📄 configure
字号:
# Get rid of the leading space.
done
# When interrupted or exit'd, cleanup temporary files, and complete
# config.log. We remove comments because anyway the quotes in there
# would cause problems or look ugly.
trap 'exit_status=$?
# Save into config.log some information that might help in debugging.
echo >&5
echo "## ----------------- ##" >&5
echo "## Cache variables. ##" >&5
echo "## ----------------- ##" >&5
echo >&5
# The following way of writing the cache mishandles newlines in values,
{
(set) 2>&1 |
case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in
*ac_space=\ *)
sed -n \
"s/'"'"'/'"'"'\\\\'"'"''"'"'/g;
s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p"
;;
*)
sed -n \
"s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
;;
esac;
} >&5
sed "/^$/d" confdefs.h >conftest.log
if test -s conftest.log; then
echo >&5
echo "## ------------ ##" >&5
echo "## confdefs.h. ##" >&5
echo "## ------------ ##" >&5
echo >&5
cat conftest.log >&5
fi
(echo; echo) >&5
test "$ac_signal" != 0 &&
echo "$as_me: caught signal $ac_signal" >&5
echo "$as_me: exit $exit_status" >&5
rm -rf conftest* confdefs* core core.* *.core conf$$* $ac_clean_files &&
exit $exit_status
' 0
for ac_signal in 1 2 13 15; do
trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal
done
ac_signal=0
# confdefs.h avoids OS command line length limits that DEFS can exceed.
rm -rf conftest* confdefs.h
# AIX cpp loses on an empty file, so make sure it contains at least a newline.
echo >confdefs.h
# Let the site file select an alternate cache file if it wants to.
# Prefer explicitly selected file to automatically selected ones.
if test -z "$CONFIG_SITE"; then
if test "x$prefix" != xNONE; then
CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
else
CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
fi
fi
for ac_site_file in $CONFIG_SITE; do
if test -r "$ac_site_file"; then
{ echo "$as_me:838: loading site script $ac_site_file" >&5
echo "$as_me: loading site script $ac_site_file" >&6;}
cat "$ac_site_file" >&5
. "$ac_site_file"
fi
done
if test -r "$cache_file"; then
# Some versions of bash will fail to source /dev/null (special
# files actually), so we avoid doing that.
if test -f "$cache_file"; then
{ echo "$as_me:849: loading cache $cache_file" >&5
echo "$as_me: loading cache $cache_file" >&6;}
case $cache_file in
[\\/]* | ?:[\\/]* ) . $cache_file;;
*) . ./$cache_file;;
esac
fi
else
{ echo "$as_me:857: creating cache $cache_file" >&5
echo "$as_me: creating cache $cache_file" >&6;}
>$cache_file
fi
# Check that the precious variables saved in the cache have kept the same
# value.
ac_cache_corrupted=false
for ac_var in `(set) 2>&1 |
sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do
eval ac_old_set=\$ac_cv_env_${ac_var}_set
eval ac_new_set=\$ac_env_${ac_var}_set
eval ac_old_val="\$ac_cv_env_${ac_var}_value"
eval ac_new_val="\$ac_env_${ac_var}_value"
case $ac_old_set,$ac_new_set in
set,)
{ echo "$as_me:873: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
ac_cache_corrupted=: ;;
,set)
{ echo "$as_me:877: error: \`$ac_var' was not set in the previous run" >&5
echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
ac_cache_corrupted=: ;;
,);;
*)
if test "x$ac_old_val" != "x$ac_new_val"; then
{ echo "$as_me:883: error: \`$ac_var' has changed since the previous run:" >&5
echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
{ echo "$as_me:885: former value: $ac_old_val" >&5
echo "$as_me: former value: $ac_old_val" >&2;}
{ echo "$as_me:887: current value: $ac_new_val" >&5
echo "$as_me: current value: $ac_new_val" >&2;}
ac_cache_corrupted=:
fi;;
esac
# Pass precious variables to config.status. It doesn't matter if
# we pass some twice (in addition to the command line arguments).
if test "$ac_new_set" = set; then
case $ac_new_val in
*" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"`
ac_configure_args="$ac_configure_args '$ac_arg'"
;;
*) ac_configure_args="$ac_configure_args $ac_var=$ac_new_val"
;;
esac
fi
done
if $ac_cache_corrupted; then
{ echo "$as_me:906: error: changes in the environment can compromise the build" >&5
echo "$as_me: error: changes in the environment can compromise the build" >&2;}
{ { echo "$as_me:908: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5
echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;}
{ (exit 1); exit 1; }; }
fi
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
*c*,-n*) ECHO_N= ECHO_C='
' ECHO_T=' ' ;;
*c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;;
*) ECHO_N= ECHO_C='\c' ECHO_T= ;;
esac
echo "#! $SHELL" >conftest.sh
echo "exit 0" >>conftest.sh
chmod +x conftest.sh
if { (echo "$as_me:928: PATH=\".;.\"; conftest.sh") >&5
(PATH=".;."; conftest.sh) 2>&5
ac_status=$?
