localization.cn.lua

时间太紧了

-- Version : Chinese
-- Translation by : Windrunner

BINDING_HEADER_COOLDOWNCOUNTHEADER					= "魔法冷却时间";
BINDING_NAME_COOLDOWNCOUNT							= "切换魔法冷却时间";

COOLDOWNCOUNT_CONFIG_HEADER							= "魔法冷却时间";
COOLDOWNCOUNT_CONFIG_HEADER_INFO					= "冷却时间设置选项,这是一个在动作条按钮上显示技能冷却时间的插件.";

COOLDOWNCOUNT_ENABLED								= "开启冷却时间显示";
COOLDOWNCOUNT_ENABLED_INFO							= "设置是否开启冷却时间显示.";

COOLDOWNCOUNT_ROGUE_STEALTH							= "盗贼潜行冷却时间";
COOLDOWNCOUNT_ROGUE_STEALTH_INFO					= "开启盗贼潜行按钮上的冷却时间.";

COOLDOWNCOUNT_NOSPACES								= "移除时间数字和单位间的空格";
COOLDOWNCOUNT_NOSPACES_INFO							= "移除时间数字和单位间的空格, 例如, \"19 m\" 将显示为 \"19m\".";

COOLDOWNCOUNT_SIDECOUNT								= "侧边动作条冷却时间偏移量";
COOLDOWNCOUNT_SIDECOUNT_INFO						= "修正侧边动作条上冷却时间的位置.";

COOLDOWNCOUNT_FLASHSPEED							= "闪烁间隔";
COOLDOWNCOUNT_FLASHSPEED_INFO						= "设置冷却时间将结束时的闪烁间隔.";

COOLDOWNCOUNT_FLASHSPEED_SLIDER_DESCRIPTION			= "间隔";
COOLDOWNCOUNT_FLASHSPEED_SLIDER_APPEND				= " 秒(s)";

COOLDOWNCOUNT_HIDEUNTILTIMELEFT						= "隐藏时间直到";
COOLDOWNCOUNT_HIDEUNTILTIMELEFT_INFO				= "隐藏冷却时间直到剩余时间符合指定 (0 = 永久可见).";

COOLDOWNCOUNT_HIDEUNTILTIMELEFT_SLIDER_DESCRIPTION	= "剩余";
COOLDOWNCOUNT_HIDEUNTILTIMELEFT_SLIDER_APPEND		= " 秒(s)";

COOLDOWNCOUNT_HOURS_FORMAT							= "%s h";
COOLDOWNCOUNT_MINUTES_FORMAT						= "%s m";

COOLDOWNCOUNT_HOUR_MINUTES_FORMAT					= "%s:%s";
COOLDOWNCOUNT_MINUTES_SECONDS_FORMAT				= "%s:%s";
COOLDOWNCOUNT_SECONDS_FORMAT						= "%s";

COOLDOWNCOUNT_SECONDS_LONG_FORMAT					= "%s s";

COOLDOWNCOUNT_USERSCALE								= "设置显示比例";
COOLDOWNCOUNT_USERSCALE_INFO						= "设置冷却时间显示的比例,缺省值为1.";
COOLDOWNCOUNT_USERSCALE_SLIDER_DESCRIPTION			= "缩放";
COOLDOWNCOUNT_USERSCALE_SLIDER_APPEND				= " %";

COOLDOWNCOUNT_USELONGTIMERS							= "使用长时间格式";
COOLDOWNCOUNT_USELONGTIMERS_INFO					= "开启长时间格式显示时间.";

COOLDOWNCOUNT_NORMALCOLOR_SET						= "设置颜色";
COOLDOWNCOUNT_NORMALCOLOR_SET_INFO					= "设置冷却时间显示的颜色.";

COOLDOWNCOUNT_FLASHCOLOR_SET						= "设置闪烁颜色";
COOLDOWNCOUNT_FLASHCOLOR_SET_INFO					= "设置冷却时间闪烁时候显示的颜色.";
COOLDOWNCOUNT_SETTEXT								= "设置";

COOLDOWNCOUNT_ALPHA									= "透明度";
COOLDOWNCOUNT_ALPHA_INFO							= "设置冷却时间的透明度.";

COOLDOWNCOUNT_ALPHA_SLIDER_DESCRIPTION				= "透明度";
COOLDOWNCOUNT_ALPHA_SLIDER_APPEND					= " %";


-- Slash Commands

COOLDOWNCOUNT_SLASH_ENABLE							= "enable";
COOLDOWNCOUNT_SLASH_DISABLE							= "disable";
COOLDOWNCOUNT_SLASH_SET								= "set";
COOLDOWNCOUNT_SLASH_FLASHSPEED						= "flash";
COOLDOWNCOUNT_SLASH_SCALE							= "scale";
COOLDOWNCOUNT_SLASH_ALPHA							= "alpha";
COOLDOWNCOUNT_SLASH_NOSPACES						= "space";
COOLDOWNCOUNT_SLASH_NORMALCOLOR						= "normalcolor";
COOLDOWNCOUNT_SLASH_FLASHCOLOR						= "flashcolor";
COOLDOWNCOUNT_SLASH_USELONGTIMERS					= "uselongtimers";
COOLDOWNCOUNT_SLASH_HIDEUNTILTIMELEFT				= "hideuntil";

