rfc1593.txt

著名的RFC文档,其中有一些文档是已经翻译成中文的的.

              session routing."

        ::=  { ibmappnNnUniqueInfoAndCaps 7 }

  ibmappnNodeNnFrsn             OBJECT-TYPE
        SYNTAX INTEGER (0..65535)
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION
            "Flow reduction sequence numbers (FRSNs) are associated
             with Topology Database Updates (TDUs) and are unique
             only within each APPN network node.  A TDU can be
             associated with multiple APPN resources. This object
             is the last FRSN sent in a topology update to
             adjacent network nodes."

        ::=  { ibmappnNnUniqueInfoAndCaps 8 }


  -- **************************************************************
  -- APPN End Node Information

  ibmappnNodeEnSegGen     OBJECT-TYPE
        SYNTAX INTEGER {yes(1), no(2)}
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION
            "Indicates whether this end node supports segment generation."




McKenzie & Cheng                                                [Page 8]

RFC 1593                   SNA APPN Node MIB                  March 1994


        ::=  { ibmappnEnUniqueCaps 1 }

  ibmappnNodeEnModeCosMap    OBJECT-TYPE
        SYNTAX INTEGER {yes(1), no(2)}
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION
             "Indicates whether this end node supports
              mode name to COS name mapping."

        ::=  { ibmappnEnUniqueCaps 2 }

  ibmappnNodeEnLocateCdinit  OBJECT-TYPE
        SYNTAX INTEGER {yes(1), no(2)}
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION
             "Indicates whether this end node supports Locate Cdinit."

        ::=  { ibmappnEnUniqueCaps 3 }

  ibmappnNodeEnSendRegNames OBJECT-TYPE
        SYNTAX INTEGER {yes(1), no(2)}
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION
             "Indicates whether the node will register its LUs with the
              adjacent serving network node:

                NO  - do not register names
                YES - register names"

        ::=  { ibmappnEnUniqueCaps 4 }

  ibmappnNodeEnSendRegChar OBJECT-TYPE
        SYNTAX INTEGER {yes(1), no(2)}
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION
             "Indicates whether this node supports
              send register characteristics, which is only
              supported when send registered names is also
              supported."

        ::=  { ibmappnEnUniqueCaps 5 }






McKenzie & Cheng                                                [Page 9]

RFC 1593                   SNA APPN Node MIB                  March 1994


  -- **************************************************************
  -- APPN Port information
  --


  ibmappnNodePortTable OBJECT-TYPE
        SYNTAX SEQUENCE OF IbmappnNodePortEntry
        ACCESS not-accessible
        STATUS mandatory
        DESCRIPTION
             "The Port table describes the configuration and current
              status of the ports used by APPN.  The type of DLC is
              included in this table as a pointer to the DLC port
              specific tables."

        ::= { ibmappnPortInformation 1 }

  ibmappnNodePortEntry OBJECT-TYPE
        SYNTAX IbmappnNodePortEntry
        ACCESS not-accessible
        STATUS mandatory
        DESCRIPTION
             "The Port Name is used as the index to this table."

        INDEX
               { ibmappnNodePortName }

        ::= { ibmappnNodePortTable 1 }

  IbmappnNodePortEntry ::= SEQUENCE {
        ibmappnNodePortName            DisplayString,
        ibmappnNodePortState           INTEGER,

        ibmappnNodePortDlcType         INTEGER,
        ibmappnNodePortPortType        INTEGER,
        ibmappnNodePortSIMRIM          INTEGER,
        ibmappnNodePortLsRole          INTEGER,
        ibmappnNodePortMaxRcvBtuSize   INTEGER,
        ibmappnNodePortMaxIframeWindow INTEGER,
        ibmappnNodePortDefLsGoodXids   Counter,
        ibmappnNodePortDefLsBadXids    Counter,
        ibmappnNodePortDynLsGoodXids   Counter,
        ibmappnNodePortDynLsBadXids    Counter,
        ibmappnNodePortSpecific        OBJECT IDENTIFIER
                                     }


  ibmappnNodePortName OBJECT-TYPE



McKenzie & Cheng                                               [Page 10]

RFC 1593                   SNA APPN Node MIB                  March 1994


        SYNTAX DisplayString (SIZE (1..8))
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION
            "Administratively-assigned name for this APPN port.
             The name can be from one to eight characters."

        ::=  { ibmappnNodePortEntry 1 }

  ibmappnNodePortState        OBJECT-TYPE
        SYNTAX INTEGER    {
                           inactive(1),
                           pendactive(2),
                           active(3),
                           pendinact(4)
                           }
        ACCESS read-write
        STATUS mandatory
        DESCRIPTION
             "Indicates the current state of this port."

        ::=  { ibmappnNodePortEntry 2 }

  ibmappnNodePortDlcType OBJECT-TYPE
        SYNTAX INTEGER {
                        other(1),          -- none of the following
                        sdlc(2),
                        dls(3),
                        socket(4),
                        ethernet(5),
                        tokenRing(6)
                       }
            ACCESS  read-only
            STATUS  mandatory
            DESCRIPTION
                    "The type of DLC interface, distinguished according
                    to the protocol immediately 'below' this layer."

        ::=  { ibmappnNodePortEntry 3 }

  ibmappnNodePortPortType  OBJECT-TYPE
        SYNTAX INTEGER {
                       leased(1),
                       switched(2),
                       sharedAccessFacilities(3)
                }
        ACCESS read-only
        STATUS mandatory



McKenzie & Cheng                                               [Page 11]

RFC 1593                   SNA APPN Node MIB                  March 1994


        DESCRIPTION
             "Identifies the type of line used by this port."