echo "$as_me:931: \$? = $ac_status" >&5
(exit $ac_status); }; then
ac_path_separator=';'
else
ac_path_separator=:
fi
PATH_SEPARATOR="$ac_path_separator"
rm -f conftest.sh
ac_aux_dir=
for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
if test -f $ac_dir/install-sh; then
ac_aux_dir=$ac_dir
ac_install_sh="$ac_aux_dir/install-sh -c"
break
elif test -f $ac_dir/install.sh; then
ac_aux_dir=$ac_dir
ac_install_sh="$ac_aux_dir/install.sh -c"
break
elif test -f $ac_dir/shtool; then
ac_aux_dir=$ac_dir
ac_install_sh="$ac_aux_dir/shtool install -c"
break
fi
done
if test -z "$ac_aux_dir"; then
{ { echo "$as_me:957: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&5
echo "$as_me: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&2;}
{ (exit 1); exit 1; }; }
fi
ac_config_guess="$SHELL $ac_aux_dir/config.guess"
ac_config_sub="$SHELL $ac_aux_dir/config.sub"
ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure.
# Make sure we can run config.sub.
$ac_config_sub sun4 >/dev/null 2>&1 ||
{ { echo "$as_me:967: error: cannot run $ac_config_sub" >&5
echo "$as_me: error: cannot run $ac_config_sub" >&2;}
{ (exit 1); exit 1; }; }
echo "$as_me:971: checking build system type" >&5
echo $ECHO_N "checking build system type... $ECHO_C" >&6
if test "${ac_cv_build+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
ac_cv_build_alias=$build_alias
test -z "$ac_cv_build_alias" &&
ac_cv_build_alias=`$ac_config_guess`
test -z "$ac_cv_build_alias" &&
{ { echo "$as_me:980: error: cannot guess build type; you must specify one" >&5
echo "$as_me: error: cannot guess build type; you must specify one" >&2;}
{ (exit 1); exit 1; }; }
ac_cv_build=`$ac_config_sub $ac_cv_build_alias` ||
{ { echo "$as_me:984: error: $ac_config_sub $ac_cv_build_alias failed." >&5
echo "$as_me: error: $ac_config_sub $ac_cv_build_alias failed." >&2;}
{ (exit 1); exit 1; }; }
fi
echo "$as_me:989: result: $ac_cv_build" >&5
echo "${ECHO_T}$ac_cv_build" >&6
build=$ac_cv_build
build_cpu=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
build_vendor=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
build_os=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
echo "$as_me:996: checking host system type" >&5
echo $ECHO_N "checking host system type... $ECHO_C" >&6
if test "${ac_cv_host+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
ac_cv_host_alias=$host_alias
test -z "$ac_cv_host_alias" &&
ac_cv_host_alias=$ac_cv_build_alias
ac_cv_host=`$ac_config_sub $ac_cv_host_alias` ||
{ { echo "$as_me:1005: error: $ac_config_sub $ac_cv_host_alias failed" >&5
echo "$as_me: error: $ac_config_sub $ac_cv_host_alias failed" >&2;}
{ (exit 1); exit 1; }; }
fi
echo "$as_me:1010: result: $ac_cv_host" >&5
echo "${ECHO_T}$ac_cv_host" >&6
host=$ac_cv_host
host_cpu=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
host_vendor=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
host_os=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
echo "$as_me:1017: checking target system type" >&5
echo $ECHO_N "checking target system type... $ECHO_C" >&6
if test "${ac_cv_target+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
ac_cv_target_alias=$target_alias
test "x$ac_cv_target_alias" = "x" &&
ac_cv_target_alias=$ac_cv_host_alias
ac_cv_target=`$ac_config_sub $ac_cv_target_alias` ||
{ { echo "$as_me:1026: error: $ac_config_sub $ac_cv_target_alias failed" >&5
echo "$as_me: error: $ac_config_sub $ac_cv_target_alias failed" >&2;}
{ (exit 1); exit 1; }; }
fi
echo "$as_me:1031: result: $ac_cv_target" >&5
echo "${ECHO_T}$ac_cv_target" >&6
target=$ac_cv_target
target_cpu=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
target_vendor=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
target_os=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
# The aliases save the names the user supplied, while $host etc.
# will get canonicalized.
test -n "$target_alias" &&
test "$program_prefix$program_suffix$program_transform_name" = \
NONENONEs,x,x, &&
program_prefix=${target_alias}-
