rfc137.txt

著名的RFC文档,其中有一些文档是已经翻译成中文的的.

Network Working Group                                   T. C. O'Sullivan
Request for Comments: 137                                       Raytheon
NIC 6714                                                   30 April 1971


                            TELNET Protocol

   This is a request for comment and is being distributed in advance of
   the Atlantic City meetings for review and comment prior to or during
   discussions on TELNET in preparation for issuing an official
   document.

   It is also being distributed so that selected installations planning
   to implement early versions of TELNET will have a common basis for
   such implementation.

   The proposed document is the result of the work of the committee.  It
   represents a TELNET protocol felt to be adequate for initial
   implementation.  A few recent suggestions by committee members and
   others have been incorporated where even though not thoroughly
   cleared with all members, the chairman felt that they clarified the
   protocol or would tend to simplify implementation but not
   substantially change the agreed-upon approach.

   Readers are referenced to the following previous releases of
   information:

   1. Conventions for Using an IBM 2741 Terminal or a User Console for
      Access to Network Server HOSTS
         Joel Winett, RFC 110 (NIC #5809)

   2. Level III Server Protocol for the Lincoln Laboratory 360/67 HOST
         Joel Winett, RFC 109 (NIC #5808)

   3. First Cut at a Proposed TELNET Protocol
         J. Melvin, D. Watson, RFC 97 (NIC #5740)

   4. ASCII Format for Network Interchange
         V. Cerf, RFC 20 (NIC# 4722)

   Another RFC will be distributed prior to the Atlantic City Meetings
   containing many of the arguments supporting the proposal.









O'Sullivan                                                      [Page 1]

RFC 137                     TELNET Protocol                   April 1971


                            TELNET PROTOCOL



                          A Proposed Document



                T. O'Sullivan for the TELNET Committee

               Will Crowther                 BBN
               Bob Long                      SDC
               John Melvin                   SRI-ARC
               Bob Metcalf                   Harvard
               Ed Meyer                      MAC
               Tom O'Sullivan (Chairman)     Raytheon
               Joel Winett                   MIT-LL


































O'Sullivan                                                      [Page 2]

RFC 137                     TELNET Protocol                   April 1971


   TELNET is a third-level protocol, the function of which is to make a
   terminal (or process) at a using site appear to the system or a
   process at a serving site as logically equivalent to a terminal
   "directly" connected to the serving site.  In performing this
   function, the protocol attempts to minimize the amount of information
   each HOST must keep about the characteristics of other HOSTS.

   Definitions

   Protocol Levels (see Figure 1)

      Level 1

         HOST-IMP protocol specified by BBN in NIC 5735, Specifications
         for the Interconnection of a HOST, and an IMP (BBN Report 1822)

      Level 2

         HOST-HOST protocol performed by NCPs as described in Document
         Number 1 (NIC 5413) and subsequent amendments, see RFC 107 (NIC
         #5806)

            One view of the NCP's function is that it takes information
            from the net and routes it to receiving processes via
            mechanisms internal to each HOST; conversely, processes use
            the NCP, via internal system calls, to have information
            routed to other processes in the net (via the other
            processes' NCPs).

      Level 3 (see Figure 2)

         Level 3 is, by definition, the place to which and from which
         the NCP communicates internally in its own host.

            This level may be equivalent to the user process level in
            some systems, but this may not be the case in all systems.
            In using sites, the TELNET process operates at this level.
            In serving sites, the TELNET server operates at this level.

   Initial Connection Protocol (ICP)

      An agreed-upon sequence of level 3 exchanges between two processes
      which is, in general, used to synchronize the dialogue between the
      processes, e.g., RFC 80 (NIC #5608) #1.







O'Sullivan                                                      [Page 3]

RFC 137                     TELNET Protocol                   April 1971


   Serving Site

      The HOST into which the TELNET process is directing the user's
      keyboard input and from which the TELNET process is receiving
      control information and data effecting the user's terminal.  At
      the serving site, a TELNET server is executing.

   Using Site

      The HOST in which the TELNET process is executing.

   Sending Site

      The HOST transmitting data, could be either using site or serving
      site.

   Receiving Site

      Converse of sending site.

   User

      The person or process "driving" the TELNET process.

   In providing services the TELNET protocol will use established
   network conventions, specifically the Network Control Program, and
   Initial Connection Protocol referenced in the above definitions.

   The TELNET protocol provides for a Network Virtual Terminal (NVT)
   through which users may transmit and receive data over connections
   between the using site and the serving site.

   The code of the NVT will be full ASCII.  The seven-bit code will be
   transmitted in eight-bit bytes, the high order bit set to zero.

   It will be the responsibility of the using site to provide its users
   with a means of producing all 128 ASCII codes, as well as a selected
   set of special TELNET control signals (see Figure 3).













O'Sullivan                                                      [Page 4]

RFC 137                     TELNET Protocol                   April 1971


   The ASCII character ESC will be employed by the user as an escape
   signal indicating that the next character(s) has special meaning.
   The meaning assigned to escape code will be serving site defined and
   therefore may not be consistant across the network.

   It will be the responsibility of the serving site to specify for
   users how the NVT code will be used to represent the codes normally
   generated by a local terminal.  The serving sites specification of
   this representation is expected, where reasonable, to map on a one-
   for-one basis for ASCII graphics and controls that are provided
   through local terminals.  The serving site will also specify how the
   escape conventions will be interpreted by the system.

   The end of a line will be represented in the NVT as carriage return
   followed by line feed.

   The protocol assumes that at initially the serving site will not
   provide any echo to the using site.

   Each TELNET control signal for which code must be sent over the
   connection will be represented in the NVT by an eight-bit code, with
   the high order bit set to one.  Following are the special codes
   established to date. (U) indicates that in most implementations the
   user would be expected to have the ability to signal the TELNET
   process from his terminal to initiate the code.

   Code X'A0'

      Source:  Both Sites (U)
      Meaning: A DATA TYPE[1] signal indicating that code will be
               transmitted by NVT, i.e., using the seven-bit ASCII
               conventions.

   Code X'80'

      Source:  Using Site (U)
      Meaning: Order using site NCP to send an INS and insert X'80' in
               data stream.

   Code X'81'

      Source:  Using Site (U)
      Meaning: Break or Attention








O'Sullivan                                                      [Page 5]

RFC 137                     TELNET Protocol                   April 1971


   Code X'82'

      Source:  Serving System
      Meaning: Reverse Break

   Code X'83'

      Source:  Both Sites
      Meaning: I Echo

   Code X'84'

      Source:  Both Sites
      Meaning: You Echo

   Code X'85'

      Reserved

   Code X'86'

      Reserved

   Code X'87'