makefile.in

这是一个自动生成MAKEFILE的工具。相信大家都听说过。在LINUX工程项目里是很好的帮手。希望对大家有点帮助。

uninstall-scriptDATA:
	@$(NORMAL_UNINSTALL)
	list='$(script_DATA)'; for p in $$list; do \
	  rm -f $(DESTDIR)$(scriptdir)/$$p; \
	done

# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
#     (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.

@SET_MAKE@

all-recursive install-data-recursive install-exec-recursive \
installdirs-recursive install-recursive uninstall-recursive  \
check-recursive installcheck-recursive info-recursive dvi-recursive:
	@set fnord $(MAKEFLAGS); amf=$$2; \
	dot_seen=no; \
	target=`echo $@ | sed s/-recursive//`; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    dot_seen=yes; \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
	done; \
	if test "$$dot_seen" = "no"; then \
	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
	fi; test -z "$$fail"

mostlyclean-recursive clean-recursive distclean-recursive \
maintainer-clean-recursive:
	@set fnord $(MAKEFLAGS); amf=$$2; \
	dot_seen=no; \
	rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \
	  rev="$$subdir $$rev"; \
	  test "$$subdir" != "." || dot_seen=yes; \
	done; \
	test "$$dot_seen" = "no" && rev=". $$rev"; \
	target=`echo $@ | sed s/-recursive//`; \
	for subdir in $$rev; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
	done && test -z "$$fail"
tags-recursive:
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
	done

tags: TAGS

ID: $(HEADERS) $(SOURCES) $(LISP)
	list='$(SOURCES) $(HEADERS)'; \
	unique=`for i in $$list; do echo $$i; done | \
	  awk '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	here=`pwd` && cd $(srcdir) \
	  && mkid -f$$here/ID $$unique $(LISP)

TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
	tags=; \
	here=`pwd`; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
   if test "$$subdir" = .; then :; else \
	    test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
   fi; \
	done; \
	list='$(SOURCES) $(HEADERS)'; \
	unique=`for i in $$list; do echo $$i; done | \
	  awk '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $$unique $(LISP) -o $$here/TAGS)

mostlyclean-tags:

clean-tags:

distclean-tags:
	-rm -f TAGS ID

maintainer-clean-tags:

distdir = $(PACKAGE)-$(VERSION)
top_distdir = $(distdir)

# This target untars the dist file and tries a VPATH configuration.  Then
# it guarantees that the distribution is self-contained by making another
# tarfile.
distcheck: dist
	-rm -rf $(distdir)
	GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
	mkdir $(distdir)/=build
	mkdir $(distdir)/=inst
	dc_install_base=`cd $(distdir)/=inst && pwd`; \
	cd $(distdir)/=build \
	  && ../configure --srcdir=.. --prefix=$$dc_install_base \
	  && $(MAKE) $(AM_MAKEFLAGS) \
	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
	  && $(MAKE) $(AM_MAKEFLAGS) check \
	  && $(MAKE) $(AM_MAKEFLAGS) install \
	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
	  && $(MAKE) $(AM_MAKEFLAGS) dist
	-rm -rf $(distdir)
	@banner="$(distdir).tar.gz is ready for distribution"; \
	dashes=`echo "$$banner" | sed s/./=/g`; \
	echo "$$dashes"; \
	echo "$$banner"; \
	echo "$$dashes"
dist: distdir
	-chmod -R a+r $(distdir)
	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
	-rm -rf $(distdir)
dist-all: distdir
	-chmod -R a+r $(distdir)
	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
	-rm -rf $(distdir)
distdir: $(DISTFILES)
	-rm -rf $(distdir)
	mkdir $(distdir)
	-chmod 777 $(distdir)
	@for file in $(DISTFILES); do \
	  d=$(srcdir); \
	  if test -d $$d/$$file; then \
	    cp -pr $$d/$$file $(distdir)/$$file; \
	  else \
	    test -f $(distdir)/$$file \
	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
	    || cp -p $$d/$$file $(distdir)/$$file || :; \
	  fi; \
	done
	for subdir in $(SUBDIRS); do \
	  if test "$$subdir" = .; then :; else \
	    test -d $(distdir)/$$subdir \
	    || mkdir $(distdir)/$$subdir \
	    || exit 1; \
	    chmod 777 $(distdir)/$$subdir; \
	    (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir=../$(distdir) distdir=../$(distdir)/$$subdir distdir) \
	      || exit 1; \
	  fi; \
	done
	$(MAKE) $(AM_MAKEFLAGS) top_distdir="$(top_distdir)" distdir="$(distdir)" dist-info
info-am: $(INFO_DEPS)
info: info-recursive
dvi-am: $(DVIS)
dvi: dvi-recursive
check-am: all-am
check: check-recursive
installcheck-am: installcheck-local
installcheck: installcheck-recursive
install-exec-am: install-binSCRIPTS
install-exec: install-exec-recursive

install-data-am: install-info-am install-pkgdataDATA install-scriptDATA
	@$(NORMAL_INSTALL)
	$(MAKE) $(AM_MAKEFLAGS) install-data-hook
install-data: install-data-recursive

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
install: install-recursive
uninstall-am: uninstall-binSCRIPTS uninstall-info uninstall-pkgdataDATA \
		uninstall-scriptDATA
uninstall: uninstall-recursive
all-am: Makefile $(INFO_DEPS) $(SCRIPTS) $(DATA)
all-redirect: all-recursive
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
installdirs: installdirs-recursive
installdirs-am:
	$(mkinstalldirs)  $(DESTDIR)$(bindir) $(DESTDIR)$(infodir) \
		$(DESTDIR)$(pkgdatadir) $(DESTDIR)$(scriptdir)


mostlyclean-generic:

clean-generic:

distclean-generic:
	-rm -f Makefile $(CONFIG_CLEAN_FILES)
	-rm -f config.cache config.log stamp-h stamp-h[0-9]*

maintainer-clean-generic:
mostlyclean-am:  mostlyclean-vti mostlyclean-aminfo mostlyclean-tags \
		mostlyclean-generic

mostlyclean: mostlyclean-recursive

clean-am:  clean-vti clean-aminfo clean-tags clean-generic \
		mostlyclean-am

clean: clean-recursive

distclean-am:  distclean-vti distclean-aminfo distclean-tags \
		distclean-generic clean-am

distclean: distclean-recursive
	-rm -f config.status

maintainer-clean-am:  maintainer-clean-vti maintainer-clean-aminfo \
		maintainer-clean-tags maintainer-clean-generic \
		distclean-am
	@echo "This command is intended for maintainers to use;"
	@echo "it deletes files that may require special tools to rebuild."

maintainer-clean: maintainer-clean-recursive
	-rm -f config.status

.PHONY: uninstall-binSCRIPTS install-binSCRIPTS mostlyclean-vti \
distclean-vti clean-vti maintainer-clean-vti install-info-am \
uninstall-info mostlyclean-aminfo distclean-aminfo clean-aminfo \
maintainer-clean-aminfo uninstall-pkgdataDATA install-pkgdataDATA \
uninstall-scriptDATA install-scriptDATA install-data-recursive \
uninstall-data-recursive install-exec-recursive \
uninstall-exec-recursive installdirs-recursive uninstalldirs-recursive \
all-recursive check-recursive installcheck-recursive info-recursive \
dvi-recursive mostlyclean-recursive distclean-recursive clean-recursive \
maintainer-clean-recursive tags tags-recursive mostlyclean-tags \
distclean-tags clean-tags maintainer-clean-tags distdir info-am info \
dvi-am dvi check check-am installcheck-local installcheck-am \
installcheck install-exec-am install-exec install-data-am install-data \
install-am install uninstall-am uninstall all-redirect all-am all \
installdirs-am installdirs mostlyclean-generic distclean-generic \
clean-generic maintainer-clean-generic clean mostlyclean distclean \
maintainer-clean


install-data-hook:
	@for prog in $(script_DATA); do \
	  chmod +x $(DESTDIR)$(scriptdir)/$$prog; \
	done

installcheck-local:
	for file in $(script_DATA); do \
	  $(PERL) -e "exit ! -x '$(pkgdatadir)/$$file';" || exit 1; \
	done

################################################################

# Run the test suite using Perl 4.
perl4-check: automake aclocal
	@if $(SHELL) -c 'perl4.036 -v' > /dev/null 2>&1; then \
	  $(MAKE) PERL=perl4.036 check; \
	else :; fi

# Some simple checks, and then ordinary check.  These are only really
# guaranteed to work on my machine.
maintainer-check: automake aclocal
	@if test `diff $(srcdir)/automake.in automake | wc -l` -ne 24; then \
	  echo "found too many diffs between automake.in and automake"; 1>&2; \
	  diff -c $(srcdir)/automake.in automake; \
	  exit 1; \
	fi
	$(PERL) -c -w automake
	$(PERL) -c -w aclocal
	@if test `fgrep '\$${' $(srcdir)/[a-z]*.am | fgrep -v '$$$$' | wc -l` -ne 0; then \
	  echo "found too many uses of '\$${'" 1>&2; \
	  exit 1;				\
	else :; fi
	@if test `fgrep 'mkinstalldirs' $(srcdir)/[a-z]*.am | fgrep -v '$$(mkinstalldirs)' | wc -l` -ne 0; then \
	  echo "found incorrect use of mkinstalldirs" 1>&2; \
	  exit 1; \
	else :; fi
	@if $(SHELL) -c 'perl4.036 -v' >/dev/null 2>&1; then \
	  perl4.036 -c -w automake; \
	  perl4.036 -c -w aclocal; \
	else :; fi
	@if grep undef $(srcdir)/automake.in > /dev/null 2>&1; then \
	  echo "Found undef in automake.in; use delete instead" 1>&2; \
	  exit 1; \
	fi
	@if fgrep 'split (/ /' $(srcdir)/automake.in > /dev/null 2>&1; then \
	  echo "Found bad split in automake.in" 1>&2; \
	  exit 1; \
	fi

# Tag before making distribution.  Also, don't make a distribution if
# checks fail.  Also, make sure the NEWS file is up-to-date.
cvs-dist: maintainer-check perl4-check distcheck
	@if sed 1q $(srcdir)/NEWS | grep -e "$(VERSION)" > /dev/null; then :; else \
	  echo "NEWS not updated; not releasing" 1>&2; \
	  exit 1;				\
	fi
	cd $(srcdir) && cvs -q tag `echo "Release-$(VERSION)" | sed 's/\./-/g'`
	$(MAKE) dist

cvs-diff:
	thisver=`echo "Release-$(VERSION)" | sed 's/\./-/g'`; \
	if test -z "$$OLDVERSION"; then \
	  prevno=`echo "$(VERSION)" - 0.01 | bc | sed 's/^\./0./'`; \
	else prevno="$$OLDVERSION"; fi; \
	prevver=Release-`echo $$prevno | sed 's/\./-/g'`; \
	cvs -f rdiff -c -r $$prevver -r $$thisver $(PACKAGE) \
	    > $(PACKAGE)-$$prevno-$(VERSION).diff

path-check: distdir
	(cd $(distdir) && \
	  find . -print | xargs pathchk -p); \
	  status=$$?; \
	  rm -rf $(distdir); \
	  exit $$status

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: