📄 cnt1000.fit
字号:
-- MAX+plus II Compiler Fit File
-- Version 10.2 07/10/2002
-- Compiled: 08/08/2003 16:33:25
-- Copyright (C) 1988-2002 Altera Corporation
-- Any megafunction design, and related net list (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only to
-- program PLD devices (but not masked PLD devices) from Altera. Any other
-- use of such megafunction design, net list, support information, device
-- programming or simulation file, or any other related documentation or
-- information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner. Title to
-- the intellectual property, including patents, copyrights, trademarks,
-- trade secrets, or maskworks, embodied in any such megafunction design,
-- net list, support information, device programming or simulation file, or
-- any other related documentation or information provided by Altera or a
-- megafunction partner, remains with Altera, the megafunction partner, or
-- their respective licensors. No other licenses, including any licenses
-- needed under any third party's intellectual property, are provided herein.
CHIP "cnt1000"
BEGIN
DEVICE = "EPF10K10LC84-4";
"clk" : INPUT_PIN = 1 ;
"en" : INPUT_PIN = 42 ;
"reset" : INPUT_PIN = 2 ;
"carry1" : OUTPUT_PIN = 49 ;
"q0" : OUTPUT_PIN = 65 ;
"q1" : OUTPUT_PIN = 22 ;
"q2" : OUTPUT_PIN = 24 ;
"q3" : OUTPUT_PIN = 66 ;
"q4" : OUTPUT_PIN = 23 ;
"q5" : OUTPUT_PIN = 21 ;
"q6" : OUTPUT_PIN = 25 ;
"q7" : OUTPUT_PIN = 67 ;
"q8" : OUTPUT_PIN = 64 ;
"|LPM_ADD_SUB:226|addcore:adder|:171" : LOCATION = LC7_B10;
"|LPM_ADD_SUB:226|addcore:adder|:179" : LOCATION = LC2_B5 ;
"|LPM_ADD_SUB:226|addcore:adder|:187" : LOCATION = LC6_B5 ;
"|LPM_ADD_SUB:226|addcore:adder|:191" : LOCATION = LC2_B3 ;
"|LPM_ADD_SUB:226|addcore:adder|:199" : LOCATION = LC3_B3 ;
"|LPM_ADD_SUB:226|addcore:adder|:203" : LOCATION = LC3_B9 ;
"|LPM_ADD_SUB:226|addcore:adder|:211" : LOCATION = LC8_B9 ;
"|LPM_ADD_SUB:226|addcore:adder|:219" : LOCATION = LC4_B22;
"|LPM_ADD_SUB:226|addcore:adder|:227" : LOCATION = LC1_B22;
"|LPM_ADD_SUB:226|addcore:adder|:231" : LOCATION = LC2_B19;
"|LPM_ADD_SUB:226|addcore:adder|:239" : LOCATION = LC8_B17;
"|LPM_ADD_SUB:226|addcore:adder|:243" : LOCATION = LC6_B18;
"|LPM_ADD_SUB:226|addcore:adder|:251" : LOCATION = LC2_B18;
"|LPM_ADD_SUB:226|addcore:adder|:255" : LOCATION = LC5_B12;
"|LPM_ADD_SUB:226|addcore:adder|:263" : LOCATION = LC2_B12;
"|LPM_ADD_SUB:226|addcore:adder|:267" : LOCATION = LC3_B8 ;
"|LPM_ADD_SUB:226|addcore:adder|:275" : LOCATION = LC1_B8 ;
"|LPM_ADD_SUB:226|addcore:adder|:279" : LOCATION = LC6_B11;
"reset~1" : LOCATION = LC7_B15;
":14" : LOCATION = LC8_B15; -- ca