COOLDOWNCOUNT_PARAM_ON								= "on";
COOLDOWNCOUNT_PARAM_OFF								= "off";
COOLDOWNCOUNT_PARAM_TOGGLE							= "toggle";


COOLDOWNCOUNT_SLASH_USAGE 							= {
	" Usage: /cooldowncount (or /cc) <command> [params]",
	"",
	" Commands:",
	COOLDOWNCOUNT_SLASH_ENABLE.." - 开启冷却时间",
	COOLDOWNCOUNT_SLASH_DISABLE.." - 关闭冷却时间",
	COOLDOWNCOUNT_SLASH_SET.." - 开启/关闭冷却时间",
	COOLDOWNCOUNT_SLASH_FLASHSPEED.." - 设置冷却时间将结束时的闪烁间隔",
	COOLDOWNCOUNT_SLASH_SCALE.." - 设置冷却时间数字的大小比例",
	COOLDOWNCOUNT_SLASH_ALPHA.." - 设置透明度",
	COOLDOWNCOUNT_SLASH_NOSPACES.." - 设置是否在时间数字和单位间显示空格",
	COOLDOWNCOUNT_SLASH_NORMALCOLOR.." - 设置正常显示颜色",
	COOLDOWNCOUNT_SLASH_FLASHCOLOR.." - 设置闪烁显示颜色",
	COOLDOWNCOUNT_SLASH_HIDEUNTILTIMELEFT.." - 隐藏冷却时间直到剩余时间符合指定, 0 禁用",
	COOLDOWNCOUNT_SLASH_USELONGTIMERS.." - 开启长时间格式显示时间"
};

COOLDOWNCOUNT_CHAT_ALPHA_NOT_SPECIFIED				= "冷却时间透明度设置需要你提供一个数值.";

COOLDOWNCOUNT_CHAT_USERSCALE						= "冷却时间显示的比例设置为 %s.";
COOLDOWNCOUNT_CHAT_USERSCALE_NOT_SPECIFIED			= "冷却时间显示比例设置需要你提供一个数值.";

COOLDOWNCOUNT_CHAT_USELONGTIMERS_ENABLED			= "开启长时间格式显示时间.";
COOLDOWNCOUNT_CHAT_USELONGTIMERS_DISABLED			= "关闭长时间格式显示时间.";



COOLDOWNCOUNT_CHAT_ENABLED							= "冷却时间开启.";
COOLDOWNCOUNT_CHAT_DISABLED							= "冷却时间关闭.";

COOLDOWNCOUNT_CHAT_ROGUE_STEALTH_ENABLED			= "盗贼潜行冷却时间开启.";
COOLDOWNCOUNT_CHAT_ROGUE_STEALTH_DISABLED			= "盗贼潜行冷却时间关闭.";

COOLDOWNCOUNT_CHAT_NOSPACES_ENABLED					= "冷却时间无空格模式开启.";
COOLDOWNCOUNT_CHAT_NOSPACES_DISABLED				= "冷却时间无空格模式关闭.";
COOLDOWNCOUNT_CHAT_FLASHSPEED						= "冷却时间闪烁速度设置为 %s.";

COOLDOWNCOUNT_CHAT_COMMAND_MAIN_INFO				= "冷却时间.";
COOLDOWNCOUNT_CHAT_COMMAND_ENABLE_INFO				= "开启/关闭冷却时间计数.";
COOLDOWNCOUNT_CHAT_COMMAND_SIDECOUNT_ENABLE_INFO	= "开启/关闭侧边动作条冷却时间显示位置偏移.";
COOLDOWNCOUNT_CHAT_COMMAND_FLASHSPEED_INFO			= "设置冷却时间将结束时闪烁的时间间隔.";
COOLDOWNCOUNT_CHAT_COMMAND_SCALE_INFO				= "设置冷却时间数字的大小.";

COOLDOWNCOUNT_CHAT_ALPHA_FORMAT						= "冷却时间透明度设置为 %2f";
COOLDOWNCOUNT_CHAT_NORMAL_COLOR_SET					= "冷却时间 - 已设置正常显示颜色.";
COOLDOWNCOUNT_CHAT_FLASH_COLOR_SET					= "冷却时间 - 已设置闪烁显示颜色.";

COOLDOWNCOUNT_CHAT_HIDEUNTILTIMELEFT				= "冷却时间开始显示数值的剩余时间设置为 %d.";
COOLDOWNCOUNT_CHAT_HIDEUNTILTIMELEFT_NOT_SPECIFIED	= "冷却时间剩余时间模式需要你提供一个数值.";


-- Classes

COOLDOWNCOUNT_CLASS_ROGUE							= "盗贼";