rfc1512.txt

著名的RFC文档,其中有一些文档是已经翻译成中文的的.

              DESCRIPTION
                      "The timer, expressed in seconds, used in the
                      Neighbor Notification protocol. It has a range of
                      2 seconds to 30 seconds, and its default value is
                      30 seconds (refer to ANSI SMT 8.2)."
              REFERENCE
                      "ANSI { fddiSMT 29 }"
              ::= { fddimibSMTEntry 15 }

          fddimibSMTStatRptPolicy OBJECT-TYPE
              SYNTAX  INTEGER { true(1), false(2) }
              ACCESS  read-write
              STATUS  mandatory
              DESCRIPTION
                      "If true, indicates that the node will generate
                      Status Reporting Frames for its implemented events
                      and conditions. It has an initial value of true.
                      This variable determines the value of the
                      SR_Enable Flag (refer to ANSI SMT 8.3.2.1)."
              REFERENCE
                      "ANSI { fddiSMT 30 }"
              ::= { fddimibSMTEntry 16 }

          fddimibSMTTraceMaxExpiration OBJECT-TYPE
              SYNTAX  FddiTimeMilli
              ACCESS  read-write
              STATUS  mandatory
              DESCRIPTION
                      "Reference Trace_Max (refer to ANSI SMT
                      9.4.4.2.2)."
              REFERENCE
                      "ANSI { fddiSMT 31 }"
              ::= { fddimibSMTEntry 17 }

          fddimibSMTBypassPresent OBJECT-TYPE
              SYNTAX  INTEGER { true(1), false(2) }
              ACCESS  read-only
              STATUS  mandatory
              DESCRIPTION
                      "A flag indicating if the station has a bypass on
                      its AB port pair."
              REFERENCE
                      "ANSI { fddiSMT 34 }"
              ::= { fddimibSMTEntry 18 }

          fddimibSMTECMState OBJECT-TYPE
              SYNTAX  INTEGER {
                          ec0(1), -- Out



Case & Rijsinghani                                             [Page 13]

RFC 1512                        FDDI MIB                  September 1993


                          ec1(2), -- In
                          ec2(3), -- Trace
                          ec3(4), -- Leave
                          ec4(5), -- Path_Test
                          ec5(6), -- Insert
                          ec6(7), -- Check
                          ec7(8)  -- Deinsert
                      }
              ACCESS  read-only
              STATUS  mandatory
              DESCRIPTION
                      "Indicates the current state of the ECM state
                      machine (refer to ANSI SMT 9.5.2)."
              REFERENCE
                      "ANSI { fddiSMT 41 }"
              ::= { fddimibSMTEntry 19 }

          fddimibSMTCFState OBJECT-TYPE
              SYNTAX  INTEGER {
                          cf0(1),   -- isolated
                          cf1(2),   -- local_a
                          cf2(3),   -- local_b
                          cf3(4),   -- local_ab
                          cf4(5),   -- local_s
                          cf5(6),   -- wrap_a
                          cf6(7),   -- wrap_b
                          cf7(8),   -- wrap_ab
                          cf8(9),   -- wrap_s
                          cf9(10),  -- c_wrap_a
                          cf10(11), -- c_wrap_b
                          cf11(12), -- c_wrap_s
                          cf12(13)  -- thru
                      }
              ACCESS  read-only
              STATUS  mandatory
              DESCRIPTION
                      "The attachment configuration for the station or
                      concentrator (refer to ANSI SMT 9.7.2.2)."
              REFERENCE
                      "ANSI { fddiSMT 42 }"
              ::= { fddimibSMTEntry 20 }

          fddimibSMTRemoteDisconnectFlag OBJECT-TYPE
              SYNTAX  INTEGER { true(1), false(2) }
              ACCESS  read-only
              STATUS  mandatory
              DESCRIPTION
                      "A flag indicating that the station was remotely



Case & Rijsinghani                                             [Page 14]

RFC 1512                        FDDI MIB                  September 1993


                      disconnected from the network as a result of
                      receiving an fddiSMTAction, disconnect (refer to
                      ANSI SMT 6.4.5.3) in a Parameter Management Frame.
                      A station requires a Connect Action to rejoin and
                      clear the flag (refer to ANSI SMT 6.4.5.2)."
              REFERENCE
                      "ANSI { fddiSMT 44 }"
              ::= { fddimibSMTEntry 21 }

          fddimibSMTStationStatus OBJECT-TYPE
              SYNTAX  INTEGER { concatenated(1), separated(2), thru(3) }
              ACCESS  read-only
              STATUS  mandatory
              DESCRIPTION
                      "The current status of the primary and secondary
                      paths within this station."
              REFERENCE
                      "ANSI { fddiSMT 45 }"
              ::= { fddimibSMTEntry 22 }

          fddimibSMTPeerWrapFlag OBJECT-TYPE
              SYNTAX  INTEGER { true(1), false(2) }
              ACCESS  read-only
              STATUS  mandatory
              DESCRIPTION
                      "This variable assumes the value of the
                      PeerWrapFlag in CFM (refer to ANSI SMT
                      9.7.2.4.4)."
              REFERENCE
                      "ANSI { fddiSMT 46 }"
              ::= { fddimibSMTEntry 23 }

          fddimibSMTTimeStamp OBJECT-TYPE
              SYNTAX  FddiTimeMilli
              ACCESS  read-only
              STATUS  mandatory
              DESCRIPTION
                      "This variable assumes the value of TimeStamp
                      (refer to ANSI SMT 8.3.2.1)."
              REFERENCE
                      "ANSI { fddiSMT 51 }"
              ::= { fddimibSMTEntry 24 }

          fddimibSMTTransitionTimeStamp OBJECT-TYPE
              SYNTAX  FddiTimeMilli
              ACCESS  read-only
              STATUS  mandatory
              DESCRIPTION



Case & Rijsinghani                                             [Page 15]

RFC 1512                        FDDI MIB                  September 1993


                      "This variable assumes the value of
                      TransitionTimeStamp (refer to ANSI SMT 8.3.2.1)."
              REFERENCE
                      "ANSI { fddiSMT 52 }"
              ::= { fddimibSMTEntry 25 }

          fddimibSMTStationAction OBJECT-TYPE
              SYNTAX  INTEGER {
                          other(1),               -- none of the following
                          connect(2),
                          disconnect(3),
                          path-Test(4),
                          self-Test(5),
                          disable-a(6),
                          disable-b(7),
                          disable-m(8)
                      }
              ACCESS  read-write
              STATUS  mandatory
              DESCRIPTION
                      "This object, when read, always returns a value of
                      other(1).  The behavior of setting this variable
                      to each of the acceptable values is as follows:

                           other(1): Results in an appropriate error.
                           connect(2): Generates a Connect signal to ECM
                                to begin a connection sequence. See ANSI
                                Ref 9.4.2.
                           disconnect(3): Generates a Disconnect signal
                                to ECM. see ANSI Ref 9.4.2.
                           path-Test(4): Initiates a station Path_Test.
                                The Path_Test variable (see ANSI Ref
                                9.4.1) is set to 'Testing'. The results
                                of this action are not specified in this
                                standard.
                           self-Test(5): Initiates a station Self_Test.
                                The results of this action are not
                                specified in this standard.
                           disable-a(6): Causes a PC_Disable on the A
                                port if the A port mode is peer.
                           disable-b(7): Causes a PC_Disable on the B
                                port if the B port mode is peer.
                           disable-m(8): Causes a PC_Disable on all M
                                ports.

                      Attempts to set this object to all other values
                      results in an appropriate error.  The result of
                      setting this variable to path-Test(4) or self-



Case & Rijsinghani                                             [Page 16]

RFC 1512                        FDDI MIB                  September 1993


                      Test(5) is implementation-specific."
              REFERENCE
                      "ANSI { fddiSMT 60 }"
              ::= { fddimibSMTEntry 26 }


          -- the MAC group
          -- Implementation of the MAC Group is mandatory for all
          -- systems which implement manageable FDDI subsystems.

          fddimibMACNumber OBJECT-TYPE
              SYNTAX  INTEGER (0..65535)
              ACCESS  read-only
              STATUS  mandatory
              DESCRIPTION
                      "The total number of MAC implementations (across
                      all SMTs) on this network management application
                      entity.  The value for this variable must remain
                      constant at least from one re-initialization of
                      the entity's network management system to the next
                      re-initialization."
              ::= { fddimibMAC  1 }


          -- the MAC table

          fddimibMACTable OBJECT-TYPE
              SYNTAX  SEQUENCE OF FddimibMACEntry
              ACCESS  not-accessible
              STATUS  mandatory
              DESCRIPTION
                      "A list of MAC entries.  The number of entries
                      shall not exceed the value of fddimibMACNumber."
              ::= { fddimibMAC  2 }

          fddimibMACEntry OBJECT-TYPE
              SYNTAX  FddimibMACEntry
              ACCESS  not-accessible
              STATUS  mandatory
              DESCRIPTION
                      "A MAC entry containing information common to a
                      given MAC."
              INDEX   { fddimibMACSMTIndex, fddimibMACIndex }
              ::= { fddimibMACTable 1 }

          FddimibMACEntry ::=
              SEQUENCE {
                  fddimibMACSMTIndex



Case & Rijsinghani                                             [Page 17]

RFC 1512                        FDDI MIB                  September 1993


                          INTEGER,
                  fddimibMACIndex
                          INTEGER,
                  fddimibMACIfIndex
                          INTEGER,
                  fddimibMACFrameStatusFunctions
                          INTEGER,
                  fddimibMACTMaxCapability
                          FddiTimeNano,
                  fddimibMACTVXCapability
                          FddiTimeNano,
                  fddimibMACAvailablePaths
                          INTEGER,
                  fddimibMACCurrentPath
                          INTEGER,
                  fddimibMACUpstreamNbr
                          FddiMACLongAddressType,
                  fddimibMACDownstreamNbr
                          FddiMACLongAddressType,
                  fddimibMACOldUpstreamNbr
                          FddiMACLongAddressType,
                  fddimibMACOldDownstreamNbr
                          FddiMACLongAddressType,
                  fddimibMACDupAddressTest
                          INTEGER,
                  fddimibMACRequestedPaths
                          INTEGER,
                  fddimibMACDownstreamPORTType
                          INTEGER,
                  fddimibMACSMTAddress
                          FddiMACLongAddressType,
                  fddimibMACTReq
                          FddiTimeNano,
                  fddimibMACTNeg
                          FddiTimeNano,
                  fddimibMACTMax
                          FddiTimeNano,
                  fddimibMACTvxValue
                          FddiTimeNano,
                  fddimibMACFrameCts
                          Counter,
                  fddimibMACCopiedCts
                          Counter,
                  fddimibMACTransmitCts
                          Counter,
                  fddimibMACErrorCts
                          Counter,
                  fddimibMACLostCts



Case & Rijsinghani                                             [Page 18]

RFC 1512                        FDDI MIB                  September 1993


                          Counter,
                  fddimibMACFrameErrorThreshold
                          INTEGER,