init_code.mak

BF533 上面Multiple DXE启动代码

# Generated by the VisualDSP++ IDDE

# Note:  Any changes made to this Makefile will be lost the next time the
# matching project file is loaded into the IDDE.  If you wish to preserve
# changes, rename this file and run it externally to the IDDE.

# The syntax of this Makefile is such that GNU Make v3.77 or higher is
# required.

# The current working directory should be the directory in which this
# Makefile resides.

# Supported targets:
#     Init_code_Debug
#     Init_code_Debug_clean

# Define this variable if you wish to run this Makefile on a host
# other than the host that created it and VisualDSP++ may be installed
# in a different directory.

ADI_DSP=d:\Program Files\Analog Devices\VisualDSP 4.0

ifndef ADI_DSP_MAKE
ADI_DSP_MAKE=d:/Program\ Files/Analog\ Devices/VisualDSP\ 4.0
endif

# $VDSP is a gmake-friendly version of ADI_DIR

empty:=
space:= $(empty) $(empty)
VDSP_INTERMEDIATE=$(subst \,/,$(ADI_DSP))
VDSP=$(subst $(space),\$(space),$(VDSP_INTERMEDIATE))

# Define the command to use to delete files (which is different on Win95/98
# and Windows NT/2000)

ifeq ($(OS),Windows_NT)
RM=cmd /C del /F /Q
else
RM=command /C del
endif

#
# Begin "Init_code_Debug" configuration
#

ifeq ($(MAKECMDGOALS),Init_code_Debug)

Init_code_Debug : ./Debug/Init_code.dxe 

./Debug/Init_code.doj :./Init_code.asm $(ADI_DSP_MAKE)/Blackfin/include/defBF532.h $(ADI_DSP_MAKE)/Blackfin/include/def_LPBlackfin.h $(ADI_DSP_MAKE)/Blackfin/include/defbf533.h 
	@echo ".\Init_code.asm"
	$(VDSP)/easmblkfn.exe .\Init_code.asm -proc ADSP-BF533 -g -si-revision 0.2 -o .\Debug\Init_code.doj -MM

./Debug/Init_code.dxe :./ADSP-BF533_ASM.ldf ./Debug/Init_code.doj 
	@echo "Linking..."
	$(VDSP)/ccblkfn.exe .\Debug\Init_code.doj -T .\ADSP-BF533_ASM.ldf -L .\Debug -flags-link -od,.\Debug -o .\Debug\Init_code.dxe -proc ADSP-BF533 -si-revision 0.2 -flags-link -MM
	
	$(VDSP)/elfloader.exe -b FLASH -f HEX -Width 16 -init .\Debug\Init_code.dxe -o .\Debug\output.ldr -proc ADSP-BF533 ..\DXE1\debug\DXE1.dxe ..\DXE2\debug\DXE2.dxe

endif

ifeq ($(MAKECMDGOALS),Init_code_Debug_clean)

Init_code_Debug_clean:
	$(RM) ".\Debug\Init_code.doj"
	$(RM) ".\Debug\Init_code.dxe"
	$(RM) ".\Debug\*.ipa"
	$(RM) ".\Debug\*.opa"
	$(RM) ".\Debug\*.ti"
	$(RM) ".\*.rbld"

endif