rfc1559.txt

著名的RFC文档,其中有一些文档是已经翻译成中文的的.

DECnet Phase IV MIB Working Group                               [Page 7]

RFC 1559                  DECnet Phase IV MIB              December 1993


            "Information about the state of sessions between the
            node under study and the nodes found in the table."
        ::= { end 1 }

   phivEndRemoteEntry OBJECT-TYPE
        SYNTAX PhivEndRemoteEntry
        ACCESS not-accessible
        STATUS mandatory
        DESCRIPTION
            "Information about a particular remote node as seen
            from the end communication layer."
        INDEX  { phivEndRemoteHostNodeID }
        ::= { phivEndRemoteTable 1 }

   PhivEndRemoteEntry ::=
        SEQUENCE {
            phivEndRemoteHostNodeID
                PhivAddr,
            phivEndRemoteState
                INTEGER,
            phivEndCircuitIndex
                INTEGER,
            phivEndActiveLinks
                INTEGER,
            phivEndDelay
                INTEGER
        }

   phivEndRemoteHostNodeID OBJECT-TYPE
        SYNTAX PhivAddr -- OCTET STRING (SIZE (2))
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION
            "This value is the address of the remote node to be
            evaluated."
        ::= { phivEndRemoteEntry 1 }

   phivEndRemoteState OBJECT-TYPE
        SYNTAX INTEGER {
            on (1),
            off (2),
            shut (3),
            restricted (4)
        }
        ACCESS read-write
        STATUS mandatory
        DESCRIPTION
            "This represents the operational state of the remote node



DECnet Phase IV MIB Working Group                               [Page 8]

RFC 1559                  DECnet Phase IV MIB              December 1993


            being evaluated.
            The possible states are:

            ON          Allows logical links.
            OFF         Allows no new links, terminates existing
                        links, and stops routing traffic through.
            SHUT        Allows no new logical links, does not
                        destroy existing logical links, and goes
                        to the OFF state when all logical links are
                        gone.
            RESTRICTED  Allows no new incoming logical links from
                        other nodes.

            NOTE: These values are incremented by one compared to
            the standard DECnet values in order to maintain
            compliance with RFC 1155."
        ::= { phivEndRemoteEntry 2 }

   phivEndCircuitIndex OBJECT-TYPE
        SYNTAX INTEGER (1..65535)
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION
            "A unique index value for each known circuit used to
            communicate with the remote node.  This is the same
            value as phivCircuitIndex."
        ::= { phivEndRemoteEntry 3 }

   phivEndActiveLinks OBJECT-TYPE
        SYNTAX INTEGER (0..65535)
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION
            "This read-only parameter represents the number of active
            logical links from the executor to the destination node."
        ::= { phivEndRemoteEntry 4 }

   phivEndDelay OBJECT-TYPE
        SYNTAX INTEGER (0..65535)
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION
            "This read-only parameter is the average round trip
            delay in seconds to the destination node. This
            parameter is kept on a remote node basis."
        ::= { phivEndRemoteEntry 5 }

   -- End System Counter Table



DECnet Phase IV MIB Working Group                               [Page 9]

RFC 1559                  DECnet Phase IV MIB              December 1993



   phivEndCountTable OBJECT-TYPE
        SYNTAX SEQUENCE OF PhivEndCountEntry
        ACCESS not-accessible
        STATUS mandatory
        DESCRIPTION
            "Information about the counters associated with each end
            system that is known to the entity. These counters
            reflect totals from the perspective of the executor
            node."
        ::= { end 2 }

   phivEndCountEntry OBJECT-TYPE
        SYNTAX PhivEndCountEntry
        ACCESS not-accessible
        STATUS mandatory
        DESCRIPTION
            "Information about a particular session between two end
            systems."
        INDEX  { phivEndCountHostNodeID }
        ::= { phivEndCountTable 1 }

   PhivEndCountEntry ::=
        SEQUENCE {
            phivEndCountHostNodeID
                PhivAddr,
            phivEndCountSecsLastZeroed
                PhivCounter,
            phivEndCountUsrBytesRec
                PhivCounter,
            phivEndCountUsrBytesSent
                PhivCounter,
            phivEndUCountUsrMessRec
                PhivCounter,
            phivEndCountUsrMessSent
                PhivCounter,
            phivEndCountTotalBytesRec
                PhivCounter,
            phivEndCountTotalBytesSent
                PhivCounter,
            phivEndCountTotalMessRec
                PhivCounter,
            phivEndCountTotalMessSent
                PhivCounter,
            phivEndCountConnectsRecd
                PhivCounter,
            phivEndCountConnectsSent
                PhivCounter,



DECnet Phase IV MIB Working Group                              [Page 10]

RFC 1559                  DECnet Phase IV MIB              December 1993


            phivEndCountReponseTimeouts
                PhivCounter,
            phivEndCountRecdConnectResErrs
                PhivCounter
        }

   phivEndCountHostNodeID OBJECT-TYPE
        SYNTAX PhivAddr -- OCTET STRING (SIZE (2))
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION
            "This value is the address of the remote node to be
            evaluated."
        ::= { phivEndCountEntry 1 }

   phivEndCountSecsLastZeroed OBJECT-TYPE
        SYNTAX PhivCounter (0..65535)
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION
            "This value is the number of seconds that have elapsed
            since the counters for the node in this table row were
            last set to zero. This counter is located in the
            network management layer, but is returned with the
            end system information which follows."
        ::= { phivEndCountEntry 2 }

   phivEndCountUsrBytesRec OBJECT-TYPE
        SYNTAX PhivCounter (0..2147483647)
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION
            "Number of user bytes received from the target host."
        ::= { phivEndCountEntry 3 }

   phivEndCountUsrBytesSent OBJECT-TYPE
        SYNTAX PhivCounter (0..2147483647)
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION
            "Number of user bytes sent to the target host."
        ::= { phivEndCountEntry 4 }

   phivEndUCountUsrMessRec OBJECT-TYPE
        SYNTAX PhivCounter (0..2147483647)
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION



DECnet Phase IV MIB Working Group                              [Page 11]

RFC 1559                  DECnet Phase IV MIB              December 1993


            "Number of user messages received from the target host."
        ::= { phivEndCountEntry 5 }

   phivEndCountUsrMessSent OBJECT-TYPE
        SYNTAX PhivCounter (0..2147483647)
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION
            "Number of user messages sent to the target host."
        ::= { phivEndCountEntry 6 }

   phivEndCountTotalBytesRec OBJECT-TYPE
        SYNTAX PhivCounter (0..2147483647)
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION
            "Number of bytes received from the target host."
        ::= { phivEndCountEntry 7 }

   phivEndCountTotalBytesSent OBJECT-TYPE
        SYNTAX PhivCounter (0..2147483647)
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION
            "Number of bytes sent to the target host."
        ::= { phivEndCountEntry 8 }

   phivEndCountTotalMessRec OBJECT-TYPE
        SYNTAX PhivCounter (0..2147483647)
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION
            "Number of messages received from the target host."
        ::= { phivEndCountEntry 9 }

   phivEndCountTotalMessSent OBJECT-TYPE
        SYNTAX PhivCounter (0..2147483647)
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION
            "Number of messages sent to the target host."
        ::= { phivEndCountEntry 10 }

   phivEndCountConnectsRecd OBJECT-TYPE
        SYNTAX PhivCounter (0..65535)
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION



DECnet Phase IV MIB Working Group                              [Page 12]

RFC 1559                  DECnet Phase IV MIB              December 1993


            "Number of connects received from the target host."
        ::= { phivEndCountEntry 11 }

   phivEndCountConnectsSent OBJECT-TYPE
        SYNTAX PhivCounter (0..65535)
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION
            "Number of connects sent to the target host."
        ::= {phivEndCountEntry 12 }

   phivEndCountReponseTimeouts OBJECT-TYPE
        SYNTAX PhivCounter (0..65535)
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION
            "Number of response timeouts."
        ::= { phivEndCountEntry 13 }

   phivEndCountRecdConnectResErrs OBJECT-TYPE
        SYNTAX PhivCounter (0..65535)
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION
            "Number of received connect resource errors."
        ::= {phivEndCountEntry 14 }

   -- additional End System objects

   phivEndMaxLinks OBJECT-TYPE
        SYNTAX INTEGER (1..65535)
        ACCESS read-write
        STATUS mandatory
        DESCRIPTION
            "This value represents the maximum active logical
            link count allowed for the executor."
        ::= { end 3 }

   phivEndNSPVers OBJECT-TYPE
        SYNTAX DisplayString (SIZE (0..255))
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION
            "This read-only parameter represents the version number
            of the node End Communication S/W. The format is
            version number, ECO, and user ECO, e.g., 4.1.0"
        ::= { end 4 }




DECnet Phase IV MIB Working Group                              [Page 13]

RFC 1559                  DECnet Phase IV MIB              December 1993


   phivEndRetransmitFactor OBJECT-TYPE
        SYNTAX INTEGER (1..65535)
        ACCESS read-write
        STATUS mandatory
        DESCRIPTION
            "This value represents the maximum number of times the
            source End Communication at the executor node will
            restart the retransmission timer when it expires. If
            the number is exceeded, Session Control disconnects the
            logical link for the user."
        ::= { end 5 }

   phivEndDelayFact OBJECT-TYPE
        SYNTAX INTEGER (1..255)
        ACCESS read-write
        STATUS mandatory
        DESCRIPTION
            "This is the number by which to multiply one sixteenth
            of the estimated round trip delay to a node to set the
            retransmission timer to that node."
        ::= { end 6 }

   phivEndDelayWeight OBJECT-TYPE
        SYNTAX INTEGER (1..255)
        ACCESS read-write
        STATUS mandatory
        DESCRIPTION
            "This number represents the weight to apply to a
            current round trip delay estimate to a remote node
            when updating the estimated round trip delay to a node.
            On some systems the number must be 1 less than a power
            of 2 for computational efficiency."
        ::= { end 7 }

   phivEndInactivityTimer OBJECT-TYPE
        SYNTAX INTEGER (1..65535)
        ACCESS read-write
        STATUS mandatory
        DESCRIPTION
            "This value represents the maximum duration of inactivity
            (no data in either direction) on a logical link before
            the node checks to see if the logical link still works.
            If no activity occurs within the minimum number of
            seconds, End Communication generates artificial
            traffic to test the link (End Communication
            specification)."
        ::= { end 8 }