📄 dmfe.c
字号:
/*
dmfe.c: Version 1.36 04/20/2001 for Linux kernel 2.2.x
A Davicom DM9102/DM9102A/DM9102A+DM9801/DM9102A+DM9802 NIC fast
ethernet driver for Linux.
Copyright (C) 1997 Sten Wang
This program is free software; you can redistribute it and/or
modify it under the terms of the GNU General Public License
as published by the Free Software Foundation; either version 2
of the License, or (at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
Compiler command:
"gcc -DMODULE -D__KERNEL__ -I/usr/src/linux/net/inet -Wall
-Wstrict-prototypes -O6 -c dmfe.c"
OR
"gcc -DMODULE -DMODVERSIONS -D__KERNEL__ -I/usr/src/linux/net/inet
-Wall -Wstrict-prototypes -O6 -c dmfe.c"
OR
"gcc -D__SMP__ -DMODULE -DMODVERSIONS -D__KERNEL__ -I/usr/src/linux
/net/inet -Wall -Wstrict-prototypes -O6 -c dmfe.c"
Note: "O" of -O6 is a capital o, not a "0"
The following steps teach you how to active DM9102 board, but you need to
do again when you reboot:
1. Used the upper compiler command to compile dmfe.c
2. insert dmfe module into kernel
"insmod dmfe" ;;Auto Detection Mode
"insmod dmfe mode=0" ;;Force 10M Half Duplex
"insmod dmfe mode=1" ;;Force 100M Half Duplex
"insmod dmfe mode=4" ;;Force 10M Full Duplex
"insmod dmfe mode=5" ;;Force 100M Full Duplex
"insmod dmfe mode=100" ;;Force 1M HomeRun(DM9801)
"insmod dmfe mode=200" ;;Force 1M LongRun(DM9802)
3. config a dm9102 network interface
"ifconfig eth0 172.22.3.18"
^^^^^^^^^^^ your IP address
4. active the IP routing table
"route add -net 172.22.3.0 eth0"
5. Well done. Your DM9102 adapter actived now.
DAVICOM Web-Site: www.davicom.com.tw
Author: Sten Wang, 886-3-5798797-8517, E-mail: sten_wang@davicom.com.tw
Date: 03/08,2001
(C)Copyright 1997-1998 DAVICOM Semiconductor,Inc. All Rights Reserved.
*/
#if defined(MODVERSIONS)
#include <linux/modversions.h>
#endif
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/string.h>
#include <linux/timer.h>
#include <linux/ptrace.h>
#include <linux/errno.h>
#include <linux/ioport.h>
#include <linux/malloc.h>
#include <linux/interrupt.h>
#include <linux/pci.h>
#include <linux/delay.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/skbuff.h>
#if LINUX_VERSION_CODE < 0x20155
#include <linux/bios32.h>
#endif
#include <asm/processor.h>
#include <asm/bitops.h>
#include <asm/io.h>
#include <asm/dma.h>
#include <linux/version.h>
/* Board/System/Debug information/definition ---------------- */
#define PCI_DM9132_ID 0x91321282 /* Davicom DM9132 ID */
#define PCI_DM9102_ID 0x91021282 /* Davicom DM9102 ID */
#define PCI_DM9100_ID 0x91001282 /* Davicom DM9100 ID */
#define PCI_DM9009_ID 0x90091282 /* Davicom DM9009 ID */
#define DMFE_SUCC 0
#define DM9102_IO_SIZE 0x80
#define DM9102A_IO_SIZE 0x100
#define TX_MAX_SEND_CNT 0x1 /* Maximum tx packet per time */
#define TX_DESC_CNT 0x10 /* Allocated Tx descriptors */
#define RX_DESC_CNT 0x20 /* Allocated Rx descriptors */
#define TX_FREE_DESC_CNT (TX_DESC_CNT-2) /* Max TX packet count */
#define TX_WAKE_DESC_CNT (TX_DESC_CNT-3) /* TX wakeup count */
#define DESC_ALL_CNT (TX_DESC_CNT+RX_DESC_CNT)
#define TX_BUF_ALLOC 0x600
#define RX_ALLOC_SIZE 0x620
#define DM910X_RESET 1
#define CR0_DEFAULT 0x00E00000 /* TX & RX burst mode */
#define CR6_DEFAULT 0x00080000 /* HD */
#define CR7_DEFAULT 0x180c1
#define CR15_DEFAULT 0x06 /* TxJabber RxWatchdog */
#define TDES0_ERR_MASK 0x4302 /* TXJT, LC, EC, FUE */
#define MAX_PACKET_SIZE 1514
#define DMFE_MAX_MULTICAST 14
#define RX_COPY_SIZE 100
#define MAX_CHECK_PACKET 0x8000
#define DM9801_NOISE_FLOOR 8
#define DM9802_NOISE_FLOOR 5
#define DMFE_10MHF 0
#define DMFE_100MHF 1
#define DMFE_10MFD 4
#define DMFE_100MFD 5
#define DMFE_AUTO 8
#define DMFE_1M_HPNA 0x10
#define DMFE_1M_LONG 0x20
#define DMFE_TXTH_72 0x400000 /* TX TH 72 byte */
#define DMFE_TXTH_96 0x404000 /* TX TH 96 byte */
#define DMFE_TXTH_128 0x0000 /* TX TH 128 byte */
#define DMFE_TXTH_256 0x4000 /* TX TH 256 byte */
#define DMFE_TXTH_512 0x8000 /* TX TH 512 byte */
#define DMFE_TXTH_1K 0xC000 /* TX TH 1K byte */
#define DMFE_TIMER_WUT (jiffies + HZ * 1)/* timer wakeup time : 1 second */
#define DMFE_TX_TIMEOUT (HZ * 1.5) /* tx packet time-out time 1.5 s" */
#define DMFE_TX_KICK (HZ * 0.5) /* tx packet Kick-out time 0.5 s" */
#define DMFE_DBUG(dbug_now, msg, vaule) if (dmfe_debug || dbug_now) printk(KERN_ERR "dmfe: %s %x\n", msg, vaule)
#define DELAY_5US udelay(5) /* udelay scale 1 usec */
#define DELAY_1US udelay(1) /* udelay scale 1 usec */
#define SHOW_MEDIA_TYPE(mode) printk(KERN_ERR "dmfe: Change Speed to %sMhz %s duplex\n",mode & 1 ?"100":"10", mode & 4 ? "full":"half");
/* CR9 definition: SROM/MII */
#define CR9_SROM_READ 0x4800
#define CR9_SRCS 0x1
#define CR9_SRCLK 0x2
#define CR9_CRDOUT 0x8
#define SROM_DATA_0 0x0
#define SROM_DATA_1 0x4
#define PHY_DATA_1 0x20000
#define PHY_DATA_0 0x00000
#define MDCLKH 0x10000
#define PHY_POWER_DOWN 0x800
#define SROM_V41_CODE 0x14
#define SROM_CLK_WRITE(data, ioaddr) outl(data|CR9_SROM_READ|CR9_SRCS,ioaddr);DELAY_5US;outl(data|CR9_SROM_READ|CR9_SRCS|CR9_SRCLK,ioaddr);DELAY_5US;outl(data|CR9_SROM_READ|CR9_SRCS,ioaddr);DELAY_5US;
#define CHK_IO_SIZE(pci_id, dev_rev) ( (pci_id==PCI_DM9132_ID) || (dev_rev >= 0x02000030) ) ? DM9102A_IO_SIZE: DM9102_IO_SIZE
#if LINUX_VERSION_CODE < 0x20123
#define test_and_set_bit(val, addr) set_bit(val, addr)
#endif
#if LINUX_VERSION_CODE < 0x20300
#define DEVICE device
#else
#define DEVICE net_device
#endif
/* Structure/enum declaration ------------------------------- */
struct tx_desc
{
u32 tdes0, tdes1, tdes2, tdes3;
u32 tx_skb_ptr;
u32 tx_buf_ptr;
u32 next_tx_desc;
u32 reserved;
};
struct rx_desc
{
u32 rdes0, rdes1, rdes2, rdes3;
u32 rx_skb_ptr;
u32 rx_buf_ptr;
u32 next_rx_desc;
u32 reserved;
};
struct dmfe_board_info
{
u32 chip_id; /* Chip vendor/Device ID */
u32 chip_revision; /* Chip revision */
struct DEVICE *next_dev; /* next device */
#if LINUX_VERSION_CODE >= 0x20155
struct pci_dev * net_dev; /* PCI device */
#else
unsigned char bus; /* PCI bus number */
unsigned char fun; /* PCI function number */
#endif
u32 ioaddr; /* I/O base address */
u32 cr0_data;
u32 cr5_data;
u32 cr6_data;
u32 cr7_data;
u32 cr15_data;
/* descriptor pointer */
unsigned char *buf_pool_ptr; /* Tx buffer pool memory */
unsigned char *buf_pool_start; /* Tx buffer pool align dword */
unsigned char *desc_pool_ptr; /* descriptor pool memory */
struct tx_desc *first_tx_desc;
struct tx_desc *tx_insert_ptr;
struct tx_desc *tx_remove_ptr;
struct rx_desc *first_rx_desc;
struct rx_desc *rx_insert_ptr;
struct rx_desc *rx_ready_ptr; /* packet come pointer */
u32 tx_packet_cnt; /* transmitted packet count */
u32 tx_queue_cnt; /* wait to send packet count */
u32 rx_avail_cnt; /* available rx descriptor count */
u32 interval_rx_cnt; /* rx packet count a callback time */
u16 HPNA_command; /* For HPNA register 16 */
u16 HPNA_timer; /* For HPNA remote device check */
u16 dbug_cnt;
u16 NIC_capability; /* NIC media capability */
u16 PHY_reg4; /* Saved Phyxcer register 4 value */
u8 HPNA_present; /* 0:none, 1:DM9801, 2:DM9802 */
u8 chip_type; /* Keep DM9102A chip type */
u8 media_mode; /* user specify media mode */
u8 op_mode; /* real work media mode */
u8 phy_addr;
u8 link_failed; /* Ever link failed */
u8 wait_reset; /* Hardware failed, need to reset */
u8 dm910x_chk_mode; /* Operating mode check */
u8 first_in_callback; /* Flag to record state */
struct timer_list timer;
#if LINUX_VERSION_CODE < 0x20400
struct enet_statistics stats; /* statistic counter */
#else
struct net_device_stats stats; /* statistic counter */
#endif
/* Driver defined statistic counter */
unsigned long tx_fifo_underrun;
unsigned long tx_loss_carrier;
unsigned long tx_no_carrier;
unsigned long tx_late_collision;
unsigned long tx_excessive_collision;
unsigned long tx_jabber_timeout;
unsigned long reset_count;
unsigned long reset_cr8;
unsigned long reset_fatal;
unsigned long reset_TXtimeout;
unsigned char srom[128];
};
enum dmfe_offsets
{
DCR0=0, DCR1=0x08, DCR2=0x10, DCR3=0x18, DCR4=0x20, DCR5=0x28,
DCR6=0x30, DCR7=0x38, DCR8=0x40, DCR9=0x48, DCR10=0x50, DCR11=0x58,
DCR12=0x60, DCR13=0x68, DCR14=0x70, DCR15=0x78
};
enum dmfe_CR6_bits
{
CR6_RXSC=0x2, CR6_PBF=0x8, CR6_PM=0x40, CR6_PAM=0x80, CR6_FDM=0x200,
CR6_TXSC=0x2000, CR6_STI=0x100000, CR6_SFT=0x200000, CR6_RXA=0x40000000,
CR6_NO_PURGE=0x20000000
};
/* Global variable declaration ----------------------------- */
static int dmfe_debug = 0;
static unsigned char dmfe_media_mode=DMFE_AUTO;
static struct DEVICE * dmfe_root_dev=NULL; /* First device */
static u32 dmfe_cr6_user_set = 0;
/* For module input parameter */
static int debug=0;
static u32 cr6set=0;
static unsigned char mode=8;
static u8 chkmode=1;
static u8 HPNA_mode=0; /* Default: Low Power/High Speed */
static u8 HPNA_rx_cmd=0; /* Default: Disable Rx remote command */
static u8 HPNA_tx_cmd=0; /* Default: Don't issue remote command */
static u8 HPNA_NoiseFloor = 0; /* Default: HPNA NoiseFloor */
static u8 SF_mode=0; /* Special Function: 1:VLAN, 2:RX Flow Control
4: TX pause packet */
unsigned long CrcTable[256] = {
0x00000000L, 0x77073096L, 0xEE0E612CL, 0x990951BAL,
0x076DC419L, 0x706AF48FL, 0xE963A535L, 0x9E6495A3L,
0x0EDB8832L, 0x79DCB8A4L, 0xE0D5E91EL, 0x97D2D988L,
0x09B64C2BL, 0x7EB17CBDL, 0xE7B82D07L, 0x90BF1D91L,
0x1DB71064L, 0x6AB020F2L, 0xF3B97148L, 0x84BE41DEL,
0x1ADAD47DL, 0x6DDDE4EBL, 0xF4D4B551L, 0x83D385C7L,
0x136C9856L, 0x646BA8C0L, 0xFD62F97AL, 0x8A65C9ECL,
0x14015C4FL, 0x63066CD9L, 0xFA0F3D63L, 0x8D080DF5L,
0x3B6E20C8L, 0x4C69105EL, 0xD56041E4L, 0xA2677172L,
0x3C03E4D1L, 0x4B04D447L, 0xD20D85FDL, 0xA50AB56BL,
0x35B5A8FAL, 0x42B2986CL, 0xDBBBC9D6L, 0xACBCF940L,
0x32D86CE3L, 0x45DF5C75L, 0xDCD60DCFL, 0xABD13D59L,
0x26D930ACL, 0x51DE003AL, 0xC8D75180L, 0xBFD06116L,
0x21B4F4B5L, 0x56B3C423L, 0xCFBA9599L, 0xB8BDA50FL,
0x2802B89EL, 0x5F058808L, 0xC60CD9B2L, 0xB10BE924L,
0x2F6F7C87L, 0x58684C11L, 0xC1611DABL, 0xB6662D3DL,
0x76DC4190L, 0x01DB7106L, 0x98D220BCL, 0xEFD5102AL,
0x71B18589L, 0x06B6B51FL, 0x9FBFE4A5L, 0xE8B8D433L,
0x7807C9A2L, 0x0F00F934L, 0x9609A88EL, 0xE10E9818L,
0x7F6A0DBBL, 0x086D3D2DL, 0x91646C97L, 0xE6635C01L,
0x6B6B51F4L, 0x1C6C6162L, 0x856530D8L, 0xF262004EL,
0x6C0695EDL, 0x1B01A57BL, 0x8208F4C1L, 0xF50FC457L,
0x65B0D9C6L, 0x12B7E950L, 0x8BBEB8EAL, 0xFCB9887CL,
0x62DD1DDFL, 0x15DA2D49L, 0x8CD37CF3L, 0xFBD44C65L,
0x4DB26158L, 0x3AB551CEL, 0xA3BC0074L, 0xD4BB30E2L,
0x4ADFA541L, 0x3DD895D7L, 0xA4D1C46DL, 0xD3D6F4FBL,
0x4369E96AL, 0x346ED9FCL, 0xAD678846L, 0xDA60B8D0L,
0x44042D73L, 0x33031DE5L, 0xAA0A4C5FL, 0xDD0D7CC9L,
0x5005713CL, 0x270241AAL, 0xBE0B1010L, 0xC90C2086L,
0x5768B525L, 0x206F85B3L, 0xB966D409L, 0xCE61E49FL,
0x5EDEF90EL, 0x29D9C998L, 0xB0D09822L, 0xC7D7A8B4L,
0x59B33D17L, 0x2EB40D81L, 0xB7BD5C3BL, 0xC0BA6CADL,
0xEDB88320L, 0x9ABFB3B6L, 0x03B6E20CL, 0x74B1D29AL,
0xEAD54739L, 0x9DD277AFL, 0x04DB2615L, 0x73DC1683L,
0xE3630B12L, 0x94643B84L, 0x0D6D6A3EL, 0x7A6A5AA8L,
0xE40ECF0BL, 0x9309FF9DL, 0x0A00AE27L, 0x7D079EB1L,
0xF00F9344L, 0x8708A3D2L, 0x1E01F268L, 0x6906C2FEL,
0xF762575DL, 0x806567CBL, 0x196C3671L, 0x6E6B06E7L,
0xFED41B76L, 0x89D32BE0L, 0x10DA7A5AL, 0x67DD4ACCL,
0xF9B9DF6FL, 0x8EBEEFF9L, 0x17B7BE43L, 0x60B08ED5L,
0xD6D6A3E8L, 0xA1D1937EL, 0x38D8C2C4L, 0x4FDFF252L,
0xD1BB67F1L, 0xA6BC5767L, 0x3FB506DDL, 0x48B2364BL,
0xD80D2BDAL, 0xAF0A1B4CL, 0x36034AF6L, 0x41047A60L,
0xDF60EFC3L, 0xA867DF55L, 0x316E8EEFL, 0x4669BE79L,
0xCB61B38CL, 0xBC66831AL, 0x256FD2A0L, 0x5268E236L,
0xCC0C7795L, 0xBB0B4703L, 0x220216B9L, 0x5505262FL,
0xC5BA3BBEL, 0xB2BD0B28L, 0x2BB45A92L, 0x5CB36A04L,
0xC2D7FFA7L, 0xB5D0CF31L, 0x2CD99E8BL, 0x5BDEAE1DL,
0x9B64C2B0L, 0xEC63F226L, 0x756AA39CL, 0x026D930AL,
0x9C0906A9L, 0xEB0E363FL, 0x72076785L, 0x05005713L,
0x95BF4A82L, 0xE2B87A14L, 0x7BB12BAEL, 0x0CB61B38L,
0x92D28E9BL, 0xE5D5BE0DL, 0x7CDCEFB7L, 0x0BDBDF21L,
0x86D3D2D4L, 0xF1D4E242L, 0x68DDB3F8L, 0x1FDA836EL,
0x81BE16CDL, 0xF6B9265BL, 0x6FB077E1L, 0x18B74777L,
0x88085AE6L, 0xFF0F6A70L, 0x66063BCAL, 0x11010B5CL,
0x8F659EFFL, 0xF862AE69L, 0x616BFFD3L, 0x166CCF45L,
0xA00AE278L, 0xD70DD2EEL, 0x4E048354L, 0x3903B3C2L,
0xA7672661L, 0xD06016F7L, 0x4969474DL, 0x3E6E77DBL,
0xAED16A4AL, 0xD9D65ADCL, 0x40DF0B66L, 0x37D83BF0L,
0xA9BCAE53L, 0xDEBB9EC5L, 0x47B2CF7FL, 0x30B5FFE9L,
0xBDBDF21CL, 0xCABAC28AL, 0x53B39330L, 0x24B4A3A6L,
0xBAD03605L, 0xCDD70693L, 0x54DE5729L, 0x23D967BFL,
0xB3667A2EL, 0xC4614AB8L, 0x5D681B02L, 0x2A6F2B94L,
0xB40BBE37L, 0xC30C8EA1L, 0x5A05DF1BL, 0x2D02EF8DL
};
/* function declaration ------------------------------------- */
int dmfe_reg_board(struct DEVICE *);
int dmfe_probe(struct DEVICE *);
static int dmfe_open(struct DEVICE *);
static int dmfe_start_xmit(struct sk_buff *, struct DEVICE *);
static int dmfe_stop(struct DEVICE *);
#if LINUX_VERSION_CODE < 0x20400
static struct enet_statistics * dmfe_get_stats(struct DEVICE *);
#else
static struct net_device_stats * dmfe_get_stats(struct DEVICE *);
#endif
static void dmfe_set_filter_mode(struct DEVICE *);
static int dmfe_do_ioctl(struct DEVICE *, struct ifreq *, int);
static u16 read_srom_word(long ,int);
#ifdef SA_SHIRQ
static void dmfe_interrupt(int , void *, struct pt_regs *);
#else
static void dmfe_interrupt(int , struct pt_regs *);
#endif
static void dmfe_descriptor_init(struct dmfe_board_info *, u32);
static void allocated_rx_buffer(struct dmfe_board_info *);
static void update_cr6(u32, u32);
static void send_filter_frame(struct DEVICE * ,int);
static void dm9132_id_table(struct DEVICE * ,int);
static u16 phy_read(u32, u8, u8, u32);
static void phy_write(u32, u8, u8, u16, u32);
static void phy_write_1bit(u32, u32);
static u16 phy_read_1bit(u32);
static u8 dmfe_sense_speed(struct dmfe_board_info *);
static void dmfe_process_mode(struct dmfe_board_info *);
static void dmfe_timer(unsigned long);
static void dmfe_rx_packet(struct DEVICE *, struct dmfe_board_info *);
static void dmfe_free_tx_pkt(struct DEVICE *, struct dmfe_board_info *);
static void dmfe_reused_skb(struct dmfe_board_info *, struct sk_buff *);
static void dmfe_dynamic_reset(struct DEVICE *);
static void dmfe_free_rxbuffer(struct dmfe_board_info *);
static void dmfe_init_dm910x(struct DEVICE *);
static unsigned long cal_CRC(unsigned char *, unsigned int, u8);
static void dmfe_parse_srom(struct dmfe_board_info *);
static void dmfe_program_DM9801(struct dmfe_board_info *, int);
static void dmfe_program_DM9802(struct dmfe_board_info *);
static void dmfe_HPNA_remote_cmd_chk(struct dmfe_board_info * );
static void dmfe_set_phyxcer(struct dmfe_board_info *);
/* DM910X network baord routine ---------------------------- */
/*
Search DM910X board ,allocate space and register it
*/
int dmfe_reg_board(struct DEVICE *dev) /* For Kernel 2.2X */
{
return dmfe_probe(dev);
}
int dmfe_probe(struct DEVICE *dev)
{
u32 pci_iobase;
u16 dm9102_count=0;
u8 pci_irqline;
static int index=0; /* For multiple call */
struct dmfe_board_info *db; /* Point a board information structure */
int i;
#if LINUX_VERSION_CODE >= 0x20155
struct pci_dev * net_dev=NULL;
#else
unsigned char bus, fun;
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -