rfc1566.txt

著名的RFC文档,其中有一些文档是已经翻译成中文的的.

   -- outbound transmission in some way. In the most extreme case
   -- information will be maintained for each different entity that
   -- receives messages and for each entity the MTA stores messages for
   -- and delivers messages to.  Other MTAs may elect to treat all
   -- reception equally, all queue storage equally, all deliveries
   -- equally, or some combination of this.

   -- In any case, a grouping abstraction is an extremely useful for
   -- breaking down the activities of an MTA. For purposes of labelling
   -- this will be called a "group" in this MIB.








Kille & Freed                                                   [Page 7]

RFC 1566                  Mail Monitoring MIB               January 1994


   -- Each group contains all the variables needed to monitor all aspects
   -- of an MTA's operation.  However, the fact that all groups contain
   -- all possible variables does not imply that all groups must use all
   -- possible variables. For example, a single group might be used to
   -- monitor only one kind of event (inbound processing, outbound
   -- processing, or storage). In this sort of configuration all unused
   -- counters would be inaccessible; e.g., returning either a
   -- noSuchName error (for an SNMPv1 get), or a noSuchInstance
   -- exception (for an SNMPv2 get).

   -- Groups are not necessarily mutually exclusive. A given event may
   -- be recorded by more than one group, a message may be seen as
   -- stored by more than one group, and so on.  Groups should be all
   -- inclusive, however: if groups are implemented all aspects of an
   -- MTA's operation should be registered in at least one group. This
   -- freedom lets implementors use different sets of groups to
   -- provide differents "views" of an MTA.

   -- The possibility of overlap between groups means that summing
   -- variables across groups may not produce values equal to those in
   -- the mtaTable. mtaTable should always provide accurate information
   -- about the MTA as a whole.

   -- The term "channel" is often used in MTA implementations; channels
   -- are usually, but not always, equivalent to a group. However,
   -- this MIB does not use the term "channel" because there is no
   -- requirement that an MTA supporting this MIB has to map its
   -- "channel" abstraction one-to-one onto the MIB's group abstration.

   mtaGroupTable OBJECT-TYPE
       SYNTAX SEQUENCE OF MtaGroupEntry
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
         "The table holding information specific to each MTA group."
       ::= {mta 2}

   mtaGroupEntry OBJECT-TYPE
       SYNTAX MtaGroupEntry
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
         "The entry associated with each MTA group."
       INDEX {applIndex, mtaGroupIndex}
       ::= {mtaGroupTable 1}






Kille & Freed                                                   [Page 8]

RFC 1566                  Mail Monitoring MIB               January 1994


   MtaGroupEntry ::= SEQUENCE {
       mtaGroupIndex
           INTEGER,
       mtaGroupReceivedMessages
           Counter32,
       mtaGroupRejectedMessages
           Counter32,
       mtaGroupStoredMessages
           Gauge32,
       mtaGroupTransmittedMessages
           Counter32,
       mtaGroupReceivedVolume
           Counter32,
       mtaGroupStoredVolume
           Gauge32,
       mtaGroupTransmittedVolume
           Counter32,
       mtaGroupReceivedRecipients
           Counter32,
       mtaGroupStoredRecipients
           Gauge32,
       mtaGroupTransmittedRecipients
           Counter32,
       mtaGroupOldestMessageStored
           TimeInterval,
       mtaGroupInboundAssociations
           Gauge32,
       mtaGroupOutboundAssociations
           Gauge32,
       mtaGroupAccumulatedInboundAssociations
           Counter32,
       mtaGroupAccumulatedOutboundAssociations
           Counter32,
       mtaGroupLastInboundActivity
           TimeInterval,
       mtaGroupLastOutboundActivity
           TimeInterval,
       mtaGroupRejectedInboundAssociations
           Counter32,
       mtaGroupFailedOutboundAssociations
           Counter32,
       mtaGroupInboundRejectionReason
           DisplayString,
       mtaGroupOutboundConnectFailureReason
           DisplayString,
       mtaGroupScheduledRetry
           TimeInterval,
       mtaGroupMailProtocol



Kille & Freed                                                   [Page 9]

RFC 1566                  Mail Monitoring MIB               January 1994


           OBJECT IDENTIFIER,
       mtaGroupName
           DisplayString
   }

   mtaGroupIndex OBJECT-TYPE
       SYNTAX INTEGER (1..2147483647)
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
         "The index associated with a group for a given MTA."
       ::= {mtaGroupEntry 1}

   mtaGroupReceivedMessages OBJECT-TYPE
       SYNTAX Counter32
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
         "The number of messages received to this group since MTA
         initialization."
       ::= {mtaGroupEntry 2}

   mtaGroupRejectedMessages OBJECT-TYPE
       SYNTAX Counter32
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
         "The number of messages rejected by this group since MTA
         initialization."
       ::= {mtaGroupEntry 3}

   mtaGroupStoredMessages OBJECT-TYPE
       SYNTAX Gauge32
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
         "The total number of messages currently stored in this
         group's queue."
       ::= {mtaGroupEntry 4}

   mtaGroupTransmittedMessages OBJECT-TYPE
       SYNTAX Counter32
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
         "The number of messages transmitted by this group since MTA
         initialization."
       ::= {mtaGroupEntry 5}



Kille & Freed                                                  [Page 10]

RFC 1566                  Mail Monitoring MIB               January 1994


   mtaGroupReceivedVolume OBJECT-TYPE
       SYNTAX Counter32
       UNITS "K-octets"
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
         "The total volume of messages received to this group since
         MTA initialization, measured in kilo-octets.  This volume
         should include all transferred data that is logically above
         the mail transport protocol level.  For example, an
         SMTP-based MTA should use the number of kilo-octets in the
         message header and body, while an X.400-based MTA should use
         the number of kilo-octets of P2 data."
       ::= {mtaGroupEntry 6}

   mtaGroupStoredVolume OBJECT-TYPE
       SYNTAX Gauge32
       UNITS "K-octets"
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
         "The total volume of messages currently stored in this
         group's queue, measured in kilo-octets.  This volume should
         include all stored data that is logically above the mail
         transport protocol level.  For example, an SMTP-based
         MTA should use the number of kilo-octets in the message
         header and body, while an X.400-based MTA would use the
         number of kilo-octets of P2 data."
       ::= {mtaGroupEntry 7}

   mtaGroupTransmittedVolume OBJECT-TYPE
       SYNTAX Counter32
       UNITS "K-octets"
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
         "The total volume of messages transmitted by this group
         since MTA initialization, measured in kilo-octets.  This
         volume should include all transferred data that is logically
         above the mail transport protocol level.  For example, an
         SMTP-based MTA should use the number of kilo-octets in the
         message header and body, while an X.400-based MTA should use
         the number of kilo-octets of P2 data."
       ::= {mtaGroupEntry 8}







Kille & Freed                                                  [Page 11]

RFC 1566                  Mail Monitoring MIB               January 1994


   mtaGroupReceivedRecipients OBJECT-TYPE
       SYNTAX Counter32
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
         "The total number of recipients specified in all messages
         received to this group since MTA initialization.
         Recipients this MTA had no responsibility for should not
         be counted."
       ::= {mtaGroupEntry 9}

   mtaGroupStoredRecipients OBJECT-TYPE
       SYNTAX Gauge32
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
         "The total number of recipients specified in all messages
         currently stored in this group's queue.  Recipients this
         MTA had no responsibility for should not be counted."
       ::= {mtaGroupEntry 10}

   mtaGroupTransmittedRecipients OBJECT-TYPE
       SYNTAX Counter32
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
         "The total number of recipients specified in all messages
         transmitted by this group since MTA initialization.
         Recipients this MTA had no responsibility for should not
         be counted."
       ::= {mtaGroupEntry 11}

   mtaGroupOldestMessageStored OBJECT-TYPE
       SYNTAX TimeInterval
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
         "Time since the oldest message in this group's queue was
          placed in the queue."
       ::= {mtaGroupEntry 12}











Kille & Freed                                                  [Page 12]

RFC 1566                  Mail Monitoring MIB               January 1994


   mtaGroupInboundAssociations OBJECT-TYPE
       SYNTAX Gauge32
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
         "The number of current associations to the group, where the
          group is the responder."
       ::= {mtaGroupEntry 13}

   mtaGroupOutboundAssociations OBJECT-TYPE
       SYNTAX Gauge32
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
         "The number of current associations to the group, where the
         group is the initiator."
       ::= {mtaGroupEntry 14}

   mtaGroupAccumulatedInboundAssociations OBJECT-TYPE
       SYNTAX Counter32
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
         "The total number of associations to the group since MTA
         initialization, where the group is the responder."
       ::= {mtaGroupEntry 15}

   mtaGroupAccumulatedOutboundAssociations OBJECT-TYPE
       SYNTAX Counter32
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
         "The total number of associations from the group since MTA
          initialization, where the group was the initiator."
       ::= {mtaGroupEntry 16}

   mtaGroupLastInboundActivity OBJECT-TYPE
       SYNTAX TimeInterval
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
         "Time since the last time that this group had an active
         inbound association for purposes of message reception."
       ::= {mtaGroupEntry 17}







Kille & Freed                                                  [Page 13]

RFC 1566                  Mail Monitoring MIB               January 1994


   mtaGroupLastOutboundActivity OBJECT-TYPE
       SYNTAX TimeInterval
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
         "Time since the last time that this group had an
         outbound association for purposes of message delivery."
       ::= {mtaGroupEntry 18}

   mtaGroupRejectedInboundAssociations OBJECT-TYPE
       SYNTAX Counter32
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
         "The total number of inbound associations the group has
         rejected, since MTA initialization."