rfc2128.txt

著名的RFC文档,其中有一些文档是已经翻译成中文的的.

        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "This is the ifIndex value of the peer table entry
             to which this call was made. If a peer table entry
             for this call does not exist or is unknown, the value
             of this object will be zero."
        ::= { callActiveEntry 6 }

callActiveLogicalIfIndex OBJECT-TYPE
        SYNTAX      InterfaceIndexOrZero



Roeck                   Standards Track                        [Page 20]

RFC 2128                    Dial Control MIB                  March 1997


        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "This is the ifIndex value of the logical interface through
             which this call was made. For ISDN media, this would be
             the ifIndex of the B channel which was used for this call.
             If the ifIndex value is unknown, the value of this object
             will be zero."
        ::= { callActiveEntry 7 }

callActiveConnectTime OBJECT-TYPE
        SYNTAX      TimeStamp
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The value of sysUpTime when the call was connected.
             If the call is not connected, this object will have a
             value of zero."
        ::= { callActiveEntry 8 }

callActiveCallState OBJECT-TYPE
        SYNTAX      INTEGER {
            unknown(1),
            connecting(2),
            connected(3),
            active(4)
        }
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The current call state.
             unknown(1)     - The call state is unknown.
             connecting(2)  - A connection attempt (outgoing call)
                              is being made.
             connected(3)   - An incoming call is in the process
                              of validation.
             active(4)      - The call is active.
            "
        ::= { callActiveEntry 9 }

callActiveCallOrigin OBJECT-TYPE
        SYNTAX      INTEGER {
            originate(1),
            answer(2),
            callback(3)
        }
        MAX-ACCESS  read-only
        STATUS      current



Roeck                   Standards Track                        [Page 21]

RFC 2128                    Dial Control MIB                  March 1997


        DESCRIPTION
            "The call origin."
        ::= { callActiveEntry 10 }

callActiveChargedUnits OBJECT-TYPE
        SYNTAX      AbsoluteCounter32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The number of charged units for this connection.
             For incoming calls or if charging information is
             not supplied by the switch, the value of this object
             will be zero."
        ::= { callActiveEntry 11 }

callActiveInfoType OBJECT-TYPE
        SYNTAX      INTEGER {
            other(1),                   -- e.g. for non-isdn media
            speech(2),
            unrestrictedDigital(3),     -- 64k/s data
            unrestrictedDigital56(4),   -- with 56k rate adaption
            restrictedDigital(5),
            audio31(6),                 -- 3.1 kHz audio
            audio7(7),                  -- 7 kHz audio
            video(8),
            packetSwitched(9),
            fax(10)
        }
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The information type for this call."
        ::= { callActiveEntry 12 }

callActiveTransmitPackets OBJECT-TYPE
        SYNTAX      AbsoluteCounter32
        MAX-ACCESS  read-only
        STATUS     current
        DESCRIPTION
            "The number of packets which were transmitted for this
             call."
        ::= { callActiveEntry 13 }

callActiveTransmitBytes OBJECT-TYPE
        SYNTAX      AbsoluteCounter32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION



Roeck                   Standards Track                        [Page 22]

RFC 2128                    Dial Control MIB                  March 1997


            "The number of bytes which were transmitted for this
             call."
        ::= { callActiveEntry 14 }

callActiveReceivePackets OBJECT-TYPE
        SYNTAX      AbsoluteCounter32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The number of packets which were received for this
             call."
        ::= { callActiveEntry 15 }

callActiveReceiveBytes OBJECT-TYPE
        SYNTAX      AbsoluteCounter32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The number of bytes which were received for this call."
        ::= { callActiveEntry 16 }

--
-- the call history group
--

callHistory OBJECT IDENTIFIER ::= { dialControlMibObjects 4 }

callHistoryTableMaxLength OBJECT-TYPE
        SYNTAX      INTEGER (0..2147483647)
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "The upper limit on the number of entries that the
             callHistoryTable may contain.  A value of 0
             will prevent any history from being retained. When
             this table is full, the oldest entry will be deleted
             and the new one will be created."
        ::= { callHistory 1 }

callHistoryRetainTimer OBJECT-TYPE
        SYNTAX      INTEGER (0..2147483647)
        UNITS       "minutes"
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "The minimum amount of time that an callHistoryEntry
             will be maintained before being deleted. A value of
             0 will prevent any history from being retained in the



Roeck                   Standards Track                        [Page 23]

RFC 2128                    Dial Control MIB                  March 1997


             callHistoryTable, but will neither prevent callCompletion
             traps being generated nor affect other tables."
        ::= { callHistory 2 }

-- callHistoryTable
-- Table to store the past call information. The Destination number
-- and the call connect and disconnect time, the disconnection cause
-- are stored. These calls could be circuit switched or they could
-- be virtual circuits. History of each and every call is stored,
-- of successful calls as well as of unsuccessful and rejected calls.
-- An entry will be created when a call is cleared.

callHistoryTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF CallHistoryEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "A table containing information about specific
             calls to a specific destination."
        ::= { callHistory 3 }

callHistoryEntry OBJECT-TYPE
        SYNTAX      CallHistoryEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "The information regarding a single Connection."
        INDEX       { callActiveSetupTime, callActiveIndex }
        ::= { callHistoryTable 1 }


CallHistoryEntry ::=
        SEQUENCE {
            callHistoryPeerAddress               DisplayString,
            callHistoryPeerSubAddress            DisplayString,
            callHistoryPeerId                    INTEGER,
            callHistoryPeerIfIndex               INTEGER,
            callHistoryLogicalIfIndex            InterfaceIndex,
            callHistoryDisconnectCause           OCTET STRING,
            callHistoryDisconnectText            DisplayString,
            callHistoryConnectTime               TimeStamp,
            callHistoryDisconnectTime            TimeStamp,
            callHistoryCallOrigin                INTEGER,
            callHistoryChargedUnits              AbsoluteCounter32,
            callHistoryInfoType                  INTEGER,
            callHistoryTransmitPackets           AbsoluteCounter32,
            callHistoryTransmitBytes             AbsoluteCounter32,
            callHistoryReceivePackets            AbsoluteCounter32,



Roeck                   Standards Track                        [Page 24]

RFC 2128                    Dial Control MIB                  March 1997


            callHistoryReceiveBytes              AbsoluteCounter32
        }

callHistoryPeerAddress OBJECT-TYPE
        SYNTAX      DisplayString
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The number this call was connected to. If the number is
             not available, then it will have a length of zero."
        ::= { callHistoryEntry 1 }

callHistoryPeerSubAddress OBJECT-TYPE
        SYNTAX      DisplayString
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The subaddress this call was connected to. If the subaddress
             is undefined or not available, this will be a zero length
             string."
        ::= { callHistoryEntry 2 }

callHistoryPeerId OBJECT-TYPE
        SYNTAX      INTEGER (0..2147483647)
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "This is the Id value of the peer table entry
             to which this call was made. If a peer table entry
             for this call does not exist, the value of this object
             will be zero."
        ::= { callHistoryEntry 3 }

callHistoryPeerIfIndex OBJECT-TYPE
        SYNTAX      INTEGER (0..2147483647)
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "This is the ifIndex value of the peer table entry
             to which this call was made. If a peer table entry
             for this call does not exist, the value of this object
             will be zero."
        ::= { callHistoryEntry 4 }

callHistoryLogicalIfIndex OBJECT-TYPE
        SYNTAX      InterfaceIndex
        MAX-ACCESS  read-only
        STATUS      current



Roeck                   Standards Track                        [Page 25]

RFC 2128                    Dial Control MIB                  March 1997


        DESCRIPTION
            "This is the ifIndex value of the logical interface through
             which this call was made. For ISDN media, this would be
             the ifIndex of the B channel which was used for this call."
        ::= { callHistoryEntry 5 }

callHistoryDisconnectCause OBJECT-TYPE
        SYNTAX      OCTET STRING (SIZE (0..4))
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The encoded network cause value associated with this call.

             The value of this object will depend on the interface type
             as well as on the protocol and protocol version being
             used on this interface. Some references for possible cause
             values are given below."
        REFERENCE
            "- Bellcore SR-NWT-001953, Generic Guidelines for
               ISDN Terminal Equipment On Basic Access Interfaces,
               chapter 5.2.5.8.
             - Bellcore SR-NWT-002343, ISDN Primary Rate Interface
               Generic Guidelines for Customer Premises Equipment,
               chapter 8.2.5.8.
             - ITU-T Q.931, Appendix I.
             - ITU-T X.25, CAUSE and DIAGNOSTIC field values.
             - German Telekom FTZ 1TR6, chapter 3.2.3.4.4.4."
        ::= { callHistoryEntry 6 }

callHistoryDisconnectText OBJECT-TYPE
        SYNTAX      DisplayString
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "ASCII text describing the reason for call termination.

             This object exists because it would be impossible for
             a management station to store all possible cause values
             for all types of interfaces. It should be used only if
             a management station is unable to decode the value of
             dialCtlPeerStatsLastDisconnectCause."
        ::= { callHistoryEntry 7 }

callHistoryConnectTime OBJECT-TYPE
        SYNTAX      TimeStamp
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION



Roeck                   Standards Track                        [Page 26]

RFC 2128                    Dial Control MIB                  March 1997


            "The value of sysUpTime when the call was connected."
        ::= { callHistoryEntry 8 }

callHistoryDisconnectTime OBJECT-TYPE
        SYNTAX      TimeStamp
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The value of sysUpTime when the call was disconnected."
        ::= { callHistoryEntry 9 }

callHistoryCallOrigin OBJECT-TYPE
        SYNTAX      INTEGER {
            originate(1),