VB开发的ERP系统

    
    '条件
    If Val(Me.LrText(0).Text) > iMaxLevel Or Val(Me.LrText(1).Text) < iMinLevel Then
        Me.LrText(0).Text = iMinLevel
    End If
    If Val(Me.LrText(1).Text) > iMaxLevel Or Val(Me.LrText(1).Text) < iMinLevel Then
        Me.LrText(1).Text = iMaxLevel
    End If
    
    If Trim(Me.sSqlWhereMore) = "" Then
        Me.sSqlWhereMore = " Rs_BasicInfo.YnStop=0 "
    End If
    s = " where 1=1 " & Chr(10)
    s = s & " and GY_Department.CodeLevel>=" & Val(Trim(Me.LrText(0).Text)) & Chr(10) _
        & " and GY_Department.CodeLevel <= " & Val(Trim(Me.LrText(1).Text)) & Chr(10)
    If Trim(Me.LrText(2).Text) <> "" Then
        s = s & " and GY_Department.DeptCode >='" & Trim(Me.LrText(2).Text) & "' " & Chr(10)
    End If
    If Trim(Me.LrText(3).Text) <> "" Then
        s = s & " and GY_Department.DeptCode <='" & Trim(Me.LrText(3).Text) & "' " & Chr(10)
    End If
    
    Me.sSqlWhereMe = s
    
    Me.sSqlWhere = Me.sSqlWhereMe & " and (" & Me.sSqlWhereMore & " ) "
    
        
    Me.Hide
    '刷新数据
    With An_RsAgeFrm
        .sSqlWhereMe = Me.sSqlWhereMe
        .sSqlWhere = Me.sSqlWhere
        .sSqlWhereMore = Me.sSqlWhereMore
        .int_CodeLevel = Val(LrText(0).Text)
        .Timer1.Enabled = True
        .SetFocus
    End With
    
    
End Sub

Private Sub QxCommand_Click()                                    '取消
    Me.Hide
End Sub
Private Function Lrtjyxxpd() As Boolean                          '用户录入条件有效性判断
 Dim jsqte As Integer
 Lrtjyxxpd = False
 
'对需要进行事后判断的文本框录入内容进行有效性判断 (固定不变)
  For jsqte = 0 To Max_Text_Index
    If Textint(jsqte, 9) = 0 Or Textint(jsqte, 9) = 2 Then
      If Not TextYxxpd(jsqte) Then
         Exit Function
      End If
    End If
  Next jsqte
   
 '[>>以下为依据实际情况自定义部分
 
  '查询日期范围应由小到大
  
  
 '<<]以上为依据实际情况自定义部分
 
 Lrtjyxxpd = True
End Function

'************以下为文本框录入处理程序(固定不变部分)*************'

Private Sub Wbklrwbcl(Index As Integer)    '文本框录入事后处理程序

  '以下为依据实际情况自定义部分[
  
      '在此填写文本框录入事后处理程序
   
  ']以上为依据实际情况自定义部分
End Sub
Private Sub LrText_Change(Index As Integer)

   '屏蔽程序改变控制
   If TextChangeLock Then
      Exit Sub
   End If
   
   TextValiJudgeLock(Index) = False    '打开有效性判断锁
    
    '限制字段录入长度
          
     TextChangeLock = True  '加锁(防止执行Lrtext_Change)
     
     Call TextChangeLimit(LrText(Index), Textint(Index, 1))  '去掉无效字符
     
        Select Case Textint(Index, 1)
           Case 8, 11      '金额型
             Call Sjgskz(LrText(Index), Xtjezws - Xtjexsws - 1, Xtjexsws)
           Case 9, 12      '数量型
             Call Sjgskz(LrText(Index), Xtslzws - Xtslxsws - 1, Xtslxsws)
           Case 10          '单价型
             Call Sjgskz(LrText(Index), Xtdjzws - Xtdjxsws - 1, Xtdjxsws)
           Case Else        '其他小数类型控制
              If Textint(Index, 6) <> 0 Or Textint(Index, 7) <> 0 Then
                 Call Sjgskz(LrText(Index), Textint(Index, 6), Textint(Index, 7))
              End If
        End Select
     TextChangeLock = False '解锁
End Sub
Private Sub LrText_GotFocus(Index As Integer)                                                 '文本框得到焦点,显示相应信息
   Call TextShow(Index)
   CurTextIndex = Index
   LrText(Index).SelStart = Len(LrText(Index))
End Sub
Private Sub LrText_KeyDown(Index As Integer, KeyCode As Integer, Shift As Integer)            '字段按F2键提供帮助
   Select Case KeyCode
      Case vbKeyF2
        Call Text_Help(Index)
   End Select
End Sub
Private Sub LrText_KeyPress(Index As Integer, KeyAscii As Integer)                            '文本框录入事中控制
   Call InputFieldLimit(LrText(Index), Textint(Index, 1), KeyAscii)
End Sub
Private Sub LrText_LostFocus(Index As Integer)                                                '文本框失去焦点进行有效性判断及相应处理
  If Textint(Index, 9) = 0 Or Textint(Index, 9) = 1 Then '事中判断
     Call TextYxxpd(Index)
  End If
End Sub
Private Sub Ydcommand1_MouseDown(Index As Integer, Button As Integer, Shift As Integer, X As Single, Y As Single)     '按钮提供帮助
   Call Text_Help(Index)
End Sub
Private Sub Text_Help(Index As Integer)                                                       '录入字段帮助
    If Not Textboolean(Index, 1) Then
       Exit Sub
    End If
    'mp 2001-12-27
    If Me.Ydcommand1(Index).Visible = False Or Me.Ydcommand1(Index).Enabled = False Then
        Exit Sub
    End If
    TextValiJudgeLock(Index) = True
    
     '先进行有效性判断
    If Not TextYxxpd(CurTextIndex) Then
       Exit Sub
    End If
    
     '[>>调入参照窗体
   
        
    Call Drbmhelp(Textint(Index, 2), Textstr(Index, 4), Trim(LrText(Index).Text))
     
     '<<]

    If Len(Xtfhcs) <> 0 Then
       If Textint(Index, 3) = 1 Then
          LrText(Index).Text = Xtfhcsfz
          LrText(Index).Tag = Xtfhcs
       Else
          LrText(Index).Text = Xtfhcs
          LrText(Index).Tag = Xtfhcsfz
       End If
    
    End If
   TextValiJudgeLock(Index) = False
   LrText(Index).SetFocus
End Sub
Private Sub TextShow(Index As Integer)        '文本框得到焦点,显示相应信息

   '填写文本框得到焦点,进行相应信息处理程序
   
End Sub
Private Sub Wbkcsh()                          '录入文本框初始化
  Dim jsqte As Integer
  
  '最大录入文本框索引值
  Max_Text_Index = Textvar(1)
  
  ReDim TextValiJudgeLock(Max_Text_Index)
  For jsqte = 0 To Max_Text_Index
     
     If Len(Trim(Textstr(jsqte, 1))) <> 0 Then
        If Textboolean(jsqte, 1) Then
            If jsqte <> 0 And Not Textboolean(jsqte, 3) Then
                Load Ydcommand1(jsqte)
            End If
            Ydcommand1(jsqte).Visible = True
            Ydcommand1(jsqte).Move LrText(jsqte).Left + LrText(jsqte).Width, LrText(jsqte).Top
        End If
        TextChangeLock = True
         LrText(jsqte).Text = ""
         LrText(jsqte).Tag = ""
         If Textint(jsqte, 5) <> 0 Then
            LrText(jsqte).MaxLength = Textint(jsqte, 5)
         End If
        TextChangeLock = False
     End If
     TextValiJudgeLock(jsqte) = True
  Next jsqte
End Sub
Private Function TextYxxpd(Index As Integer) As Boolean           '文本框有效性判断
  Dim Sqlstr As String
  Dim Findrec As ADODB.Recordset
  If TextValiJudgeLock(Index) Then    '文本框内容未曾改变不进行有效性判断
     TextYxxpd = True
     Exit Function
  End If
  If Trim(LrText(Index)) = "" Then
     LrText(Index).Tag = ""
     Call Wbklrwbcl(Index)
     TextValiJudgeLock(Index) = True
     TextYxxpd = True
     Exit Function
  End If

       Select Case Textint(Index, 4)
         Case 1      '编码型
            Sqlstr = Trim(Textstr(Index, 5))
            Sqlstr = Replace(Sqlstr, "@", "'" + Trim(LrText(Index).Text) + "'")
            Sqlstr = Replace(Sqlstr, "#", "'" + Trim(Me.Lab_Note(Index).Tag) + "'")
            Set Findrec = Cw_DataEnvi.DataConnect.Execute(Sqlstr)
            If Findrec.EOF Then
               Call Xtxxts(Trim(Textstr(Index, 6)), 0, 1)
               LrText(Index).SetFocus
               Exit Function
            Else
               Select Case Textint(Index, 3)
                 Case 0
                   If Len(Trim(Textstr(Index, 2))) <> 0 Then
                      LrText(Index).Text = Trim(Findrec.Fields(Trim(Textstr(Index, 2))))
                   End If
                    If Len(Trim(Textstr(Index, 3) & "")) <> 0 Then
                      LrText(Index).Tag = Trim(Findrec.Fields(Trim(Textstr(Index, 3))))
                   End If
                 Case 1
                   If Len(Trim(Textstr(Index, 3) & "")) <> 0 Then
                      LrText(Index).Text = Trim(Findrec.Fields(Trim(Textstr(Index, 3))))
                   End If
                    If Len(Trim(Textstr(Index, 2))) <> 0 Then
                      LrText(Index).Tag = Trim(Findrec.Fields(Trim(Textstr(Index, 2))))
                   End If
               End Select
            End If
         Case 2      '日期型
            If IsDate(LrText(Index).Text) Then
               LrText(Index).Text = Format(LrText(Index).Text, "yyyy-mm-dd")
               If Val(Mid(LrText(Index), 1, 4)) < 1900 Then
                  LrText(Index).Text = "1900" + Mid(LrText(Index), 5, 6)
               End If
             Else
               Tsxx = "非法公历日期!(格式:" + Format(Date, "yyyy-mm-dd") + ")"
               Call Xtxxts(Tsxx, 0, 1)
               LrText(Index).SetFocus
               Exit Function
            End If
         Case 3      '其他类型
         
       End Select
   TextValiJudgeLock(Index) = True
   TextYxxpd = True
End Function