# Parse version.cpp to get the version number.
# The number is defined in version.cpp to avoid affecting the Windows
# compilation process.
#
# Julian: changed the "grep -w Major" for "grep 'version::Major'"
# because the -w option in not always present,
echo "$as_me:1052: checking for version number in $srcdir/version.cpp" >&5
echo $ECHO_N "checking for version number in $srcdir/version.cpp... $ECHO_C" >&6
VERSION_MAJOR=`grep 'version::Major' $srcdir/version.cpp | \
sed 's/.*version::.*= *//;s/[,;]//'`
VERSION_MINOR=`grep 'version::Minor' $srcdir/version.cpp | \
sed 's/.*version::.*= *//;s/[,;]//'`
VERSION_RELEASE=`grep 'version::Release' $srcdir/version.cpp | \
sed 's/.*version::.*= *//;s/[,;]//'`
echo "$as_me:1062: result: got $VERSION_MAJOR.$VERSION_MINOR.$VERSION_RELEASE" >&5
echo "${ECHO_T}got $VERSION_MAJOR.$VERSION_MINOR.$VERSION_RELEASE" >&6
if test "_$VERSION_MAJOR" = "_"; then
{ { echo "$as_me:1066: error: version::Major not found" >&5
echo "$as_me: error: version::Major not found" >&2;}
{ (exit 1); exit 1; }; }
elif test "_$VERSION_MINOR" = "_"; then
{ { echo "$as_me:1070: error: version::Minor not found" >&5
echo "$as_me: error: version::Minor not found" >&2;}
{ (exit 1); exit 1; }; }
elif test "_$VERSION_RELEASE" = "_"; then
{ { echo "$as_me:1074: error: version::Release not found" >&5
echo "$as_me: error: version::Release not found" >&2;}
{ (exit 1); exit 1; }; }
fi
am__api_version="1.6"
# Find a good install program. We prefer a C program (faster),
# so one script is as good as another. But avoid the broken or
# incompatible versions:
# SysV /etc/install, /usr/sbin/install
# SunOS /usr/etc/install
# IRIX /sbin/install
# AIX /bin/install
# AmigaOS /C/install, which installs bootblocks on floppy discs
# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
# AFS /usr/afsws/bin/install, which mishandles nonexistent args
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo "$as_me:1092: checking for a BSD compatible install" >&5
echo $ECHO_N "checking for a BSD compatible install... $ECHO_C" >&6
if test -z "$INSTALL"; then
if test "${ac_cv_path_install+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
ac_save_IFS=$IFS; IFS=$ac_path_separator
for ac_dir in $PATH; do
IFS=$ac_save_IFS
# Account for people who put trailing slashes in PATH elements.
case $ac_dir/ in
/ | ./ | .// | /cC/* \
| /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* \
| /usr/ucb/* ) ;;
*)
# OSF1 and SCO ODT 3.0 have their own names for install.
# Don't use installbsd from OSF since it installs stuff as root
# by default.
for ac_prog in ginstall scoinst install; do
if $as_executable_p "$ac_dir/$ac_prog"; then
if test $ac_prog = install &&
grep dspmsg "$ac_dir/$ac_prog" >/dev/null 2>&1; then
# AIX install. It has an incompatible calling convention.
:
elif test $ac_prog = install &&
grep pwplus "$ac_dir/$ac_prog" >/dev/null 2>&1; then
# program-specific install script used by HP pwplus--don't use.
:
else
ac_cv_path_install="$ac_dir/$ac_prog -c"
break 2
fi
fi
done
;;
esac
done
fi
if test "${ac_cv_path_install+set}" = set; then
INSTALL=$ac_cv_path_install
else
# As a last resort, use the slow shell script. We don't cache a
# path for INSTALL within a source directory, because that will
# break other packages using the cache if that directory is
# removed, or if the path is relative.
INSTALL=$ac_install_sh
fi
fi
echo "$as_me:1141: result: $INSTALL" >&5
echo "${ECHO_T}$INSTALL" >&6
# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
# It thinks the first close brace ends the variable substitution.
test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
echo "$as_me:1152: checking whether build environment is sane" >&5
echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6
# Just in case
sleep 1
echo timestamp > conftest.file
# Do `set' in a subshell so we don't clobber the current shell's
# arguments. Must try -L first in case configure is actually a
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -