ʰ

VB开发的ERP系统

                End If
            End If
            
        Next Jsqte
        
        
        '1.2进行其他有效性判断,编写格式同1.1
        '首先进行为空判断(固定不变)
        '以下为自定义部分[
        For Jsqte = Qslz To .Cols - 1
            If (GridInt(Jsqte, 5) = 1 And Len(Trim(.TextMatrix(Yxxpdh, Jsqte))) = 0) Or (GridInt(Jsqte, 5) = 2 And Val(Trim(.TextMatrix(Yxxpdh, Jsqte))) = 0) Then
                Tsxx = GridStr(Jsqte, 2)
                Lrywlz = Jsqte
                GoTo Lrcwcl
                Exit For
            End If
        Next Jsqte
        '2.[自定义判断(补丁)
        If Val(Trim(.TextMatrix(Yxxpdh, Sydz("004", GridStr(), Szzls)))) = 0 And Val(Trim(.TextMatrix(Yxxpdh, Sydz("005", GridStr(), Szzls)))) = 0 Then
            Tsxx = "借方和贷方金额不能同时为零!"
            Lrywlz = Sydz("004", GridStr(), Szzls)
            GoTo Lrcwcl
        End If
        If Val(Trim(.TextMatrix(Yxxpdh, Sydz("004", GridStr(), Szzls)))) <> 0 And Val(Trim(.TextMatrix(Yxxpdh, Sydz("005", GridStr(), Szzls)))) <> 0 Then
            Tsxx = "借方和贷方金额不能同时不为零!"
            Lrywlz = Sydz("004", GridStr(), Szzls)
            GoTo Lrcwcl
        End If
        '日期判断
        If Trim(.TextMatrix(Yxxpdh, Sydz("001", GridStr(), Szzls))) = "" Then
            Tsxx = "必须输入日期!"
            Lrywlz = Sydz("001", GridStr(), Szzls)
            GoTo Lrcwcl
        End If
        
        If Val(Trim(.TextMatrix(Yxxpdh, Sydz("004", GridStr(), Szzls)))) <> 0 And Val(Trim(.TextMatrix(Yxxpdh, Sydz("005", GridStr(), Szzls)))) = 0 Then
            Lrywlz = Sydz("004", GridStr(), Szzls)
        End If
        If Val(Trim(.TextMatrix(Yxxpdh, Sydz("004", GridStr(), Szzls)))) = 0 And Val(Trim(.TextMatrix(Yxxpdh, Sydz("005", GridStr(), Szzls)))) <> 0 Then
            Lrywlz = Sydz("004", GridStr(), Szzls)
        End If
        '以上为自定义部分]
        '2.放置行处理程序(当数据行通过有效性判断)
        
        On Error GoTo Swcwcl
        Cw_DataEnvi.DataConnect.BeginTrans
        If Recfind.State = 1 Then Recfind.Close
        Recfind.Open "select * from Gy_settlement where ssname='" & WglrGrid.TextMatrix(Yxxpdh, Sydz("008", GridStr(), Szzls)) & "'", Cw_DataEnvi.DataConnect, adOpenDynamic, adLockOptimistic            '附单据数
        If Recfind.EOF = False Then
            jsfs = Recfind.Fields!sscode
        End If
        If WglrGrid.TextMatrix(Yxxpdh, 1) = "" Then
            If RecTemp.State = 1 Then RecTemp.Close
            RecTemp.Open "Select * From Cwzz_bankbill", Cw_DataEnvi.DataConnect, adOpenDynamic, adLockOptimistic
            With RecTemp
                '新增
                .AddNew
                .Fields("RecType") = 1                                                                      '记录类型
                .Fields("ccode") = Val(Lab_kjbm)                                                            '会计科目
                .Fields("billdate") = WglrGrid.TextMatrix(Yxxpdh, Sydz("001", GridStr(), Szzls))            '票据日期
                .Fields("billno") = WglrGrid.TextMatrix(Yxxpdh, Sydz("003", GridStr(), Szzls))              '票号
                
                Sqlstr = "select * from Gy_settlement where ssname='" & WglrGrid.TextMatrix(Yxxpdh, Sydz("002", GridStr(), Szzls)) & "'" '结算方式
                Set Recfind = Cw_DataEnvi.DataConnect.Execute(Sqlstr)
                If Recfind.EOF = False Then
                    .Fields("sscode") = Trim(Recfind.Fields!sscode)
                Else
                    .Fields("sscode") = ""
                End If
                
                .Fields("bcheckflag") = 0         '对帐标志
                .Fields("bdelete") = 0            '核销标志
                .Fields("Jfje") = Val(Format(WglrGrid.TextMatrix(Yxxpdh, Sydz("004", GridStr(), Szzls)), "0.00"))           '借方金额
                .Fields("Dfje") = Val(Format(WglrGrid.TextMatrix(Yxxpdh, Sydz("005", GridStr(), Szzls)), "0.00"))           '贷方金额
                .Fields("Digest") = Trim(WglrGrid.TextMatrix(Yxxpdh, Sydz("006", GridStr(), Szzls)))                        '摘要
                .Update
                WglrGrid.TextMatrix(Yxxpdh, 1) = .Fields("BankBillID")
            End With
        Else
            '修改
            If RecTemp.State = 1 Then RecTemp.Close
            RecTemp.Open "Select * From Cwzz_bankbill where ccode='" & Val(Lab_kjbm) & "' and BankBillID='" & WglrGrid.TextMatrix(Yxxpdh, 1) & "'and bcheckflag=0", Cw_DataEnvi.DataConnect, adOpenDynamic, adLockOptimistic
            With RecTemp
                If .EOF = False Then
                    .Fields("RecType") = 1                                                                      '记录类型
                    .Fields("ccode") = Val(Lab_kjbm)                                                            '会计科目
                    .Fields("billdate") = WglrGrid.TextMatrix(Yxxpdh, Sydz("001", GridStr(), Szzls))            '票据日期
                    .Fields("billno") = WglrGrid.TextMatrix(Yxxpdh, Sydz("003", GridStr(), Szzls))              '票号
                    
                    Sqlstr = "select * from Gy_settlement where ssname='" & WglrGrid.TextMatrix(Yxxpdh, Sydz("002", GridStr(), Szzls)) & "'" '结算方式
                    Set Recfind = Cw_DataEnvi.DataConnect.Execute(Sqlstr)
                    If Recfind.EOF = False Then
                        .Fields("sscode") = Trim(Recfind.Fields!sscode)                                                     '制单人
                    End If
                    
                    .Fields("bdelete") = 0            '核销标志
                    .Fields("Jfje") = Val(Format(WglrGrid.TextMatrix(Yxxpdh, Sydz("004", GridStr(), Szzls)), "0.00"))           '借方金额
                    .Fields("Dfje") = Val(Format(WglrGrid.TextMatrix(Yxxpdh, Sydz("005", GridStr(), Szzls)), "0.00"))           '贷方金额
                    .Fields("Digest") = Trim(WglrGrid.TextMatrix(Yxxpdh, Sydz("006", GridStr(), Szzls)))                        '摘要
                    .Update
                End If
            End With
        End If
        Cw_DataEnvi.DataConnect.CommitTrans
        
    End With
    
    '以上为自定义部分]
    
    Sjhzyxxpd = True
    Hyxxpdlock = True
    Exit Function
    
Swcwcl:
    
    Cw_DataEnvi.DataConnect.RollbackTrans
    Tsxx = "存盘过程中出现未知错误,程序自动恢复保存前状态!"
    Call Xtxxts(Tsxx, 0, 1)
    Exit Function
    
Lrcwcl:      '录入错误处理
    
    With WglrGrid
        Call Xtxxts(Tsxx, 0, 1)
        changelock = True
        .Select Yxxpdh, Lrywlz
        changelock = False
        Call xswbk
        
        Sjhzyxxpd = False
        Exit Function
    End With
    
End Function

'===================以 下 程 序 为 通 用 部 分 ,一 般 不 需 更 改(程序动作部分)======================='
Private Sub Sub_AdjustGrid()
    
    '调 整 网 格
    With WglrGrid
        '加 1 保持一行录入行
        If .Rows < Pmbcsjhs + .FixedRows + Fzxwghs + 1 Then
            .Rows = Pmbcsjhs + .FixedRows + Fzxwghs + 1
            For Jsqte = .FixedRows To .Rows - 1
                .RowHeight(Jsqte) = Sjhgd
            Next Jsqte
        Else
            '判断是否有辅助行和录入行,如没有则加行
            Do While .TextMatrix(.Rows - 1 - Fzxwghs, 0) = "*"
                .AddItem ""
                .RowHeight(.Rows - 1) = Sjhgd
            Loop
        End If
    End With
    
End Sub

Private Sub Lrzdbz()                                                      '录入字段帮助
    
    If Not Ydcommand.Visible Then
        Exit Sub
    End If
    
    With WglrGrid
        
        Valilock = True
        
        '处理通用部分
        changelock = True        '调入另外窗体必须加锁
        Call Drbmhelp(GridInt(.Col, 6), GridStr(.Col, 3), Trim(Ydtext.Text))
        changelock = False
        
        If Len(Xtfhcs) <> 0 Then
            If GridInt(.Col, 7) = 0 Then
                Ydtext.Text = Xtfhcs
            Else
                Ydtext.Text = Xtfhcsfz
            End If
        End If
        
        Valilock = False
        
        If Ydtext.Visible Then
            Ydtext.SetFocus
        End If
        
    End With
    
End Sub

Private Sub Form_Resize()                                                '窗体大小发生变化时,重新显示文本框
    
    Call Cxxswbk
    
End Sub

Private Function Fun_Drfrmyxxpd() As Boolean                             '调入其它窗体或功能产生的有效性判断(包括数据回写)
    
    Fun_Drfrmyxxpd = True
    
    With WglrGrid
        '如果当前网格处于编辑状态,则先进行数据回写再进行有效性判断
        
        If Ydtext.Visible Or YdCombo.Visible Then
            Call Lrsjhx
            If Not sjzdyxxpd(Dqlrwgh, Dqlrwgl) Then
                Fun_Drfrmyxxpd = False
                Exit Function
            End If
        End If
        
        '进行行有效性判断
        If Not Sjhzyxxpd(.Row) Then
            Fun_Drfrmyxxpd = False
            Exit Function
        End If
    End With
    
End Function

Private Sub WglrGrid_EnterCell()                                                 '显示当前数据行相关信息
    
    With WglrGrid
        If .Row >= .FixedRows Then
            Lab_Row = Trim(Str(.Row - .FixedRows + 1))
        End If
    End With
    
End Sub

Private Sub WglrGrid_GotFocus()                                     '网格得到焦点
    
    '网格得到焦点,如果当前选择行为非数据行
    '则调整当前焦点至有效数据行
    
    With WglrGrid
        If .Row < .FixedRows And .Rows > .FixedRows Then
            changelock = True
            .Select .FixedRows, .Col
            changelock = False
        End If
        If .Col < Qslz Then
            changelock = True
            .Select .Row, Qslz
            changelock = False
        End If
    End With
    
End Sub

Private Sub WglrGrid_LostFocus()                                    '录入网格失去焦点
    
    '用以屏蔽调用其它窗体时发生网格失去焦点事件
    If changelock Then
        Exit Sub
    End If
    
    '引发网格RowcolChange事件
    With WglrGrid
        If Not (Ydtext.Visible Or YdCombo.Visible) Then
            .Select 0, 0
        End If
    End With
    
End Sub

Private Sub WglrGrid_AfterScroll(ByVal OldTopRow As Long, ByVal OldLeftCol As Long, ByVal NewTopRow As Long, ByVal NewLeftCol As Long)                                       '限制用户在录入过程中滚动鼠标
    
    If Gdtlock Then
        Exit Sub
    End If
    
    With WglrGrid
        If Ydtext.Visible Or YdCombo.Visible Then
            Gdtlock = True
            .TopRow = Dqtoprow
            .LeftCol = Dqleftcol
            Gdtlock = False
            Exit Sub
        End If
    End With
    
End Sub

Private Sub WglrGrid_LeaveCell()                                    '离开单元格
    
    If changelock Then
        Exit Sub
    End If
    
    '记录刚刚离开网格单元的行列值
    Dqlkwgh = WglrGrid.Row
    Dqlkwgl = WglrGrid.Col
    
    '判断是否需要录入数据回写
    If Not (Ydtext.Visible Or YdCombo.Visible) Then
        Exit Sub
    End If
    
    Call Lrsjhx
    
End Sub

Private Sub WglrGrid_RowColChange()                                '网格录入行列发生变化时,进行有效性判断
    
    Valilock = True       '屏蔽文本框失去焦点进行有效性判断
    
    With WglrGrid
        If changelock Then
            Exit Sub
        End If
        If Not sjzdyxxpd(Dqlrwgh, Dqlrwgl) Then
            Exit Sub
        End If
        If .Row <> Dqlkwgh Then
            If Not Sjhzyxxpd(Dqlkwgh) Then
                Exit Sub
            End If
        End If
    End With
    
    Call fhyxh
    Call Xldql
    
End Sub

Private Sub WglrGrid_DblClick()          '鼠标双击网格显示文本框
    
    With WglrGrid
        If .Row >= .Rows - 1 Then
            If .Col <> Sydz("004", GridStr(), Szzls) And .Col <> Sydz("005", GridStr(), Szzls) Then
                Call xswbk
            End If
        Else
            Call xswbk
        End If
    End With
    
End Sub

Private Sub Ycwbk()                      '隐藏文本框,帮助按钮,列表组合框
    
    Valilock = True