+-+

VB开发的ERP系统

        End If
  
        '行没有发生变化则不进行有效性判断
        If Hyxxpdlock Then
            Sjhzyxxpd = True
            Exit Function
        End If

        '以下为自定义部分[

        '1.1首先进行单个不能为空或不能为零判断(Fixed)
        For Jsqte = Qslz To .Cols - 1
               
            '字段不能为空
            If GridInt(Jsqte, 5) = 1 Then
                If Len(Trim(.TextMatrix(Yxxpdh, Jsqte))) = 0 Then
                    Tsxx = GridStr(Jsqte, 2)
                    Lrywlz = Jsqte
                    GoTo Lrcwcl
                    Exit For
                End If
            End If
               
            '字段不能为零
            If GridInt(Jsqte, 5) = 2 Then
                If Val(Trim(.TextMatrix(Yxxpdh, Jsqte))) = 0 Then
                    Tsxx = GridStr(Jsqte, 2)
                    Lrywlz = Jsqte
                    GoTo Lrcwcl
                    Exit For
                End If
            End If
               
            Next Jsqte


        '1.2进行其他有效性判断,编写格式同1.1
        '判断年销售定额是否等于各月销售定额之和
        '判断年计划金额是否等于各月计划金额之和
        For TempCol = 7 To 29 Step 2
            If Trim(WglrGrid.TextMatrix(Yxxpdh, TempCol)) = "" Then
                SumPlanAmount = SumPlanAmount + 0
            Else
                SumPlanAmount = SumPlanAmount + Val(Trim(WglrGrid.TextMatrix(Yxxpdh, TempCol)))
            End If
            If Trim(WglrGrid.TextMatrix(Yxxpdh, TempCol + 1)) = "" Then
                SumPlanMoney = SumPlanMoney + 0
            Else
                SumPlanMoney = SumPlanMoney + Val(Trim(WglrGrid.TextMatrix(Yxxpdh, TempCol + 1)))
            End If
        Next
        If Val(Trim(WglrGrid.TextMatrix(Yxxpdh, 5))) <> SumPlanAmount Then
                    Tsxx = "年计划金额不等于各月计划金额总和!"
                    Lrywlz = 5
                    GoTo Lrcwcl
        End If
        If Val(Trim(WglrGrid.TextMatrix(Yxxpdh, 6))) <> SumPlanMoney Then
                    Tsxx = "年销售定额不等于各月销售定额总和!"
                    Lrywlz = 6
                    GoTo Lrcwcl
        End If
        '判断年计划数量和年计划金额是否同时为零
        If Val(WglrGrid.TextMatrix(Yxxpdh, 5)) = 0 And Val(WglrGrid.TextMatrix(Yxxpdh, 6)) = 0 Then
            Sjhzyxxpd = True
            Exit Function
        End If
            
        '2.放置行处理程序(当数据行通过有效性判断)
       
        On Error GoTo Swcwcl

        Cw_DataEnvi.DataConnect.BeginTrans
        If WglrGrid.TextMatrix(Yxxpdh, 31) <> "" Then
            Cw_DataEnvi.DataConnect.Execute ("delete from xs_plan WHERE Planid>=" & Val(WglrGrid.TextMatrix(Yxxpdh, 31)) & " and Planid<=" & Val(WglrGrid.TextMatrix(Yxxpdh, 31)) + 12)
        End If
        With RecTemp
            If .State = 1 Then .Close
            .Open "SELECT * FROM Xs_Plan WHERE CusCode='" & Trim(WglrGrid.TextMatrix(Yxxpdh, 3)) & "' and PersonCode='' and DeptCode='" & Trim(WglrGrid.TextMatrix(Yxxpdh, 1)) & "'", Cw_DataEnvi.DataConnect, adOpenDynamic, adLockOptimistic
                MonthValue = 0
                For TempCol = 5 To 29 Step 2
                    .AddNew
                    .Fields("DeptCode") = Trim(WglrGrid.TextMatrix(Yxxpdh, 1))
                    .Fields("CusCode") = Trim(WglrGrid.TextMatrix(Yxxpdh, 3))
                    .Fields("KjYear") = Xtyear
                    .Fields("Period") = MonthValue
                    If Trim(WglrGrid.TextMatrix(Yxxpdh, TempCol)) = "" Then
                        .Fields("PlanMoney") = 0
                    Else
                        .Fields("PlanMoney") = Val(WglrGrid.TextMatrix(Yxxpdh, TempCol))  '金额
                    End If
                    If Trim(WglrGrid.TextMatrix(Yxxpdh, TempCol + 1)) = "" Then
                        .Fields("PlanMoneyMin") = 0
                    Else
                        .Fields("PlanMoneyMin") = Val(WglrGrid.TextMatrix(Yxxpdh, TempCol + 1)) '金额                .Update
                    End If
                    MonthValue = MonthValue + 1
                    RecTemp.Update
                Next
                WglrGrid.TextMatrix(Yxxpdh, 31) = .Fields("PlanID") - 12
        End With
        Cw_DataEnvi.DataConnect.CommitTrans
         
    End With

    '以上为自定义部分]

    Sjhzyxxpd = True
    Hyxxpdlock = True
    Exit Function

Swcwcl:

    Cw_DataEnvi.DataConnect.RollbackTrans
    Tsxx = "存盘过程中出现未知错误,程序自动恢复保存前状态!"
    Call Xtxxts(Tsxx, 0, 1)
    Exit Function