        ::=  { ibmappnNodePortEntry 4 }

  ibmappnNodePortSIMRIM  OBJECT-TYPE
        SYNTAX INTEGER {yes(1), no(2)}
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION
             "Indicates whether Set Initialization Mode (SIM) and
              Receive Initialization Mode (RIM) are supported."

        ::=  { ibmappnNodePortEntry 5 }

  ibmappnNodePortLsRole OBJECT-TYPE
        SYNTAX INTEGER {
                       primary(1),
                       secondary(2),
                       negotiable(3),
                       abm(4)
               }
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION
            "Initial role for LSs activated through this port,
             where 'abm' indicates asynchronous balance mode."

        ::=  { ibmappnNodePortEntry 6 }

  ibmappnNodePortMaxRcvBtuSize OBJECT-TYPE
        SYNTAX INTEGER
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION
            "Maximum Basic Transmission Size (BTU) that a
             link station on this port can receive."

        ::=  { ibmappnNodePortEntry 7 }

  ibmappnNodePortMaxIframeWindow OBJECT-TYPE
        SYNTAX INTEGER
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION
            "Maximum number of I-frames that can be received
             by the XID sender before an acknowledgement is received."




McKenzie & Cheng                                               [Page 12]

RFC 1593                   SNA APPN Node MIB                  March 1994


        ::=  { ibmappnNodePortEntry 8 }

  ibmappnNodePortDefLsGoodXids    OBJECT-TYPE
      SYNTAX  Counter
      ACCESS  read-only
      STATUS  mandatory
      DESCRIPTION
              "The total number of successfull XIDs that have occurred
               on all defined link stations on this port since the last
               time this port was started."

        ::=  { ibmappnNodePortEntry 9 }

  ibmappnNodePortDefLsBadXids    OBJECT-TYPE
      SYNTAX  Counter
      ACCESS  read-only
      STATUS  mandatory
      DESCRIPTION
              "The total number of unsuccessfull XIDs that have occurred
               on all defined link stations on this port since the last
               time this port was started."

        ::=  { ibmappnNodePortEntry 10 }

  ibmappnNodePortDynLsGoodXids    OBJECT-TYPE
      SYNTAX  Counter
      ACCESS  read-only
      STATUS  mandatory
      DESCRIPTION
              "The total number of successfull XIDs that have occurred
               on all dynamic link stations on this port since the last
               time this port was started."

        ::=  { ibmappnNodePortEntry 11 }

  ibmappnNodePortDynLsBadXids    OBJECT-TYPE
      SYNTAX  Counter
      ACCESS  read-only
      STATUS  mandatory
      DESCRIPTION
              "The total number of unsuccessfull XIDs that have occurred
               on all dynamic link stations on this port since the last
               time this port was started."

        ::=  { ibmappnNodePortEntry 12 }

  ibmappnNodePortSpecific OBJECT-TYPE
        SYNTAX OBJECT IDENTIFIER



McKenzie & Cheng                                               [Page 13]

RFC 1593                   SNA APPN Node MIB                  March 1994


        ACCESS read-only
        STATUS mandatory
        DESCRIPTION
             "Identifies the port specific OBJECT IDENTIFIER
              that can provide additional information."

        ::=  { ibmappnNodePortEntry 13 }



  -- **************************************************************
  --
  --

  ibmappnNodePortIpTable OBJECT-TYPE
        SYNTAX SEQUENCE OF IbmappnNodePortIpEntry
        ACCESS not-accessible
        STATUS mandatory
        DESCRIPTION
             "Port table (TCP/IP specific)."

        ::= { ibmappnPortInformation 2 }

  ibmappnNodePortIpEntry OBJECT-TYPE
        SYNTAX IbmappnNodePortIpEntry
        ACCESS not-accessible
        STATUS mandatory
        DESCRIPTION
             "The IP Name is used as the index to this table."

        INDEX
               {ibmappnNodePortIpName }

        ::= { ibmappnNodePortIpTable 1 }

  IbmappnNodePortIpEntry ::= SEQUENCE {
        ibmappnNodePortIpName         DisplayString,
        ibmappnNodePortIpPortNum      INTEGER
                                     }

  ibmappnNodePortIpName OBJECT-TYPE
        SYNTAX DisplayString (SIZE (1..8))
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION
            "Administratively-assigned name for this APPN port.
             The name can be from one to eight characters."




McKenzie & Cheng                                               [Page 14]

RFC 1593                   SNA APPN Node MIB                  March 1994


        ::=  { ibmappnNodePortIpEntry 1 }

  ibmappnNodePortIpPortNum OBJECT-TYPE
        SYNTAX INTEGER
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION
             "Local TCP/IP port number."

        ::=  { ibmappnNodePortIpEntry 2 }



  -- **************************************************************
  --
  --

  ibmappnNodePortDlsTable OBJECT-TYPE
        SYNTAX SEQUENCE OF IbmappnNodePortDlsEntry
        ACCESS not-accessible
        STATUS mandatory
        DESCRIPTION
             "Port table (DLS specific)."

        ::= { ibmappnPortInformation 3 }

  ibmappnNodePortDlsEntry OBJECT-TYPE
        SYNTAX IbmappnNodePortDlsEntry
        ACCESS not-accessible
        STATUS mandatory
        DESCRIPTION
             "The DLS Name is used as the index to this table."

        INDEX
               {ibmappnNodePortDlsName }

        ::= { ibmappnNodePortDlsTable 1 }

  IbmappnNodePortDlsEntry ::= SEQUENCE {
        ibmappnNodePortDlsName         DisplayString,
        ibmappnNodePortDlsMac          OCTET STRING,
        ibmappnNodePortDlsSap          OCTET STRING
                                     }