":24" : LOCATION = LC8_B11; -- q100031
":25" : LOCATION = LC1_B15; -- q100030
":26" : LOCATION = LC5_B15; -- q100029
":27" : LOCATION = LC6_B8 ; -- q100028
":28" : LOCATION = LC4_B8 ; -- q100027
":29" : LOCATION = LC2_B8 ; -- q100026
":30" : LOCATION = LC3_B12; -- q100025
":31" : LOCATION = LC1_B12; -- q100024
":32" : LOCATION = LC6_B12; -- q100023
":33" : LOCATION = LC8_B18; -- q100022
":34" : LOCATION = LC5_B18; -- q100021
":35" : LOCATION = LC4_B19; -- q100020
":36" : LOCATION = LC7_B17; -- q100019
":37" : LOCATION = LC5_B17; -- q100018
":38" : LOCATION = LC3_B19; -- q100017
":39" : LOCATION = LC2_B17; -- q100016
":40" : LOCATION = LC8_B22; -- q100015
":41" : LOCATION = LC6_B22; -- q100014
":42" : LOCATION = LC1_B19; -- q100013
":43" : LOCATION = LC4_B9 ; -- q100012
":44" : LOCATION = LC1_B9 ; -- q100011
":45" : LOCATION = LC2_B9 ; -- q100010
":46" : LOCATION = LC5_B3 ; -- q10009
":47" : LOCATION = LC7_B3 ; -- q10008
":48" : LOCATION = LC1_B3 ; -- q10007
":49" : LOCATION = LC8_B5 ; -- q10006
":50" : LOCATION = LC1_B5 ; -- q10005
":51" : LOCATION = LC4_B5 ; -- q10004
":52" : LOCATION = LC2_B10; -- q10003
":53" : LOCATION = LC6_B10; -- q10002
":54" : LOCATION = LC1_B10; -- q10001
":55" : LOCATION = LC5_B10; -- q10000
"~156~1" : LOCATION = LC2_B11;
"~156~2" : LOCATION = LC3_B11;
"~156~3" : LOCATION = LC4_B11;
"~156~4" : LOCATION = LC5_B11;
"~156~5" : LOCATION = LC1_B11;
"~156~6" : LOCATION = LC3_B18;
"~156~7" : LOCATION = LC1_B17;
"~156~8" : LOCATION = LC3_B22;
"~156~9" : LOCATION = LC4_B17;
"~156~10" : LOCATION = LC1_B18;
":456" : LOCATION = LC7_B11;
":465" : LOCATION = LC4_B15;
":474" : LOCATION = LC3_B15;
":483" : LOCATION = LC5_B8 ;
":492" : LOCATION = LC8_B8 ;
":501" : LOCATION = LC7_B8 ;
":510" : LOCATION = LC7_B12;
":519" : LOCATION = LC4_B12;
":528" : LOCATION = LC8_B12;
":537" : LOCATION = LC7_B18;
":546" : LOCATION = LC4_B18;
":555" : LOCATION = LC7_B19;
":564" : LOCATION = LC6_B17;
":573" : LOCATION = LC3_B17;
":582" : LOCATION = LC5_B19;
":591" : LOCATION = LC2_B22;
":600" : LOCATION = LC7_B22;
":609" : LOCATION = LC5_B22;
":618" : LOCATION = LC6_B19;
":627" : LOCATION = LC5_B9 ;
":636" : LOCATION = LC7_B9 ;
":645" : LOCATION = LC6_B9 ;
":654" : LOCATION = LC4_B3 ;
"~654~1" : LOCATION = LC2_B15;
":663" : LOCATION = LC8_B3 ;
":672" : LOCATION = LC6_B3 ;
":681" : LOCATION = LC7_B5 ;
":690" : LOCATION = LC5_B5 ;
":699" : LOCATION = LC3_B5 ;
":708" : LOCATION = LC8_B10;
":717" : LOCATION = LC4_B10;
":726" : LOCATION = LC3_B10;
":855" : LOCATION = LC6_B15;
END;
INTERNAL_INFO "cnt1000"
BEGIN
DEVICE = EPF10K10LC84-4;
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -