+ަ

VB开发的ERP系统

        End If
        If Not .EOF Then
            .MoveNext
        End If
        
        If Not .EOF Then
            Lab_BillId.Caption = .Fields("LubricateAnalyzeID")
        Else
            .MovePrevious
        End If
        
        Call Sub_ShowBill
    End With
    
End Sub

Private Sub Sub_Last()              '末 张
    
    With Rec_Query
        If .RecordCount = 0 Then
            Exit Sub
        End If
        .MoveLast
        Lab_BillId.Caption = .Fields("LubricateAnalyzeID")
        Call Sub_ShowBill
    End With
    
End Sub
    
'[>>===================以下为根据实际业务需要自定义过程区域=============================<<]

'审核,弃审
Private Sub Sub_CheckBill()             '审 核
    '[>>
    
    '此处可以写入禁止单据审核的理由
    
    '<<]
    
    '将单据写入审核标识
    Cw_DataEnvi.DataConnect.Execute ("Update Dev_LubricateAnalyze Set Checker='" & Xtczy & "' Where CloseBillID=" & Val(Lab_BillId.Caption))
    
    '写入系统操作员
    LrText(8).Text = Xtczy
    
    '设置审核弃审按钮状态
    Call Sub_CheckStatus
    
    '标识单据发生变化
    Bln_BillChange = True
    
End Sub

Private Sub Sub_AbandonCheck()          '弃 审
    '[>>
    
    '此处可以写入禁止单据弃审的理由
    
    '<<]
    
    '将单据清除审核标识
    Cw_DataEnvi.DataConnect.Execute ("Update Dev_LubricateAnalyze Set Checker='' Where CloseBillID=" & Val(Lab_BillId.Caption))
    
    '清空单据审核人
    LrText(8).Text = ""
    
    '设置审核弃审按钮状态
    Call Sub_CheckStatus
    
    '标识单据发生变化
    Bln_BillChange = True
    
End Sub

Private Function Fun_AllowEdit() As Boolean                      '判断当前单据是否允许编辑或删除
    
    Dim RecTemp As New ADODB.Recordset     '临时使用动态集
    Fun_AllowEdit = False
    Sqlstr = "Select Checker From Dev_LubricateAnalyze Where LubricateAnalyzeID=" & Val(Lab_BillId.Caption)
    Set RecTemp = Cw_DataEnvi.DataConnect.Execute(Sqlstr)
    With RecTemp
        If Not .EOF Then
            If Trim(.Fields("Checker") & "") <> "" Then
                Tsxx = "该单据已审核确认,不能修改或删除!"
                Call Xtxxts(Tsxx, 0, 4)
                Exit Function
            End If
        End If
    End With
    Fun_AllowEdit = True
    
End Function

'[>>===================以上为根据实际业务需要自定义过程区域=============================<<]

'*****************************以下为文本框录入处理程序(固定不变部分)*******************************'

'************以下为文本框录入处理程序(固定不变部分)*************'
Private Sub Wbklrwbcl(Index As Integer)    '文本框录入事后处理程序
    
    '以下为依据实际情况自定义部分[
    
    '在此填写文本框录入事后处理程序
    
    ']以上为依据实际情况自定义部分
    
End Sub

Private Sub LrText_Change(Index As Integer)
    
    '屏蔽程序改变控制
    If TextChangeLock Then
        Exit Sub
    End If
    
    If Index = 1 Or Index = 3 Then LrText_LostFocus (Index)
    
    TextValiJudgeLock(Index) = False    '打开有效性判断锁
    
    '限制字段录入长度
    
    TextChangeLock = True  '加锁(防止执行Lrtext_Change)
    
    Call TextChangeLimit(LrText(Index), Textint(Index, 1))  '去掉无效字符
    
    Select Case Textint(Index, 1)
    Case 8, 11      '金额型
        Call Sjgskz(LrText(Index), Xtjezws - Xtjexsws - 1, Xtjexsws)
    Case 9, 12      '数量型
        Call Sjgskz(LrText(Index), Xtslzws - Xtslxsws - 1, Xtslxsws)
    Case 10          '单价型
        Call Sjgskz(LrText(Index), Xtdjzws - Xtdjxsws - 1, Xtdjxsws)
    Case Else        '其他小数类型控制
        If Textint(Index, 6) <> 0 Or Textint(Index, 7) <> 0 Then
            Call Sjgskz(LrText(Index), Textint(Index, 6), Textint(Index, 7))
        End If
    End Select
    
    TextChangeLock = False '解锁
    
End Sub

Private Sub LrText_GotFocus(Index As Integer)                                                 '文本框得到焦点,显示相应信息
    
    Call TextShow(Index)
    CurTextIndex = Index
    LrText(Index).SelStart = Len(LrText(Index))
    
End Sub

Private Sub LrText_KeyDown(Index As Integer, KeyCode As Integer, Shift As Integer)            '字段按F2键提供帮助
    
    Select Case KeyCode
    Case vbKeyF2
        Call Text_Help(Index)
    End Select
    
End Sub

Private Sub LrText_KeyPress(Index As Integer, KeyAscii As Integer)                            '文本框录入事中控制
    Call InputFieldLimit(LrText(Index), Textint(Index, 1), KeyAscii)
End Sub

Private Sub LrText_LostFocus(Index As Integer)                                                '文本框失去焦点
    
    '显示相应信息但不能进行有效性判断
    '显示相应信息但不能进行有效性判断
    Dim Lado As ADODB.Recordset
    Dim LSqlstr As String

    Select Case Index
            Case 1      '润滑油编号
                LSqlstr = "select * from dev_lubricatecord  "
                LSqlstr = LSqlstr + " where 1=1 and lubricatecode ='" & Xtfhcs & "'"
                Set Lado = Cw_DataEnvi.DataConnect.Execute(LSqlstr)
                If Lado.RecordCount > 0 Then
                    LrText(2).Text = Lado.Fields("lubricatemodel")                    '润滑油型号
                End If
            Case 3      '设备编号
                LSqlstr = "select * from dev_main inner join Gy_Department "
                LSqlstr = LSqlstr + " ON Dev_Main.deptCode = Gy_Department.DeptCode "
                LSqlstr = LSqlstr + " where 1=1 and devid='" & Trim(LrText(3).Text) & "'"
                
                Set Lado = Cw_DataEnvi.DataConnect.Execute(LSqlstr)
                If Lado.RecordCount > 0 Then
                    LrText(4).Text = Lado.Fields("Dname")                       '设备名称
                    LrText(5).Text = Lado.Fields("model")                       '规格型号
                    LrText(6).Text = Lado.Fields("DeptName")                    '所属部门
                End If
    End Select
    
End Sub

Private Sub Ydcommand1_MouseDown(Index As Integer, Button As Integer, Shift As Integer, x As Single, y As Single)     '按钮提供帮助
    
    '文本框处于非录入状态时不允许调入帮助
    If Not LrText(Index).Enabled Then
        Exit Sub
    End If
    
    Call Text_Help(Index)
    
End Sub

Private Sub Text_Help(Index As Integer)                                                       '录入字段帮助
    
    If Not Textboolean(Index, 1) Then
        Exit Sub
    End If
    
    '调用帮助
    Call Drbmhelp(Textint(Index, 2), Textstr(Index, 4), Trim(LrText(Index).Text))
    
    '根据设置选择显示编码和名称,并进行存储
    If Len(Xtfhcs) <> 0 Then
        If Textint(Index, 3) = 1 Then
            LrText(Index).Text = Xtfhcsfz
            LrText(Index).Tag = Xtfhcs
        Else
            LrText(Index).Text = Xtfhcs
            LrText(Index).Tag = Xtfhcsfz
        End If
    End If
    
    LrText(Index).SetFocus
    
End Sub

Private Sub TextShow(Index As Integer)        '文本框得到焦点,显示相应信息
    
    '填写文本框得到焦点,进行相应信息处理程序
    
End Sub

Private Sub Wbkcsh()                          '录入文本框初始化
    
    Dim Int_TabIndex As Integer         'Tab焦点计数器
    
    '单据录入中文本框焦点由0开始
    LrText(0).TabIndex = 0
    
    '最大录入文本框索引值
    Max_Text_Index = Textvar(1)
    
    ReDim TextValiJudgeLock(Max_Text_Index)
    For jsqte = 0 To Max_Text_Index
        
        '判断此文本框录入索引号是否存在,如存在则对其进行初始化
        If Len(Trim(Textstr(jsqte, 1))) <> 0 Then
            
            '自动装入录入文本框和其解释标签
            If jsqte <> 0 Then
                Load LrText(jsqte)
                Load tsLabel(jsqte)
                
                '判断录入文本框是否显示
                If Textboolean(jsqte, 4) Then
                    LrText(jsqte).Visible = True
                    tsLabel(jsqte).Visible = True
                End If
                
                '判断文本框是否可编辑
                If Textboolean(jsqte, 5) Then
                    LrText(jsqte).Enabled = True
                Else
                    LrText(jsqte).Enabled = False
                End If
                
                '判断文本框是否提供帮助
                If Textboolean(jsqte, 1) Then
                    If Not Textboolean(jsqte, 3) Then
                        Load Ydcommand1(jsqte)
                    End If
                End If
            End If
            
            '初始化其内容
            TextChangeLock = True
            LrText(jsqte).Text = ""
            LrText(jsqte).Tag = ""
            If Textint(jsqte, 5) <> 0 Then
                LrText(jsqte).MaxLength = Textint(jsqte, 5)
            End If
            TextChangeLock = False
            
            '设置文本框位置及大小,并设置相应标签内容及其位置
            LrText(jsqte).Move Textint(jsqte, 13), Textint(jsqte, 12), Textint(jsqte, 11), Textint(jsqte, 10)
            tsLabel(jsqte).Caption = Textstr(jsqte, 7) & ":"
            tsLabel(jsqte).Move Textint(jsqte, 13) - tsLabel(jsqte).Width - 20, Textint(jsqte, 12) + (Textint(jsqte, 10) - tsLabel(jsqte).Height) / 2 - 30
            
            '判断文本框是否提供帮助
            If Textboolean(jsqte, 1) Then
                Ydcommand1(jsqte).Visible = True
                Ydcommand1(jsqte).Move LrText(jsqte).Left + LrText(jsqte).Width, LrText(jsqte).Top
            End If
        End If
        
        '将文本框有效性判断进行加锁,在文本框内容发生变化时将锁打开
        TextValiJudgeLock(jsqte) = True
        
    Next jsqte
    
    '设置文本框焦点转移顺序(前提文本焦点从0至Max_Text_Index)
    For Int_TabIndex = 0 To Max_Text_Index
        For jsqte = 0 To Max_Text_Index
            If Textint(jsqte, 14) = Int_TabIndex Then
                LrText(jsqte).TabIndex = Int_TabIndex
            End If
        Next jsqte
    Next Int_TabIndex
    
End Sub

Private Function TextYxxpd(Index As Integer) As Boolean           '文本框有效性判断
    
    Dim Sqlstr As String
    Dim Findrec As ADODB.Recordset
    
    '文本框内容未曾改变不进行有效性判断
    If TextValiJudgeLock(Index) Then
        TextYxxpd = True
        Exit Function
    End If
    
    '文本框内容为空认为有效,并清空其Tag值
    If Trim(LrText(Index)) = "" Then
        LrText(Index).Tag = ""
        Call Wbklrwbcl(Index)
        TextValiJudgeLock(Index) = True
        TextYxxpd = True
        Exit Function
    End If
    
    '可在此加入不做有效性判断的理由
    
    Select Case Textint(Index, 4)
    Case 1      '编码型
        Sqlstr = Trim(Textstr(Index, 5))
        Sqlstr = Replace(Sqlstr, "@", "'" + Trim(LrText(Index).Text) + "'")
        Set Findrec = Cw_DataEnvi.DataConnect.Execute(Sqlstr)
        If Findrec.EOF Then
            Call Xtxxts(Trim(Textstr(Index, 6)), 0, 1)
            LrText(Index).SetFocus
            Exit Function
        Else
            Select Case Textint(Index, 3)
            Case 0
                If Len(Trim(Textstr(Index, 2))) <> 0 Then
                    LrText(Index).Text = Trim(Findrec.Fields(Trim(Textstr(Index, 2))))
                End If
                If Len(Trim(Textstr(Index, 3) & "")) <> 0 Then
                    LrText(Index).Tag = Trim(Findrec.Fields(Trim(Textstr(Index, 3))))
                End If
            Case 1
                If Len(Trim(Textstr(Index, 3) & "")) <> 0 Then
                    LrText(Index).Text = Trim(Findrec.Fields(Trim(Textstr(Index, 3))))
                End If
                If Len(Trim(Textstr(Index, 2))) <> 0 Then
                    LrText(Index).Tag = Trim(Findrec.Fields(Trim(Textstr(Index, 2))))
                End If
            End Select
        End If
    Case 2      '日期型
        If IsDate(LrText(Index).Text) Then
            LrText(Index).Text = Format(LrText(Index).Text, "yyyy-mm-dd")
            If Val(Mid(LrText(Index), 1, 4)) < 1900 Then
                LrText(Index).Text = "1900" + Mid(LrText(Index), 5, 6)
            End If
        Else
            Tsxx = "非法公历日期!(格式:" + Format(Date, "yyyy-mm-dd") + ")"
            Call Xtxxts(Tsxx, 0, 1)
            LrText(Index).SetFocus
            Exit Function
        End If
    Case 3      '其他类型
    End Select
    
    '如果有效则加锁,用户不改变内容则不再进行有效性判断
    TextValiJudgeLock(Index) = True
    
    '调用文本框事后处理程序
    Call Wbklrwbcl(Index)
    
    '有效性判断通过则返回True
    TextYxxpd = True
    
End Function