sine_32.fit

用cpld开发的激光控制器的源码

-- MAX+plus II Compiler Fit File      
-- Version 10.2 07/10/2002            
-- Compiled: 05/19/2006 15:27:04      

-- Copyright (C) 1988-2002 Altera Corporation
-- Any megafunction design, and related net list (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only to
-- program PLD devices (but not masked PLD devices) from Altera.  Any other
-- use of such megafunction design, net list, support information, device
-- programming or simulation file, or any other related documentation or
-- information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner.  Title to
-- the intellectual property, including patents, copyrights, trademarks,
-- trade secrets, or maskworks, embodied in any such megafunction design,
-- net list, support information, device programming or simulation file, or
-- any other related documentation or information provided by Altera or a
-- megafunction partner, remains with Altera, the megafunction partner, or
-- their respective licensors.  No other licenses, including any licenses
-- needed under any third party's intellectual property, are provided herein.

CHIP "sine_32"
BEGIN

    DEVICE = "EPM7032SLC44-5";

    "clk"                          : INPUT_PIN  = 43     ;
    "rst"                          : INPUT_PIN  = 5      ; -- LC2
    "sel"                          : INPUT_PIN  = 4      ; -- LC1
    "data_out0"                    : OUTPUT_PIN = 26     ; -- LC30
    "data_out1"                    : OUTPUT_PIN = 27     ; -- LC29
    "data_out2"                    : OUTPUT_PIN = 34     ; -- LC23
    "data_out3"                    : OUTPUT_PIN = 9      ; -- LC6
    "data_out4"                    : OUTPUT_PIN = 8      ; -- LC5
    "data_out5"                    : OUTPUT_PIN = 39     ; -- LC19
    "data_out6"                    : OUTPUT_PIN = 33     ; -- LC24
    "data_out7"                    : OUTPUT_PIN = 37     ; -- LC21
    "q_3"                          : OUTPUT_PIN = 41     ; -- LC17
    "|LPM_ADD_SUB:107|addcore:adder|addcore:adder0|result_node3" : LOCATION   = LC22   ; -- PIN 36
    "|LPM_ADD_SUB:107|addcore:adder|addcore:adder0|result_node4" : LOCATION   = LC20   ; -- PIN 38
    ":13"                          : LOCATION   = LC18   ; -- PIN 40  -- cnt4
    ":15"                          : LOCATION   = LC3    ; -- PIN 6  -- cnt2
    ":16"                          : LOCATION   = LC1    ; -- PIN 4  -- cnt1
    ":17"                          : LOCATION   = LC2    ; -- PIN 5  -- cnt0
    "~3988~1"                      : LOCATION   = LC32   ; -- PIN 24
    "~4000~1"                      : LOCATION   = LC31   ; -- PIN 25
    "~4006~1"                      : LOCATION   = LC25   ; -- PIN 32
    "~4012~1"                      : LOCATION   = LC26   ; -- PIN 31
    "~4012~2"                      : LOCATION   = LC27   ; -- PIN 29
    "~4018~1"                      : LOCATION   = LC28   ; -- PIN 28

END;

INTERNAL_INFO "sine_32"
BEGIN
	DEVICE = EPM7032SLC44-5;
	LC17    : LORAX = "G13R0,PA7R0C1,PA7R0C0";
	LC21    : LORAX = "G30R0";
	LC24    : LORAX = "G33R0";
	LC19    : LORAX = "G15R0";
	LC5     : LORAX = "G26R0";
	LC6     : LORAX = "G27R0";
	LC23    : LORAX = "G32R0";
	LC29    : LORAX = "G55R0";
	LC30    : LORAX = "G56R0";
	LC18    : LORAX = "G14R0,PA5R0C0,PA5R0C1";
	LC3     : LORAX = "G11R0,PA3R0C1,PA3R0C0";
	LC1     : LORAX = "G9R0,PA2R0C0,PA2R0C1";
	LC2     : LORAX = "G10R0,PA1R0C0,PA6R0C1";
	OH1R0P5 : LORAX = "G44R0,PA19R0C0,PA19R0C1";
	LC20    : LORAX = "G16R0,PA1R0C1";
	LC22    : LORAX = "G31R0,PA14R0C1";
	OH0R0P4 : LORAX = "G43R0,PA20R0C0,PA20R0C1";
	LC26    : LORAX = "G39R0,PA25R0C1";
	LC31    : LORAX = "G57R0,PA28R0C0";
	LC25    : LORAX = "G38R0,PA18R0C0";
	LC32    : LORAX = "G58R0,PA29R0C1";
	LC28    : LORAX = "G41R0,PA22R0C1";
	LC27    : LORAX = "G40R0,PA24R0C1";
END;