sam7.mac

atmel at91sam7x256 下的mass storage .可插入mmc /sd 卡作为U盘用 ,开发环境为IAR4.31 .见文中说明

// - ----------------------------------------------------------------------------
// -          ATMEL Microcontroller Software Support  -  ROUSSET  -
// - ----------------------------------------------------------------------------
// -  DISCLAIMER:  THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
// -  IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
// -  MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
// -  DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
// -  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
// -  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
// -  OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
// -  LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
// -  NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
// -  EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
// - ----------------------------------------------------------------------------
// File Name           : SAM7.mac
// - ----------------------------------------------------------------------------
//  User setup file for CSPY debugger to simulate interrupt
//  driven Fibonacchi data input. 
//  1.1 16/Jun/04 JPP    : Creation
//
//  $Revision: 1.1 $
//
// ---------------------------------------------------------

__var __mac_i;
__var __mac_pt;

execUserPreload()
{
  //*  Set the RAM memory at 0x0020 0000 for code AT 0 flash area 
  CheckRemap();
  //*  Get the Chip ID (AT91C_DBGU_C1R & AT91C_DBGU_C2R
  __mac_i =__readMemory32(0xFFFFF240,"Memory");
  __message " ---------------------------------------- Chip ID   0x",__mac_i:%X;  
  __mac_i =__readMemory32(0xFFFFF244,"Memory");
  __message " ---------------------------------------- Extention 0x",__mac_i:%X;  
  //* Get the chip status

  //* Init AIC
  AIC();
  //*  Watchdog Disable
  Watchdog();
}


//-----------------------------------------------------------------------------
// Watchdog
//-------------------------------
// Normally, the Watchdog is enable at the reset for load it's preferable to
// Disable.
//-----------------------------------------------------------------------------
Watchdog()
{
  //* Watchdog Disable
  //      AT91C_BASE_WDTC->WDTC_WDMR= AT91C_WDTC_WDDIS;
  __writeMemory32(0x00008000,0xFFFFFD44,"Memory");
  __message "------------------------------- Watchdog Disable ----------------------------------------";  
}


//-----------------------------------------------------------------------------
// Check Remap
//-----------------------------------------------------------------------------
CheckRemap()
{
  //* Read the value at 0x0
  __mac_i =__readMemory32(0x00000000,"Memory");
  __mac_i =__mac_i+1;
  __writeMemory32(__mac_i,0x00,"Memory");
  __mac_pt =__readMemory32(0x00000000,"Memory");

  if (__mac_i == __mac_pt)  
  {
    __message "------------------------------- The Remap is done ----------------------------------------";  
    //*   Toggel RESET The remap
    __writeMemory32(0x00000001,0xFFFFFF00,"Memory");
  }
  else
  {  
    __message "------------------------------- The Remap is NOT -----------------------------------------";  
  }
}


execUserSetup()
{
  ini();
  __message "-------------------------------Set PC ----------------------------------------";  
  __writeMemory32(0x00000000,0xB4,"Register");
}



//-----------------------------------------------------------------------------
// Reset the Interrupt Controller
//-------------------------------
// Normally, the code is executed only if a reset has been actually performed.
// So, the AIC initialization resumes at setting up the default vectors.
//-----------------------------------------------------------------------------
AIC()
{
  // Mask All interrupt pAic->AIC_IDCR = 0xFFFFFFFF;
  __writeMemory32(0xffffffff,0xFFFFF124,"Memory");

  __writeMemory32(0xffffffff,0xFFFFF128,"Memory");
  // disable peripheral clock  Peripheral Clock Disable Register
  __writeMemory32(0xffffffff,0xFFFFFC14,"Memory");

  // #define AT91C_TC0_SR    ((AT91_REG *) 	0xFFFA0020) // (TC0) Status Register
  // #define AT91C_TC1_SR    ((AT91_REG *) 	0xFFFA0060) // (TC1) Status Register
  // #define AT91C_TC2_SR    ((AT91_REG *) 	0xFFFA00A0) // (TC2) Status Register
  // #define AT91C_TC3_SR    ((AT91_REG *) 	0xFFFA4020) // (TC3) Status Register
  // #define AT91C_TC4_SR    ((AT91_REG *) 	0xFFFA4060) // (TC4) Status Register
  // #define AT91C_TC5_SR    ((AT91_REG *) 	0xFFFA40A0) // (TC5) Status Register
  // #define AT91C_TC6_SR    ((AT91_REG *) 	0xFFFA8020) // (TC6) Status Register
  // #define AT91C_TC7_SR    ((AT91_REG *) 	0xFFFA8060) // (TC7) Status Register
  // #define AT91C_TC8_SR    ((AT91_REG *) 	0xFFFA80A0) // (TC8) Status Register
  __readMemory32(0xFFFA0020,"Memory");
  __readMemory32(0xFFFA0060,"Memory");
  __readMemory32(0xFFFA00A0,"Memory");
  __readMemory32(0xFFFA4020,"Memory");
  __readMemory32(0xFFFA4060,"Memory");
  __readMemory32(0xFFFA40A0,"Memory");
  __readMemory32(0xFFFA8020,"Memory");
  __readMemory32(0xFFFA8060,"Memory");
  __readMemory32(0xFFFA80A0,"Memory");

  for (__mac_i=0;__mac_i < 8; __mac_i++)
  {
  // AT91C_BASE_AIC->AIC_EOICR
  __mac_pt  =  __readMemory32(0xFFFFF130,"Memory");

  }
  __message "------------------------------- AIC 2 INIT ---------------------------------------------";  
}


//-----------------------------------------------------------------------------
// INI
//-----------------------------------------------------------------------------
ini()
{
  __writeMemory32(0x0,0x00,"Register");
  __writeMemory32(0x0,0x04,"Register");
  __writeMemory32(0x0,0x08,"Register");
  __writeMemory32(0x0,0x0C,"Register");
  __writeMemory32(0x0,0x10,"Register");
  __writeMemory32(0x0,0x14,"Register");
  __writeMemory32(0x0,0x18,"Register");
  __writeMemory32(0x0,0x1C,"Register");
  __writeMemory32(0x0,0x20,"Register");
  __writeMemory32(0x0,0x24,"Register");
  __writeMemory32(0x0,0x28,"Register");
  __writeMemory32(0x0,0x2C,"Register");
  __writeMemory32(0x0,0x30,"Register");
  __writeMemory32(0x0,0x34,"Register");
  __writeMemory32(0x0,0x38,"Register");

  // Set CPSR
  __writeMemory32(0x0D3,0x98,"Register");
}

//-----------------------------------------------------------------------------
// RG
//-----------------------------------------------------------------------------
RG()
{
  __mac_i =__readMemory32(0x00,"Register");   __message "R00 0x",__mac_i:%X;  
  __mac_i =__readMemory32(0x04,"Register");   __message "R01 0x",__mac_i:%X;  
  __mac_i =__readMemory32(0x08,"Register");   __message "R02 0x",__mac_i:%X;  
  __mac_i =__readMemory32(0x0C,"Register");   __message "R03 0x",__mac_i:%X;  
  __mac_i =__readMemory32(0x10,"Register");   __message "R04 0x",__mac_i:%X;  
  __mac_i =__readMemory32(0x14,"Register");   __message "R05 0x",__mac_i:%X;  
  __mac_i =__readMemory32(0x18,"Register");   __message "R06 0x",__mac_i:%X;  
  __mac_i =__readMemory32(0x1C,"Register");   __message "R07 0x",__mac_i:%X;  
  __mac_i =__readMemory32(0x20,"Register");   __message "R08 0x",__mac_i:%X;  
  __mac_i =__readMemory32(0x24,"Register");   __message "R09 0x",__mac_i:%X;  
  __mac_i =__readMemory32(0x28,"Register");   __message "R10 0x",__mac_i:%X;  
  __mac_i =__readMemory32(0x2C,"Register");   __message "R11 0x",__mac_i:%X;  
  __mac_i =__readMemory32(0x30,"Register");   __message "R12 0x",__mac_i:%X;  
  __mac_i =__readMemory32(0x34,"Register");   __message "R13 0x",__mac_i:%X;  
  __mac_i =__readMemory32(0x38,"Register");   __message "R14 0x",__mac_i:%X;  
  __mac_i =__readMemory32(0x3C,"Register");   __message "R13 SVC 0x",__mac_i:%X;  
  __mac_i =__readMemory32(0x40,"Register");   __message "R14 SVC 0x",__mac_i:%X;  
  __mac_i =__readMemory32(0x44,"Register");   __message "R13 ABT 0x",__mac_i:%X;  
  __mac_i =__readMemory32(0x48,"Register");   __message "R14 ABT 0x",__mac_i:%X;  
  __mac_i =__readMemory32(0x4C,"Register");   __message "R13 UND 0x",__mac_i:%X;  
  __mac_i =__readMemory32(0x50,"Register");   __message "R14 UND 0x",__mac_i:%X;  
  __mac_i =__readMemory32(0x54,"Register");   __message "R13 IRQ 0x",__mac_i:%X;  
  __mac_i =__readMemory32(0x58,"Register");   __message "R14 IRQ 0x",__mac_i:%X;  
  __mac_i =__readMemory32(0x5C,"Register");   __message "R08 FIQ 0x",__mac_i:%X;  
  __mac_i =__readMemory32(0x60,"Register");   __message "R09 FIQ 0x",__mac_i:%X;  
  __mac_i =__readMemory32(0x64,"Register");   __message "R10 FIQ 0x",__mac_i:%X;  
  __mac_i =__readMemory32(0x68,"Register");   __message "R11 FIQ 0x",__mac_i:%X;  
  __mac_i =__readMemory32(0x6C,"Register");   __message "R12 FIQ 0x",__mac_i:%X;  
  __mac_i =__readMemory32(0x70,"Register");   __message "R13 FIQ 0x",__mac_i:%X;  
  __mac_i =__readMemory32(0x74,"Register");   __message "R14 FIQ0x",__mac_i:%X; 
  __mac_i =__readMemory32(0x98,"Register");   __message "CPSR     ",__mac_i:%X; 
  __mac_i =__readMemory32(0x94,"Register");   __message "SPSR     ",__mac_i:%X; 
  __mac_i =__readMemory32(0x9C,"Register");   __message "SPSR ABT ",__mac_i:%X; 
  __mac_i =__readMemory32(0xA0,"Register");   __message "SPSR ABT ",__mac_i:%X; 
  __mac_i =__readMemory32(0xA4,"Register");   __message "SPSR UND ",__mac_i:%X; 
  __mac_i =__readMemory32(0xA8,"Register");   __message "SPSR IRQ ",__mac_i:%X; 
  __mac_i =__readMemory32(0xAC,"Register");   __message "SPSR FIQ ",__mac_i:%X; 

  __mac_i =__readMemory32(0xB4,"Register");   __message "PC 0x",__mac_i:%X;  
}