Lrcwcl:      '录入错误处理

    With WglrGrid
        Call Xtxxts(Tsxx, 0, 1)
        Changelock = True
        .Select Yxxpdh, Lrywlz
        Changelock = False
        Call xswbk

        Sjhzyxxpd = False
        Exit Function
    End With
    
End Function

'===================以 下 程 序 为 通 用 部 分 ,一 般 不 需 更 改(程序动作部分)======================='
Private Sub Sub_AdjustGrid()

    '调 整 网 格
    With WglrGrid
        '加 1 保持一行录入行
        If .Rows < Pmbcsjhs + .FixedRows + Fzxwghs + 1 Then
            .Rows = Pmbcsjhs + .FixedRows + Fzxwghs + 1
            For Jsqte = .FixedRows To .Rows - 1
                .RowHeight(Jsqte) = Sjhgd
            Next Jsqte
        End If
            '判断是否有辅助行和录入行,如没有则加行
            Do While .TextMatrix(.Rows - 1 - Fzxwghs, 0) = "*"
                .AddItem ""
                .RowHeight(.Rows - 1) = Sjhgd
            Loop
'        End If
    End With
  
End Sub

Private Sub Lrzdbz()                                                      '录入字段帮助
  
    If Not Ydcommand.Visible Then
        Exit Sub
    End If
   
    With WglrGrid
     
        Valilock = True
    
        '处理通用部分
        Changelock = True        '调入另外窗体必须加锁
        Call Drbmhelp(GridInt(.Col, 6), GridStr(.Col, 3), Trim(Ydtext.Text))
        Changelock = False
        
        If Len(Xtfhcs) <> 0 Then
            If GridInt(.Col, 7) = 0 Then
                Ydtext.Text = Xtfhcs
            Else
                Ydtext.Text = Xtfhcsfz
            End If
        End If
            
        Valilock = False
        
        If Ydtext.Visible Then
            Ydtext.SetFocus
        End If
    
    End With
    
End Sub

Private Sub Form_Resize()                                                '窗体大小发生变化时,重新显示文本框
   
    Call Cxxswbk
    
End Sub

Private Function Fun_Drfrmyxxpd() As Boolean                             '调入其它窗体或功能产生的有效性判断(包括数据回写)
  
    Fun_Drfrmyxxpd = True
    
    With WglrGrid
        '如果当前网格处于编辑状态,则先进行数据回写再进行有效性判断
        
        If Ydtext.Visible Or YdCombo.Visible Then
            Call Lrsjhx
            If Not sjzdyxxpd(Dqlrwgh, Dqlrwgl) Then
                Fun_Drfrmyxxpd = False
                Exit Function
            End If
        End If
        
        '进行行有效性判断
        If Not Sjhzyxxpd(.Row) Then
            Fun_Drfrmyxxpd = False
            Exit Function
        End If
    End With
  
End Function

Private Sub WglrGrid_EnterCell()                                                 '显示当前数据行相关信息
   
    With WglrGrid
        If .Row >= .FixedRows Then
            '[>>
                '此处可以填写显示与此网格行相关信息
            '<<]
        End If
   End With
   
End Sub

Private Sub WglrGrid_GotFocus()                                     '网格得到焦点

    '网格得到焦点,如果当前选择行为非数据行
    '则调整当前焦点至有效数据行

    With WglrGrid
        If .Row < .FixedRows And .Rows > .FixedRows Then
            Changelock = True
            .Select .FixedRows, .Col
            Changelock = False
        End If
        If .Col < Qslz Then
            Changelock = True
            .Select .Row, Qslz
            Changelock = False
        End If
    End With

End Sub

Private Sub WglrGrid_LostFocus()                                    '录入网格失去焦点

    '用以屏蔽调用其它窗体时发生网格失去焦点事件
    If Changelock Then
        Exit Sub
    End If

    '引发网格RowcolChange事件
    With WglrGrid
        If Not (Ydtext.Visible Or YdCombo.Visible) Then
            .Select 0, 0
        End If
    End With

End Sub

Private Sub WglrGrid_AfterScroll(ByVal OldTopRow As Long, ByVal OldLeftCol As Long, ByVal NewTopRow As Long, ByVal NewLeftCol As Long)                                       '限制用户在录入过程中滚动鼠标

    If Gdtlock Then
        Exit Sub
    End If
 
    With WglrGrid
        If Ydtext.Visible Or YdCombo.Visible Then
            Gdtlock = True
            .TopRow = Dqtoprow
            .LeftCol = Dqleftcol
            Gdtlock = False
            Exit Sub
        End If
    End With
    
End Sub

Private Sub WglrGrid_LeaveCell()                                    '离开单元格
  
    If Changelock Then
        Exit Sub
    End If

    '记录刚刚离开网格单元的行列值
    Dqlkwgh = WglrGrid.Row
    Dqlkwgl = WglrGrid.Col

    '判断是否需要录入数据回写
    If Not (Ydtext.Visible Or YdCombo.Visible) Then
        Exit Sub
    End If
    
    Call Lrsjhx
    
End Sub

Private Sub WglrGrid_RowColChange()                                '网格录入行列发生变化时,进行有效性判断
   
    Valilock = True       '屏蔽文本框失去焦点进行有效性判断
    
    With WglrGrid
        If Changelock Then
            Exit Sub
        End If
        If Not sjzdyxxpd(Dqlrwgh, Dqlrwgl) Then
            Exit Sub
        End If
        If .Row <> Dqlkwgh Then
            If Not Sjhzyxxpd(Dqlkwgh) Then
                Exit Sub
            End If
        End If
    End With