⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 fpu_arith.c

📁 freebsd v4.4内核源码
💻 C
字号:
/* *  fpu_arith.c * * Code to implement the FPU register/register arithmetic instructions * * * Copyright (C) 1992,1993,1994 *                       W. Metzenthen, 22 Parker St, Ormond, Vic 3163, *                       Australia.  E-mail   billm@vaxc.cc.monash.edu.au * All rights reserved. * * This copyright notice covers the redistribution and use of the * FPU emulator developed by W. Metzenthen. It covers only its use * in the 386BSD, FreeBSD and NetBSD operating systems. Any other * use is not permitted under this copyright. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright *    notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must include information specifying *    that source code for the emulator is freely available and include *    either: *      a) an offer to provide the source code for a nominal distribution *         fee, or *      b) list at least two alternative methods whereby the source *         can be obtained, e.g. a publically accessible bulletin board *         and an anonymous ftp site from which the software can be *         downloaded. * 3. All advertising materials specifically mentioning features or use of *    this emulator must acknowledge that it was developed by W. Metzenthen. * 4. The name of W. Metzenthen may not be used to endorse or promote *    products derived from this software without specific prior written *    permission. * * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL * W. METZENTHEN BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * * * The purpose of this copyright, based upon the Berkeley copyright, is to * ensure that the covered software remains freely available to everyone. * * The software (with necessary differences) is also available, but under * the terms of the GNU copyleft, for the Linux operating system and for * the djgpp ms-dos extender. * * W. Metzenthen   June 1994. * * * $FreeBSD: src/sys/gnu/i386/fpemul/fpu_arith.c,v 1.5.2.1 1999/09/05 08:09:36 peter Exp $ * */#include <sys/param.h>#include <sys/proc.h>#include <machine/cpu.h>#include <machine/pcb.h>#include <gnu/i386/fpemul/fpu_emu.h>#include <gnu/i386/fpemul/fpu_system.h>#include <gnu/i386/fpemul/control_w.h>voidfadd__(){	/* fadd st,st(i) */	reg_add(FPU_st0_ptr, &st(FPU_rm), FPU_st0_ptr, control_word);}voidfmul__(){	/* fmul st,st(i) */	reg_mul(FPU_st0_ptr, &st(FPU_rm), FPU_st0_ptr, control_word);}voidfsub__(){	/* fsub st,st(i) */	reg_sub(FPU_st0_ptr, &st(FPU_rm), FPU_st0_ptr, control_word);}voidfsubr_(){	/* fsubr st,st(i) */	reg_sub(&st(FPU_rm), FPU_st0_ptr, FPU_st0_ptr, control_word);}voidfdiv__(){	/* fdiv st,st(i) */	reg_div(FPU_st0_ptr, &st(FPU_rm), FPU_st0_ptr, control_word);}voidfdivr_(){	/* fdivr st,st(i) */	reg_div(&st(FPU_rm), FPU_st0_ptr, FPU_st0_ptr, control_word);}voidfadd_i(){	/* fadd st(i),st */	reg_add(FPU_st0_ptr, &st(FPU_rm), &st(FPU_rm), control_word);}voidfmul_i(){	/* fmul st(i),st */	reg_mul(&st(FPU_rm), FPU_st0_ptr, &st(FPU_rm), control_word);}voidfsubri(){	/* fsubr st(i),st */	/* This is the sense of the 80486 manual reg_sub(&st(FPU_rm),	 * FPU_st0_ptr, &st(FPU_rm), control_word); */	reg_sub(FPU_st0_ptr, &st(FPU_rm), &st(FPU_rm), control_word);}voidfsub_i(){	/* fsub st(i),st */	/* This is the sense of the 80486 manual reg_sub(FPU_st0_ptr,	 * &st(FPU_rm), &st(FPU_rm), control_word); */	reg_sub(&st(FPU_rm), FPU_st0_ptr, &st(FPU_rm), control_word);}voidfdivri(){	/* fdivr st(i),st */	reg_div(FPU_st0_ptr, &st(FPU_rm), &st(FPU_rm), control_word);}voidfdiv_i(){	/* fdiv st(i),st */	reg_div(&st(FPU_rm), FPU_st0_ptr, &st(FPU_rm), control_word);}voidfaddp_(){	/* faddp st(i),st */	reg_add(FPU_st0_ptr, &st(FPU_rm), &st(FPU_rm), control_word);	pop();}voidfmulp_(){	/* fmulp st(i),st */	reg_mul(&st(FPU_rm), FPU_st0_ptr, &st(FPU_rm), control_word);	pop();}voidfsubrp(){	/* fsubrp st(i),st */	/* This is the sense of the 80486 manual reg_sub(&st(FPU_rm),	 * FPU_st0_ptr, &st(FPU_rm), control_word); */	reg_sub(FPU_st0_ptr, &st(FPU_rm), &st(FPU_rm), control_word);	pop();}voidfsubp_(){	/* fsubp st(i),st */	/* This is the sense of the 80486 manual reg_sub(FPU_st0_ptr,	 * &st(FPU_rm), &st(FPU_rm), control_word); */	reg_sub(&st(FPU_rm), FPU_st0_ptr, &st(FPU_rm), control_word);	pop();}voidfdivrp(){	/* fdivrp st(i),st */	reg_div(FPU_st0_ptr, &st(FPU_rm), &st(FPU_rm), control_word);	pop();}voidfdivp_(){	/* fdivp st(i),st */	reg_div(&st(FPU_rm), FPU_st0_ptr, &st(FPU_rm), control_word);	pop();}

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -