ltmain.sh

Linux 下察看 Chm 文件 的 源码

    # Recognize several different file suffixes.
    # If the user specifies -o file.o, it is replaced with file.lo
    xform='[cCFSifmso]'
    case $libobj in
    *.ada) xform=ada ;;
    *.adb) xform=adb ;;
    *.ads) xform=ads ;;
    *.asm) xform=asm ;;
    *.c++) xform=c++ ;;
    *.cc) xform=cc ;;
    *.ii) xform=ii ;;
    *.class) xform=class ;;
    *.cpp) xform=cpp ;;
    *.cxx) xform=cxx ;;
    *.f90) xform=f90 ;;
    *.for) xform=for ;;
    *.java) xform=java ;;
    esac

    libobj=`$echo "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"`

    case $libobj in
    *.lo) obj=`$echo "X$libobj" | $Xsed -e "$lo2o"` ;;
    *)
      $echo "$modename: cannot determine name of library object from \`$libobj'" 1>&2
      exit 1
      ;;
    esac

    # Infer tagged configuration to use if any are available and
    # if one wasn't chosen via the "--tag" command line option.
    # Only attempt this if the compiler in the base compile
    # command doesn't match the default compiler.
    if test -n "$available_tags" && test -z "$tagname"; then
      case $base_compile in
      # Blanks in the command may have been stripped by the calling shell,
      # but not from the CC environment variable when configure was run.
      " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "*) ;;
      # Blanks at the start of $base_compile will cause this to fail
      # if we don't check for them as well.
      *)
	for z in $available_tags; do
	  if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$0" > /dev/null; then
	    # Evaluate the configuration.
	    eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $0`"
	    case "$base_compile " in
	    "$CC "* | " $CC "* | "`$echo $CC` "* | " `$echo $CC` "*)
	      # The compiler in the base compile command matches
	      # the one in the tagged configuration.
	      # Assume this is the tagged configuration we want.
	      tagname=$z
	      break
	      ;;
	    esac
	  fi
	done
	# If $tagname still isn't set, then no tagged configuration
	# was found and let the user know that the "--tag" command
	# line option must be used.
	if test -z "$tagname"; then
	  $echo "$modename: unable to infer tagged configuration"
	  $echo "$modename: specify a tag with \`--tag'" 1>&2
	  exit 1
#        else
#          $echo "$modename: using $tagname tagged configuration"
	fi
	;;
      esac
    fi

    objname=`$echo "X$obj" | $Xsed -e 's%^.*/%%'`
    xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'`
    if test "X$xdir" = "X$obj"; then
      xdir=
    else
      xdir=$xdir/
    fi
    lobj=${xdir}$objdir/$objname

    if test -z "$base_compile"; then
      $echo "$modename: you must specify a compilation command" 1>&2
      $echo "$help" 1>&2
      exit 1
    fi

    # Delete any leftover library objects.
    if test "$build_old_libs" = yes; then
      removelist="$obj $lobj $libobj ${libobj}T"
    else
      removelist="$lobj $libobj ${libobj}T"
    fi

    $run $rm $removelist
    trap "$run $rm $removelist; exit 1" 1 2 15

    # On Cygwin there's no "real" PIC flag so we must build both object types
    case $host_os in
    cygwin* | mingw* | pw32* | os2*)
      pic_mode=default
      ;;
    esac
    if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then
      # non-PIC code in shared libraries is not supported
      pic_mode=default
    fi

    # Calculate the filename of the output object if compiler does
    # not support -o with -c
    if test "$compiler_c_o" = no; then
      output_obj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext}
      lockfile="$output_obj.lock"
      removelist="$removelist $output_obj $lockfile"
      trap "$run $rm $removelist; exit 1" 1 2 15
    else
      output_obj=
      need_locks=no
      lockfile=
    fi

    # Lock this critical section if it is needed
    # We use this script file to make the link, it avoids creating a new file
    if test "$need_locks" = yes; then
      until $run ln "$0" "$lockfile" 2>/dev/null; do
	$show "Waiting for $lockfile to be removed"
	sleep 2
      done
    elif test "$need_locks" = warn; then
      if test -f "$lockfile"; then
	$echo "\
*** ERROR, $lockfile exists and contains:
`cat $lockfile 2>/dev/null`

This indicates that another process is trying to use the same
temporary object file, and libtool could not work around it because
your compiler does not support \`-c' and \`-o' together.  If you
repeat this compilation, it may succeed, by chance, but you had better
avoid parallel builds (make -j) in this platform, or get a better
compiler."

	$run $rm $removelist
	exit 1
      fi
      $echo $srcfile > "$lockfile"
    fi

    if test -n "$fix_srcfile_path"; then
      eval srcfile=\"$fix_srcfile_path\"
    fi

    $run $rm "$libobj" "${libobj}T"

    # Create a libtool object file (analogous to a ".la" file),
    # but don't create it if we're doing a dry run.
    test -z "$run" && cat > ${libobj}T <<EOF
# $libobj - a libtool object file
# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
#
# Please DO NOT delete this file!
# It is necessary for linking the library.

# Name of the PIC object.
EOF

    # Only build a PIC object if we are building libtool libraries.
    if test "$build_libtool_libs" = yes; then
      # Without this assignment, base_compile gets emptied.
      fbsd_hideous_sh_bug=$base_compile

      if test "$pic_mode" != no; then
	command="$base_compile $srcfile $pic_flag"
      else
	# Don't build PIC code
	command="$base_compile $srcfile"
      fi

      if test ! -d "${xdir}$objdir"; then
	$show "$mkdir ${xdir}$objdir"
	$run $mkdir ${xdir}$objdir
	status=$?
	if test "$status" -ne 0 && test ! -d "${xdir}$objdir"; then
	  exit $status
	fi
      fi

      if test -z "$output_obj"; then
	# Place PIC objects in $objdir
	command="$command -o $lobj"
      fi

      $run $rm "$lobj" "$output_obj"

      $show "$command"
      if $run eval "$command"; then :
      else
	test -n "$output_obj" && $run $rm $removelist
	exit 1
      fi

      if test "$need_locks" = warn &&
	 test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
	$echo "\
*** ERROR, $lockfile contains:
`cat $lockfile 2>/dev/null`

but it should contain:
$srcfile

This indicates that another process is trying to use the same
temporary object file, and libtool could not work around it because
your compiler does not support \`-c' and \`-o' together.  If you
repeat this compilation, it may succeed, by chance, but you had better
avoid parallel builds (make -j) in this platform, or get a better
compiler."

	$run $rm $removelist
	exit 1
      fi

      # Just move the object if needed, then go on to compile the next one
      if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then
	$show "$mv $output_obj $lobj"
	if $run $mv $output_obj $lobj; then :
	else
	  error=$?
	  $run $rm $removelist
	  exit $error
	fi
      fi

      # Append the name of the PIC object to the libtool object file.
      test -z "$run" && cat >> ${libobj}T <<EOF
pic_object='$objdir/$objname'

EOF

      # Allow error messages only from the first compilation.
      suppress_output=' >/dev/null 2>&1'
    else
      # No PIC object so indicate it doesn't exist in the libtool
      # object file.
      test -z "$run" && cat >> ${libobj}T <<EOF
pic_object=none

EOF
    fi

    # Only build a position-dependent object if we build old libraries.
    if test "$build_old_libs" = yes; then
      if test "$pic_mode" != yes; then
	# Don't build PIC code
	command="$base_compile $srcfile"
      else
	command="$base_compile $srcfile $pic_flag"
      fi
      if test "$compiler_c_o" = yes; then
	command="$command -o $obj"
      fi

      # Suppress compiler output if we already did a PIC compilation.
      command="$command$suppress_output"
      $run $rm "$obj" "$output_obj"
      $show "$command"
      if $run eval "$command"; then :
      else
	$run $rm $removelist
	exit 1
      fi

      if test "$need_locks" = warn &&
	 test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
	$echo "\
*** ERROR, $lockfile contains:
`cat $lockfile 2>/dev/null`

but it should contain:
$srcfile

This indicates that another process is trying to use the same
temporary object file, and libtool could not work around it because
your compiler does not support \`-c' and \`-o' together.  If you
repeat this compilation, it may succeed, by chance, but you had better
avoid parallel builds (make -j) in this platform, or get a better
compiler."

	$run $rm $removelist
	exit 1
      fi

      # Just move the object if needed
      if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then
	$show "$mv $output_obj $obj"
	if $run $mv $output_obj $obj; then :
	else
	  error=$?
	  $run $rm $removelist
	  exit $error
	fi
      fi

      # Append the name of the non-PIC object the libtool object file.
      # Only append if the libtool object file exists.
      test -z "$run" && cat >> ${libobj}T <<EOF
# Name of the non-PIC object.
non_pic_object='$objname'

EOF
    else
      # Append the name of the non-PIC object the libtool object file.
      # Only append if the libtool object file exists.
      test -z "$run" && cat >> ${libobj}T <<EOF
# Name of the non-PIC object.
non_pic_object=none

EOF
    fi

    $run $mv "${libobj}T" "${libobj}"

    # Unlock the critical section if it was locked
    if test "$need_locks" != no; then
      $run $rm "$lockfile"
    fi

    exit 0
    ;;

  # libtool link mode
  link | relink)
    modename="$modename: link"
    case $host in
    *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
      # It is impossible to link a dll without this setting, and
      # we shouldn't force the makefile maintainer to figure out
      # which system we are compiling for in order to pass an extra
      # flag for every libtool invocation.
      # allow_undefined=no

      # FIXME: Unfortunately, there are problems with the above when trying
      # to make a dll which has undefined symbols, in which case not
      # even a static library is built.  For now, we need to specify
      # -no-undefined on the libtool link line when we can be certain
      # that all symbols are satisfied, otherwise we get a static library.
      allow_undefined=yes
      ;;
    *)
      allow_undefined=yes
      ;;
    esac
    libtool_args="$nonopt"
    base_compile="$nonopt"
    compile_command="$nonopt"
    finalize_command="$nonopt"

    compile_rpath=
    finalize_rpath=
    compile_shlibpath=
    finalize_shlibpath=
    convenience=
    old_convenience=
    deplibs=
    old_deplibs=
    compiler_flags=
    linker_flags=
    dllsearchpath=
    lib_search_path=`pwd`
    inst_prefix_dir=

    avoid_version=no
    dlfiles=
    dlprefiles=
    dlself=no
    export_dynamic=no
    export_symbols=
    export_symbols_regex=
    generated=
    libobjs=
    ltlibs=
    module=no
    no_install=no
    objs=
    non_pic_objects=
    prefer_static_libs=no
    preload=no
    prev=
    prevarg=
    release=
    rpath=
    xrpath=
    perm_rpath=
    temp_rpath=
    thread_safe=no
    vinfo=
    vinfo_number=no

    # We need to know -static, to get the right output filenames.
    for arg
    do
      case $arg in
      -all-static | -static)
	if test "X$arg" = "X-all-static"; then
	  if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then
	    $echo "$modename: warning: complete static linking is impossible in this configuration" 1>&2
	  fi
	  if test -n "$link_static_flag"; then
	    dlopen_self=$dlopen_self_static
	  fi
	else
	  if test -z "$pic_flag" && test -n "$link_static_flag"; then
	    dlopen_self=$dlopen_self_static
	  fi
	fi
	build_libtool_libs=no
	build_old_libs=yes
	prefer_static_libs=yes
	break
	;;
      esac
    done

    # See if our shared archives depend on static archives.
    test -n "$old_archive_from_new_cmds" && build_old_libs=yes

    # Go through the arguments, transforming them on the way.
    while test "$#" -gt 0; do
      arg="$1"
      base_compile="$base_compile $arg"
      shift
      case $arg in
      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
	qarg=\"`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`\" ### testsuite: skip nested quoting test
	;;
      *) qarg=$arg ;;
      esac
      libtool_args="$libtool_args $qarg"

      # If the previous option needs an argument, assign it.
      if test -n "$prev"; then
	case $prev in
	output)
	  compile_command="$compile_command @OUTPUT@"
	  finalize_command="$finalize_command @OUTPUT@"
	  ;;
	esac

	case $prev in
	dlfiles|dlprefiles)
	  if test "$preload" = no; then
	    # Add the symbol object into the linking commands.
	    compile_command="$compile_command @SYMFILE@"
	    finalize_command="$finalize_command @SYMFILE@"
	    preload=yes
	  fi
	  case $arg in
	  *.la | *.lo) ;;  # We handle these cases below.
	  force)
	    if test "$dlself" = no; then
	      dlself=needless
	      export_dynamic=yes
	    fi
	    prev=
	    continue
	    ;;
	  self)
	    if test "$prev" = dlprefiles; then
	      dlself=yes
	    elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then
	      dlself=yes
	    else
	      dlself=needless
	      export_dynamic=yes
	    fi
	    prev=
	    continue
	    ;;
	  *)
	    if test "$prev" = dlfiles; then
	      dlfiles="$dlfiles $arg"
	    else
	      dlprefiles="$dlprefiles $arg"
	    fi
	    prev=
	    continue
	    ;;
	  esac
	  ;;
	expsyms)
	  export_symbols="$arg"
	  if test ! -f "$arg"; then
	    $echo "$modename: symbol file \`$arg' does not exist"