && ac_dir=.
    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
      lt_cv_path_LD="$ac_dir/$ac_prog"
      # Check to see if the program is GNU ld.  I'd rather use --version,
      # but apparently some GNU ld's only accept -v.
      # Break only if it was the GNU/non-GNU ld that we prefer.
      if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
	test "$with_gnu_ld" != no && break
      else
	test "$with_gnu_ld" != yes && break
      fi
    fi
  done
  IFS="$ac_save_ifs"
else
  lt_cv_path_LD="$LD" # Let the user override the test with a path.
fi
fi

LD="$lt_cv_path_LD"
if test -n "$LD"; then
  echo "$ac_t""$LD" 1>&6
else
  echo "$ac_t""no" 1>&6
fi
test -z "$LD" && { echo "configure: error: no acceptable ld found in \$PATH" 1>&2; exit 1; }
echo $ac_n "checking if the linker ($LD) is GNU ld""... $ac_c" 1>&6
echo "configure:1500: checking if the linker ($LD) is GNU ld" >&5
if eval "test \"`echo '$''{'lt_cv_prog_gnu_ld'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  # I'd rather use --version here, but apparently some GNU ld's only accept -v.
if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
  lt_cv_prog_gnu_ld=yes
else
  lt_cv_prog_gnu_ld=no
fi
fi

echo "$ac_t""$lt_cv_prog_gnu_ld" 1>&6
with_gnu_ld=$lt_cv_prog_gnu_ld



echo $ac_n "checking for BSD-compatible nm""... $ac_c" 1>&6
echo "configure:1518: checking for BSD-compatible nm" >&5
if eval "test \"`echo '$''{'lt_cv_path_NM'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test -n "$NM"; then
  # Let the user override the test.
  lt_cv_path_NM="$NM"
else
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
  for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
    test -z "$ac_dir" && ac_dir=.
    tmp_nm=$ac_dir/${ac_tool_prefix}nm
    if test -f $tmp_nm || test -f $tmp_nm$ac_exeext ; then
      # Check to see if the nm accepts a BSD-compat flag.
      # Adding the `sed 1q' prevents false positives on HP-UX, which says:
      #   nm: unknown option "B" ignored
      # Tru64's nm complains that /dev/null is an invalid object file
      if ($tmp_nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep '(/dev/null|Invalid file or object type)' >/dev/null; then
	lt_cv_path_NM="$tmp_nm -B"
	break
      elif ($tmp_nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
	lt_cv_path_NM="$tmp_nm -p"
	break
      else
	lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
	continue # so that we can try to find one that supports BSD flags
      fi
    fi
  done
  IFS="$ac_save_ifs"
  test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
fi
fi

NM="$lt_cv_path_NM"
echo "$ac_t""$NM" 1>&6


echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
echo "configure:1557: checking whether ln -s works" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  rm -f conftestdata
if ln -s X conftestdata 2>/dev/null
then
  rm -f conftestdata
  ac_cv_prog_LN_S="ln -s"
else
  ac_cv_prog_LN_S=ln
fi
fi
LN_S="$ac_cv_prog_LN_S"
if test "$ac_cv_prog_LN_S" = "ln -s"; then
  echo "$ac_t""yes" 1>&6
else
  echo "$ac_t""no" 1>&6
fi


# Declare win32 dll support


# Check for dlopen support

echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
echo "configure:1584: checking for Cygwin environment" >&5
if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 1589 "configure"
#include "confdefs.h"

int main() {

#ifndef __CYGWIN__
#define __CYGWIN__ __CYGWIN32__
#endif
return __CYGWIN__;
; return 0; }
EOF
if { (eval echo configure:1600: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
  rm -rf conftest*
  ac_cv_cygwin=yes
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  ac_cv_cygwin=no
fi
rm -f conftest*
rm -f conftest*
fi

echo "$ac_t""$ac_cv_cygwin" 1>&6
CYGWIN=
test "$ac_cv_cygwin" = yes && CYGWIN=yes
echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
echo "configure:1617: checking for mingw32 environment" >&5
if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 1622 "configure"
#include "confdefs.h"

int main() {
return __MINGW32__;
; return 0; }
EOF
if { (eval echo configure:1629: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
  rm -rf conftest*
  ac_cv_mingw32=yes
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  ac_cv_mingw32=no
fi
rm -f conftest*
rm -f conftest*
fi

echo "$ac_t""$ac_cv_mingw32" 1>&6
MINGW32=
test "$ac_cv_mingw32" = yes && MINGW32=yes
echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
echo "configure:1646: checking how to run the C preprocessor" >&5
# On Suns, sometimes $CPP names a directory.
if test -n "$CPP" && test -d "$CPP"; then
  CPP=
fi
if test -z "$CPP"; then
if eval "test \"`echo '$''{'ac_cv_prog_CPP'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
    # This must be in double quotes, not single quotes, because CPP may get
  # substituted into the Makefile and "${CC-cc}" will confuse make.
  CPP="${CC-cc} -E"
  # On the NeXT, cc -E runs the code through the compiler's parser,
  # not just through cpp.
  cat > conftest.$ac_ext <<EOF
#line 1661 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:1667: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then