cpl-06.dtd

性能优秀的SIP Proxy

<?xml version="1.0" encoding="US-ASCII" ?>

   <!--
       Draft DTD for CPL, corresponding to
       draft-ietf-iptel-cpl-06.
   -->

   <!-- Nodes. -->
   <!-- Switch nodes -->
   <!ENTITY % Switch 'address-switch|string-switch|language-switch|
                      time-switch|priority-switch' >

   <!-- Location nodes -->
   <!ENTITY % Location 'location|lookup|remove-location' >

   <!-- Signalling action nodes -->
   <!ENTITY % SignallingAction 'proxy|redirect|reject' >

   <!-- Other actions -->
   <!ENTITY % OtherAction 'mail|log' >

   <!-- Links to subactions -->
   <!ENTITY % Sub 'sub' >

   <!-- Nodes are one of the above four categories, or a subaction.
        This entity (macro) describes the contents of an output.
        Note that a node can be empty, implying default action. -->
   <!ENTITY % Node     '(%Location;|%Switch;|%SignallingAction;|
                        %OtherAction;|%Sub;)?' >


   <!-- Switches: choices a CPL script can make. -->

   <!-- All switches can have an 'otherwise' output. -->
   <!ELEMENT otherwise ( %Node; ) >

   <!-- All switches can have a 'not-present' output. -->
   <!ELEMENT not-present ( %Node; ) >

   <!-- Address-switch makes choices based on addresses. -->
   <!ELEMENT address-switch ( address*, (not-present, address*)?,
                              otherwise? ) >
   <!-- <not-present> must appear at most once -->
   <!ATTLIST address-switch
      field         CDATA    #REQUIRED
      subfield      CDATA    #IMPLIED
   >

   <!ELEMENT address ( %Node; ) >

   <!ATTLIST address
      is            CDATA    #IMPLIED
      contains      CDATA    #IMPLIED
      subdomain-of  CDATA    #IMPLIED
   > <!-- Exactly one of these three attributes must appear -->


   <!-- String-switch makes choices based on strings. -->

   <!ELEMENT string-switch ( string*, (not-present, string*)?,
                             otherwise? ) >
   <!-- <not-present> must appear at most once -->
   <!ATTLIST string-switch
      field         CDATA    #REQUIRED
   >

   <!ELEMENT string ( %Node; ) >
   <!ATTLIST string
      is            CDATA    #IMPLIED
      contains      CDATA    #IMPLIED
   >  <!-- Exactly one of these two attributes must appear -->


   <!-- Language-switch makes choices based on the originator's preferred
        languages. -->

   <!ELEMENT language-switch ( language*, (not-present, language*)?,
                               otherwise? ) >
   <!-- <not-present> must appear at most once -->

   <!ELEMENT language ( %Node; ) >
   <!ATTLIST language
      matches      CDATA     #REQUIRED
   >


   <!-- Time-switch makes choices based on the current time. -->

   <!ELEMENT time-switch ( time*, (not-present, time*)?, otherwise? ) >
   <!ATTLIST time-switch
      tzid          CDATA    #IMPLIED
      tzurl         CDATA    #IMPLIED
   >

   <!ELEMENT time ( %Node; ) >

   <!-- Exactly one of the two attributes "dtend" and "duration"
        must occur. -->
   <!-- The value of "freq" is (daily|weekly|monthly|yearly).  It is
           case-insensitive, so it is not given as a DTD switch. -->
   <!-- None of the attributes following freq are meaningful unless freq
            appears. -->
   <!-- The value of "wkst" is (MO|TU|WE|TH|FR|SA|SU).  It is
           case-insensitive, so it is not given as a DTD switch. -->
   <!ATTLIST time
      dtstart       CDATA  #REQUIRED
      dtend         CDATA  #IMPLIED
      duration      CDATA  #IMPLIED
      freq          CDATA  #IMPLIED
      until         CDATA  #IMPLIED
      count         CDATA  #IMPLIED
      interval      CDATA  "1"
      bysecond      CDATA  #IMPLIED
      byminute      CDATA  #IMPLIED
      byhour        CDATA  #IMPLIED
      byday         CDATA  #IMPLIED
      bymonthday    CDATA  #IMPLIED
      byyearday     CDATA  #IMPLIED
      byweekno      CDATA  #IMPLIED
      bymonth       CDATA  #IMPLIED
      wkst          CDATA  "MO"
      bysetpos      CDATA  #IMPLIED
   >


   <!-- Priority-switch makes choices based on message priority. -->

   <!ELEMENT priority-switch ( priority*, (not-present, priority*)?,
                               otherwise? ) >
   <!-- <not-present> must appear at most once -->

   <!ENTITY % PriorityVal '(emergency|urgent|normal|non-urgent)' >

   <!ELEMENT priority ( %Node; ) >

   <!-- Exactly one of these three attributes must appear -->
   <!ATTLIST priority
      less          %PriorityVal;  #IMPLIED
      greater       %PriorityVal;  #IMPLIED
      equal         CDATA          #IMPLIED
   >


   <!-- Locations: ways to specify the location a subsequent action
        (proxy, redirect) will attempt to contact. -->

   <!ENTITY % Clear  'clear (yes|no) "no"' >


   <!ELEMENT location ( %Node; ) >
   <!ATTLIST location
      url           CDATA    #REQUIRED
      priority      CDATA    #IMPLIED
      %Clear;
   >
   <!-- priority is in the range  0.0 - 1.0.  Its default value SHOULD
         be 1.0 -->

   <!ELEMENT lookup ( success?,notfound?,failure? ) >
   <!ATTLIST lookup
     source         CDATA     #REQUIRED
     timeout        CDATA     "30"
     use            CDATA     #IMPLIED
     ignore         CDATA     #IMPLIED
     %Clear;
   >

   <!ELEMENT success  ( %Node; ) >
   <!ELEMENT notfound ( %Node; ) >
   <!ELEMENT failure ( %Node; ) >

   <!ELEMENT remove-location ( %Node; ) >
   <!ATTLIST remove-location
      param         CDATA    #IMPLIED
      value         CDATA    #IMPLIED
      location      CDATA    #IMPLIED
   >


   <!-- Signalling Actions: call-signalling actions the script can
        take. -->

   <!ELEMENT proxy ( busy?,noanswer?,redirection?,failure?,default? ) >

   <!-- The default value of timeout is "20" if the <noanswer> output
        exists. -->
   <!ATTLIST proxy
      timeout       CDATA    #IMPLIED
      recurse       (yes|no) "yes"
      ordering      (parallel|sequential|first-only) "parallel"
   >

   <!ELEMENT busy ( %Node; ) >
   <!ELEMENT noanswer ( %Node; ) >
   <!ELEMENT redirection ( %Node; ) >
   <!-- "failure" repeats from lookup, above. -->
   <!ELEMENT default ( %Node; ) >

   <!ELEMENT redirect EMPTY >
   <!ATTLIST redirect
      permanent     (yes|no) "no"
   >


   <!-- Statuses we can return -->

   <!ELEMENT reject EMPTY >
   <!-- The value of "status" is (busy|notfound|reject|error), or a SIP
        4xx-6xx status. -->
   <!ATTLIST reject
      status        CDATA    #REQUIRED
      reason        CDATA    #IMPLIED
   >

   <!-- Non-signalling actions: actions that don't affect the call -->

   <!ELEMENT mail ( %Node; ) >
   <!ATTLIST mail
      url           CDATA    #REQUIRED
   >

   <!ELEMENT log ( %Node; ) >
   <!ATTLIST log
      name          CDATA    #IMPLIED
      comment       CDATA    #IMPLIED
   >


   <!-- Calls to subactions. -->

   <!ELEMENT sub EMPTY >
   <!ATTLIST sub
      ref           IDREF    #REQUIRED
   >


   <!-- Ancillary data -->

   <!ENTITY % Ancillary 'ancillary?' >

   <!ELEMENT ancillary EMPTY >


   <!-- Subactions -->

   <!ENTITY % Subactions 'subaction*' >


   <!ELEMENT subaction ( %Node; )>
   <!ATTLIST subaction
      id            ID       #REQUIRED
   >


   <!-- Top-level actions -->

   <!ENTITY % TopLevelActions 'outgoing?,incoming?' >

   <!ELEMENT outgoing ( %Node; )>

   <!ELEMENT incoming ( %Node; )>

   <!-- The top-level element of the script. -->

   <!ELEMENT cpl  ( %Ancillary;,%Subactions;,%TopLevelActions; ) >